我正在从二维点（x，y）计算一系列索引。一个指标是小轴与长轴之比。为了适合椭圆，我使用以下post
当我运行这些函数时，最后的结果看起来很奇怪，因为中心和轴的长度与2D点不成比例。
center = [ 560415.53298363+0.j 6368878.84576771+0.j]
angle of rotation = (-0.0528033467597-5.55111512313e-17j)
axes = [0.00000000-557.21553487j 6817.76933256 +0.j]
提前谢谢你的帮助
import numpy as np
from numpy.linalg import eig, inv
def fitEllipse(x,y):
x = x[:,np.newaxis]
y = y[:,np.newaxis]
D = np.hstack((x*x, x*y, y*y, x, y, np.ones_like(x)))
S = np.dot(D.T,D)
C = np.zeros([6,6])
C[0,2] = C[2,0] = 2; C[1,1] = -1
E, V = eig(np.dot(inv(S), C))
n = np.argmax(np.abs(E))
a = V[:,n]
return a
def ellipse_center(a):
b,c,d,f,g,a = a[1]/2, a[2], a[3]/2, a[4]/2, a[5], a[0]
num = b*b-a*c
x0=(c*d-b*f)/num
y0=(a*f-b*d)/num
return np.array([x0,y0])
def ellipse_angle_of_rotation( a ):
b,c,d,f,g,a = a[1]/2, a[2], a[3]/2, a[4]/2, a[5], a[0]
return 0.5*np.arctan(2*b/(a-c))
def ellipse_axis_length( a ):
b,c,d,f,g,a = a[1]/2, a[2], a[3]/2, a[4]/2, a[5], a[0]
up = 2*(a*f*f+c*d*d+g*b*b-2*b*d*f-a*c*g)
down1=(b*b-a*c)*( (c-a)*np.sqrt(1+4*b*b/((a-c)*(a-c)))-(c+a))
down2=(b*b-a*c)*( (a-c)*np.sqrt(1+4*b*b/((a-c)*(a-c)))-(c+a))
res1=np.sqrt(up/down1)
res2=np.sqrt(up/down2)
return np.array([res1, res2])
if __name__ == '__main__':
points = [(560036.4495758876, 6362071.890493258),
(560036.4495758876, 6362070.890493258),
(560036.9495758876, 6362070.890493258),
(560036.9495758876, 6362070.390493258),
(560037.4495758876, 6362070.390493258),
(560037.4495758876, 6362064.890493258),
(560036.4495758876, 6362064.890493258),
(560036.4495758876, 6362063.390493258),
(560035.4495758876, 6362063.390493258),
(560035.4495758876, 6362062.390493258),
(560034.9495758876, 6362062.390493258),
(560034.9495758876, 6362061.390493258),
(560032.9495758876, 6362061.390493258),
(560032.9495758876, 6362061.890493258),
(560030.4495758876, 6362061.890493258),
(560030.4495758876, 6362061.390493258),
(560029.9495758876, 6362061.390493258),
(560029.9495758876, 6362060.390493258),
(560029.4495758876, 6362060.390493258),
(560029.4495758876, 6362059.890493258),
(560028.9495758876, 6362059.890493258),
(560028.9495758876, 6362059.390493258),
(560028.4495758876, 6362059.390493258),
(560028.4495758876, 6362058.890493258),
(560027.4495758876, 6362058.890493258),
(560027.4495758876, 6362058.390493258),
(560026.9495758876, 6362058.390493258),
(560026.9495758876, 6362057.890493258),
(560025.4495758876, 6362057.890493258),
(560025.4495758876, 6362057.390493258),
(560023.4495758876, 6362057.390493258),
(560023.4495758876, 6362060.390493258),
(560023.9495758876, 6362060.390493258),
(560023.9495758876, 6362061.890493258),
(560024.4495758876, 6362061.890493258),
(560024.4495758876, 6362063.390493258),
(560024.9495758876, 6362063.390493258),
(560024.9495758876, 6362064.390493258),
(560025.4495758876, 6362064.390493258),
(560025.4495758876, 6362065.390493258),
(560025.9495758876, 6362065.390493258),
(560025.9495758876, 6362065.890493258),
(560026.4495758876, 6362065.890493258),
(560026.4495758876, 6362066.890493258),
(560026.9495758876, 6362066.890493258),
(560026.9495758876, 6362068.390493258),
