python - Scapy show2()数据包问题

我正在尝试创建一些scapy层，并希望它们在飞行中调整它们的大小。我使用以下代码：

class Foo(Packet):
name = "Testpacket"
fields_desc = [
         ByteField("length", None),
         ByteField("byte2", None),
         ByteField("byte3", None),
         ByteField("byte4", None),
         ByteField("byte5", None),
         ByteField("byte6", None),
         ByteField("byte7", None),
         ByteField("byte8", None),
         ByteField("byte9", None),
         ByteField("byte10", None),
         ByteField("byte11", None)
         ]

def post_build(self, p, pay):
    if self.length is None:
        if self.byte11 is not None:
            x = 0xa
        elif self.byte10 is not None:
            x = 0x9
        elif self.byte9 is not None:
            x = 0x8
        elif self.byte8 is not None:
            x = 0x7
        elif self.byte7 is not None:
            x = 0x6
        elif self.byte6 is not None:
            x = 0x5
        elif self.byte5 is not None:
            x = 0x4
        elif self.byte4 is not None:
            x = 0x3
        elif self.byte3 is not None:
            x = 0x2
        elif self.byte2 is not None:
            x = 0x1
            print "byte2 is set, x is %s"%(x,)
        else:
            x = 0x0
    p = p[:0] + struct.pack(">b", x)
    p += pay
    return p

当我在scapy解释器中执行以下操作时：
>>> aa=Foo(); aa.byte2=0x14; aa.show2();
我得到：

>>> aa=Foo(); aa.byte2=0x14; aa.show2(); aa.show();
###[ Testpacket ]###
  length= 1
  byte2= None
  byte3= None
  byte4= None
  byte5= None
  byte6= None
  byte7= None
  byte8= None
  byte9= None
  byte10= None
  byte11= None
###[ Testpacket ]###
  length= None
  byte2= 20
  byte3= None
  byte4= None
  byte5= None
  byte6= None
  byte7= None
  byte8= None
  byte9= None
  byte10= None
  byte11= None

现在，根据我的理解，show2（）应该计算包的长度等。在我的例子中，这应该设置length和byte2。不幸的是，事实并非如此。知道我做错了什么吗？我已经搜索了几个小时的错误，我已经没有主意了：-任何建议都是欢迎的。
致以最诚挚的问候

最佳答案

马丁，你的理解错了。。。.show2()在组装后计算数据包。.show()不应该计算长度。。。例如，使用IP。。。

>>> from scapy.all import IP
>>> bar = IP(dst='4.2.2.2')/"Yo mama is ugly.  So ugly.  Aaahhhhhh my eyes"

.show2()的结果。。。

>>> bar.show2()
###[ IP ]###
  version   = 4L
  ihl       = 5L
  tos       = 0x0
  len       = 65
  id        = 1
  flags     =
  frag      = 0L
  ttl       = 64
  proto     = ip
  chksum    = 0x6b45
  src       = 10.109.61.6
  dst       = 4.2.2.2
  \options   \
###[ Raw ]###
     load      = 'Yo mama is ugly.  So ugly.  Aaahhhhhh my eyes'
>>>

.show()的结果。。。注意ihl、len和chksum都是None。。

>>> bar.show()
###[ IP ]###
  version   = 4
  ihl       = None  <-------
  tos       = 0x0
  len       = None  <-------
  id        = 1
  flags     =
  frag      = 0
  ttl       = 64
  proto     = ip
  chksum    = None  <-------
  src       = 10.109.61.6
  dst       = 4.2.2.2
  \options   \
###[ Raw ]###
     load      = 'Yo mama is ugly.  So ugly.  Aaahhhhhh my eyes'
>>>

关于python - Scapy show2()数据包问题，我们在Stack Overflow上找到一个类似的问题：https://stackoverflow.com/questions/6545620/