问题描述
我正在尝试使用led显示器显示莫尔斯电码.我需要半秒的光脉冲来表示一个点，而需要1.5秒的光脉冲来表示一个破折号.
I'm trying to make a morse code display using an led. I need a half second pulse of the light to represent a dot and a 1.5 second pulse to represent a dash.
我真的被困在这里.我在FPGA上使用内部50MHz时钟进行了计数.我必须制造的机器将输入3位数字并将其转换为摩斯字母，A-H，A为000，B为001，依此类推.我只需要弄清楚如何告诉FPGA将LED保持指定的时间，然后关闭大约一秒钟(这就是点脉冲和破折号脉冲之间的延迟).
I'm really stuck here. I have made a counter using an internal 50MHz clock on my FPGA. The machine I have to make will take as input a 3 bit number and translate that to a morse letter, A-H with A being 000, B being 001 and so on. I just need to figure out how to tell the FPGA to keep the led on for the specified time and then turn off for about a second (that would be the delay between a dot pulse and a dash pulse).
任何提示将不胜感激.而且，它必须是可综合的.
Any tips would be greatly appreciated.Also, it has to be synthesizable.
这是我的代码.它还没有运行.它不断给我的错误消息是:
Here is my code. It's not functioning yet. The error message it keeps giving me is:
module part4 (SELECT, CLK, CLOCK_50, RESET, led);
input [2:0]SELECT;
input RESET, CLK, CLOCK_50;
output reg led=0;
reg [26:0] COUNT=0; //register that keeps track of count
reg [1:0] COUNT2=0; //keeps track of half seconds
reg halfsecflag=0; //goes high every time half second passes
reg dashflag=0; //goes high every time 1 and half second passes
reg [3:0] code; //1 is dot and 0 is dash. There are 4 total
reg [1:0] c3; //keeps track of the index we are on in the code.
reg [3:0] STATE; //register to keep track of states in the state machine
reg done=0; //a flag that goes up when one morse pulse is done.
reg ending=0; //another flag that goes up when a whole morse letter has flashed
reg [1:0] length; //This is the length of the morse letter. It varies from 1 to 4
wire i; // if i is 1, then the state machine goes to "dot". if 0 "dash"
assign i = code[c3];
parameter START= 4'b000, DOT= 4'b001, DASH= 4'b010, DELAY= 4'b011, IDLE=
4'b100;
parameter A= 3'b000, B=3'b001, C=3'b010, D=3'b011, E=3'b100, F=3'b101,
G=3'b110, H=3'b111;
always @(posedge CLOCK_50 or posedge RESET) //making counter
begin
if (RESET == 1)
COUNT <= 0;
else if (COUNT==8'd25000000)
begin
COUNT <= 0;
halfsecflag <= 1;
end
else
begin
COUNT <= COUNT+1;
halfsecflag <=0;
end
end
always @(posedge CLOCK_50 or posedge RESET)
begin
if (RESET == 1)
COUNT2 <= 0;
else if ((COUNT2==2)&&(halfsecflag==1))
begin
COUNT2 = 0;
dashflag=1;
end
else if (halfsecflag==1)
COUNT2= COUNT2+1;
end
always @(RESET) //asynchronous reset
begin
STATE=IDLE;
end
always@(STATE) //State machine
begin
done=0;
case(STATE)
START: begin
led = 1;
if (i) STATE = DOT;
else STATE = DASH;
end
DOT: begin
if (halfsecflag && ~ending) STATE = DELAY;
else if (ending) STATE= IDLE;
else STATE=DOT;
end
DASH: begin
if ((dashflag)&& (~ending))
STATE = DELAY;
else if (ending)
STATE = IDLE;
else STATE = DASH;
end
DELAY: begin
led = 0;
if ((halfsecflag)&&(ending))
STATE=IDLE;
else if ((halfsecflag)&&(~ending))
begin
done=1;
STATE=START;
end
else STATE = DELAY;
end
IDLE: begin
c3=0;
if (CLK) STATE=START;
else STATE=IDLE;
end
default: STATE = IDLE;
endcase
end
always @(posedge CLK)
begin
case (SELECT)
A: length=2'b01;
B: length=2'b11;
C: length=2'b11;
D: length=2'b10;
E: length=2'b00;
F: length=2'b11;
G: length=2'b10;
H: length=2'b11;
default: length=2'bxx;
endcase
end
always @(posedge CLK)
begin
case (SELECT)
A: code= 4'b0001;
B: code= 4'b1110;
C: code= 4'b1010;
D: code= 4'b0110;
E: code= 4'b0001;
F: code= 4'b1011;
G: code= 4'b0100;
H: code= 4'b1111;
default: code=4'bxxxx;
endcase
end
always @(posedge CLK)
begin
if (c3==length)
begin
c3<=0; ending=1;
end
else if (done)
c3<= c3+1;
end
endmodule
推荐答案
我一直在阅读您的代码，并且有很多问题:
I have been reading your code and there are many issues:
-
代码未格式化.
