设置WCF Webhttp的最大消息和缓冲区大小

问题描述

我目前有一个带有webHttp绑定的WCF服务，我试图通过覆盖config中的默认设置来增加可以输入到该服务的最大大小，我尝试做类似

I currently have a WCF service with webHttp bindings, im attempting to increase the max size that can be inputted to the service by overriding the default settings in config, i have tried doing something like

  <system.serviceModel>
<bindings>
<webHttpBinding>
  <binding name="webHttp" >
  <security mode="Transport">
      <transport clientCredentialType =
             "None"
            proxyCredentialType="None"
            realm="string" />
  </security>
  </binding>

</webHttpBinding>
</bindings>
<services>

  <service name="PrimeStreamInfoServices.Service1" behaviorConfiguration="PrimeStreamInfoServices.Service1Behavior">
    <!-- Service Endpoints -->
    <endpoint address="" binding="webHttpBinding"  contract="PrimeStreamInfoServices.IService1">
      <!--
          Upon deployment, the following identity element should be removed or replaced to reflect the
          identity under which the deployed service runs.  If removed, WCF will infer an appropriate identity
          automatically.
      -->
    </endpoint>
    <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
  </service>
</services>
<behaviors>
  <serviceBehaviors>
    <behavior name="PrimeStreamInfoServices.Service1Behavior">
      <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment -->
      <serviceMetadata httpGetEnabled="true"/>
      <!-- To receive exception details in faults for debugging purposes, set the value below to true.  Set to false before deployment to avoid disclosing exception information -->
      <serviceDebug includeExceptionDetailInFaults="false"/>
    </behavior>
  </serviceBehaviors>
</behaviors>
<diagnostics>

并设置与消息大小有关的其他各种属性，但似乎没有任何作用，有人甚至可以更改webHttp绑定的消息大小吗?有什么建议?谢谢！

and setting various other properties pertaining to message size but none seems to be working, can one even change the m essage size of a webHttp binding?Any suggestions? Thanks!

推荐答案

根据您的设置，有很多设置可能会产生影响-请尝试以下操作:

There's a multitude of settings that might have an influence depending on your settings - try this:

<bindings>
  <webHttpBinding>
    <binding name="LargeWeb"
             maxBufferPoolSize="1500000"
             maxReceivedMessageSize="1500000"
             maxBufferSize="1500000">
      <readerQuotas
            maxArrayLength="656000"
            maxBytesPerRead="656000"
            maxDepth="32"
            maxNameTableCharCount="656000"
            maxStringContentLength="656000"
            />
    </binding>
  </webHttpBinding>
</bindings>

通过定义webHttpBinding的版本"并将所有这些参数设置为更高的值，您应该能够(几乎)获得任何消息大小.

By defining your "version" of the webHttpBinding and setting all those parameters to higher values, you should be able to get through any message size (almost).

请注意:这确实使您的系统有可能被大量消息淹没，并因此而屈服(经典的拒绝服务攻击)-这就是将这些限制设置得较低的原因-设计和有目的.

Mind you: this does open up your system to the potential of being flooded with huge messages and thus be brought down to its knees (classic denial-of-service attacks) - that's the reason these limits are set fairly low - by design and on purpose.

您可以将它们更改为更高的值-只需知道自己在做什么以及如果存在安全隐患！

You can change them to higher values - just be aware what you're doing and what the security risks are, if you do!

马克

PS:为了利用这些设置，您当然必须在服务器和客户端配置中引用该绑定配置:

PS: In order to make use of these settings, you of course have to reference that binding configuration in your server and client side configs:

<client>
  <endpoint address="http://localhost"
            binding="webHttpBinding" bindingConfiguration="LargeWeb"
            contract="IMyService" />
</client>
<services>
  <service>
    <endpoint address="http://localhost"
              binding="webHttpBinding" bindingConfiguration="LargeWeb"
              contract="IMyService" />
  </service>
</services>

这篇关于设置WCF Webhttp的最大消息和缓冲区大小的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！