(560027.4495758876, 6362068.390493258),
(560027.4495758876, 6362068.890493258),
(560027.9495758876, 6362068.890493258),
(560027.9495758876, 6362069.390493258),
(560028.4495758876, 6362069.390493258),
(560028.4495758876, 6362069.890493258),
(560033.4495758876, 6362069.890493258),
(560033.4495758876, 6362070.390493258),
(560033.9495758876, 6362070.390493258),
(560033.9495758876, 6362070.890493258),
(560034.4495758876, 6362070.890493258),
(560034.4495758876, 6362071.390493258),
(560034.9495758876, 6362071.390493258),
(560034.9495758876, 6362071.890493258),
(560036.4495758876, 6362071.890493258)]
a_points = np.array(points)
x = a_points[:, 0]
y = a_points[:, 1]
from pylab import *
plot(x,y)
show()
a = fitEllipse(x,y)
center = ellipse_center(a)
phi = ellipse_angle_of_rotation(a)
axes = ellipse_axis_length(a)
print "center = ", center
print "angle of rotation = ", phi
print "axes = ", axes
from pylab import *
plot(x,y)
plot(center[0:1],center[1:], color = 'red')
show()
每个顶点是一个Xi，y，i点
二维点和拟合椭圆中心的绘制
使用OpenCV可以得到以下结果：
import cv
PointArray2D32f = cv.CreateMat(1, len(points), cv.CV_32FC2)
for (i, (x, y)) in enumerate(points):
PointArray2D32f[0, i] = (x, y)
# Fits ellipse to current contour.
(center, size, angle) = cv.FitEllipse2(PointArray2D32f)
(center, size, angle)
((560030.625, 6362066.5),(10.480490684509277, 17.20206642150879),144.34889221191406)
最佳答案
由于与值之间的变化相比，fitEllipse和x的值非常大，y的计算返回的结果是假的。例如，如果您尝试打印特征值E，您将看到
array([ 0.00000000e+00 +0.00000000e+00j,
0.00000000e+00 +0.00000000e+00j,
0.00000000e+00 +0.00000000e+00j,
-1.36159790e-12 +8.15049878e-12j,
-1.36159790e-12 -8.15049878e-12j, 1.18685632e-11 +0.00000000e+00j])
它们几乎都是零！显然这里有某种数值上的误差。
您可以通过将数据的平均值移动到接近零的位置来解决此问题，从而使值的大小更为“正常”，并且数字之间的差异变得更为显著。
x = a_points[:, 0]
y = a_points[:, 1]
xmean = x.mean()
ymean = y.mean()
x = x-xmean
y = y-ymean
然后可以成功地找到中心、phi和轴，然后将中心重新移回（xmean，ymean）：
center = ellipse_center(a)
center[0] += xmean
center[1] += ymean
import numpy as np
import numpy.linalg as linalg
import matplotlib.pyplot as plt
def fitEllipse(x,y):
x = x[:,np.newaxis]
y = y[:,np.newaxis]
D = np.hstack((x*x, x*y, y*y, x, y, np.ones_like(x)))
S = np.dot(D.T,D)
C = np.zeros([6,6])
C[0,2] = C[2,0] = 2; C[1,1] = -1
E, V = linalg.eig(np.dot(linalg.inv(S), C))
n = np.argmax(np.abs(E))
a = V[:,n]
return a
def ellipse_center(a):
b,c,d,f,g,a = a[1]/2, a[2], a[3]/2, a[4]/2, a[5], a[0]
num = b*b-a*c
x0=(c*d-b*f)/num
y0=(a*f-b*d)/num
return np.array([x0,y0])
def ellipse_angle_of_rotation( a ):
b,c,d,f,g,a = a[1]/2, a[2], a[3]/2, a[4]/2, a[5], a[0]
return 0.5*np.arctan(2*b/(a-c))
def ellipse_axis_length( a ):
b,c,d,f,g,a = a[1]/2, a[2], a[3]/2, a[4]/2, a[5], a[0]
up = 2*(a*f*f+c*d*d+g*b*b-2*b*d*f-a*c*g)
down1=(b*b-a*c)*( (c-a)*np.sqrt(1+4*b*b/((a-c)*(a-c)))-(c+a))
down2=(b*b-a*c)*( (a-c)*np.sqrt(1+4*b*b/((a-c)*(a-c)))-(c+a))
res1=np.sqrt(up/down1)
res2=np.sqrt(up/down2)
return np.array([res1, res2])
def find_ellipse(x, y):
xmean = x.mean()
ymean = y.mean()
x -= xmean
y -= ymean
a = fitEllipse(x,y)
center = ellipse_center(a)
center[0] += xmean