The code is not formatted.
您未提供测试平台.你写了吗?
You did not provide a test-bench. Did you write one?
无法解析网络的多个常量驱动程序" 在堆栈交换中搜索错误消息.已经问了很多遍了.
"Can't resolve multiple constant drivers for net" Search on stack exchange for the error message. It has been asked many times.
始终使用@(*)而不是例如总是@(STATE)，您会丢失诸如i, halfsecflag, ending之类的信号.但是请参见第6点:您希望在计时部分中使用STATE.
Use always @(*) not e.g. always @(STATE) you are missing signals like i, halfsecflag, ending. But see point 6: You want the STATE in a clocked section.
在始终使用@(posege CLK)的情况下，必须使用非阻塞分配:<=.
Where you use always @(posedge CLK) you must use non-blocking assignments: <=.
在许多使用always @(posedge CLK)的地方要使用always @(*)(例如，在其中设置length和code的地方)相反，在要使用posedge CLK的地方要使用您的国家.
There are many places where you use always @(posedge CLK) where you want to use always @(*) (e.g. where you set length and code) Opposite you want to use a posedge CLK where you work with your STATE.
仅使用一个时钟和一个时钟.请勿使用CLK 和 CLOCK_50.使用其中之一.
Use one clock and one clock only. Do not use CLK and CLOCK_50. Use either one or the other.
照顾您的向量大小.此8'd25000000是错误的，因为您不能在8位中容纳25000000.
Take care of your vector sizes. This 8'd25000000 is wrong as you can no fit 25000000 in 8 bits.
您使用的halfsecflag非常好！我见过很多次人们认为他们可以使用always @(halfsecflag)这是灾难的秘诀！
Your usage of halfsecflag is excellent! I have see many times where people think they can use always @(halfsecflag) which is a recipe for disaster!
在下面，您会找到一小段我重新编写的代码.
Below you find a small piece of your code which I have re-written.
-
所有分配都是非阻塞的
<=
halfsecflag对于仅每半秒操作一次代码至关重要，因此我将其单独放在顶部的单独的if中.我会在整个代码中使用它.
halfsecflag is essential to operate the code only every half a second, so I put that by itself in a separate if at the top. I would use that throughout the code.
所有寄存器都重置，COUNT2和dashflag.
All register are reset, both COUNT2 and dashflag.
dashflag设置为1，但从未设置回0.我已修复该问题.
dashflag was set to 1 but never set back to 0. I fixed that.
我指定了向量大小.它使代码不起毛的证明".
I specified the vector sizes. It makes the code "Lint proof".
在这里:
always @(posedge CLOCK_50 or posedge RESET)
begin
if (RESET == 1'b1)
begin
COUNT2 <= 2'd00;
dashflag <= 1'b0;
end // reset
else if (halfsecflag) // or if (halfsecflag==1'b1)
begin
if (COUNT2==2'd2))
begin
COUNT2 <= 2'd0;
dashflag <=1'b1;
end
else
begin
COUNT2 <= COUNT2+2'd1;
dashflag <=1'b0;
end
end // clocked
end // always
以相同的方式开始修复其余代码.编写测试平台，在出现问题的波形显示器上进行仿真和跟踪.
Start fixing the rest of your code the same way. Write a test-bench, simulate and trace on a waveform display where things go wrong.
这篇关于如何在Verilog中设置延迟?的文章就介绍到这了，希望我们推荐的答案对大家有所帮助，也希望大家多多支持！