center[1] += ymean
phi = ellipse_angle_of_rotation(a)
axes = ellipse_axis_length(a)
x += xmean
y += ymean
return center, phi, axes
if __name__ == '__main__':
points = [(560036.4495758876, 6362071.890493258),
(560036.4495758876, 6362070.890493258),
(560036.9495758876, 6362070.890493258),
(560036.9495758876, 6362070.390493258),
(560037.4495758876, 6362070.390493258),
(560037.4495758876, 6362064.890493258),
(560036.4495758876, 6362064.890493258),
(560036.4495758876, 6362063.390493258),
(560035.4495758876, 6362063.390493258),
(560035.4495758876, 6362062.390493258),
(560034.9495758876, 6362062.390493258),
(560034.9495758876, 6362061.390493258),
(560032.9495758876, 6362061.390493258),
(560032.9495758876, 6362061.890493258),
(560030.4495758876, 6362061.890493258),
(560030.4495758876, 6362061.390493258),
(560029.9495758876, 6362061.390493258),
(560029.9495758876, 6362060.390493258),
(560029.4495758876, 6362060.390493258),
(560029.4495758876, 6362059.890493258),
(560028.9495758876, 6362059.890493258),
(560028.9495758876, 6362059.390493258),
(560028.4495758876, 6362059.390493258),
(560028.4495758876, 6362058.890493258),
(560027.4495758876, 6362058.890493258),
(560027.4495758876, 6362058.390493258),
(560026.9495758876, 6362058.390493258),
(560026.9495758876, 6362057.890493258),
(560025.4495758876, 6362057.890493258),
(560025.4495758876, 6362057.390493258),
(560023.4495758876, 6362057.390493258),
(560023.4495758876, 6362060.390493258),
(560023.9495758876, 6362060.390493258),
(560023.9495758876, 6362061.890493258),
(560024.4495758876, 6362061.890493258),
(560024.4495758876, 6362063.390493258),
(560024.9495758876, 6362063.390493258),
(560024.9495758876, 6362064.390493258),
(560025.4495758876, 6362064.390493258),
(560025.4495758876, 6362065.390493258),
(560025.9495758876, 6362065.390493258),
(560025.9495758876, 6362065.890493258),
(560026.4495758876, 6362065.890493258),
(560026.4495758876, 6362066.890493258),
(560026.9495758876, 6362066.890493258),
(560026.9495758876, 6362068.390493258),
(560027.4495758876, 6362068.390493258),
(560027.4495758876, 6362068.890493258),
(560027.9495758876, 6362068.890493258),
(560027.9495758876, 6362069.390493258),
(560028.4495758876, 6362069.390493258),
(560028.4495758876, 6362069.890493258),
(560033.4495758876, 6362069.890493258),
(560033.4495758876, 6362070.390493258),
(560033.9495758876, 6362070.390493258),
(560033.9495758876, 6362070.890493258),
(560034.4495758876, 6362070.890493258),
(560034.4495758876, 6362071.390493258),
(560034.9495758876, 6362071.390493258),
(560034.9495758876, 6362071.890493258),
(560036.4495758876, 6362071.890493258)]
fig, axs = plt.subplots(2, 1, sharex = True, sharey = True)
a_points = np.array(points)
x = a_points[:, 0]
y = a_points[:, 1]
axs[0].plot(x,y)
center, phi, axes = find_ellipse(x, y)
print "center = ", center
print "angle of rotation = ", phi
print "axes = ", axes
axs[1].plot(x, y)
axs[1].scatter(center[0],center[1], color = 'red', s = 100)
axs[1].set_xlim(x.min(), x.max())
axs[1].set_ylim(y.min(), y.max())
plt.show()