在哥哥的帮助下,我制作了这个小闹钟。昨晚我尝试了一下,没有nonBlockingRawInput,但效果很好,但是有了nonBlockingRawInput,它没有用。今天,我已经尝试过了,但是它们都不起作用!我将使用nonBlockingRawInput和“non”文件发布该代码。如果您想要不带nonBlockingRawInput的代码,请询问。

提前致谢。

警报rpi.py :

import time
import os
from non import nonBlockingRawInput

name = input("Enter your name.")

print("Hello, " + name)

alarm_HH = input("Enter the hour you want to wake up at")
alarm_MM = input("Enter the minute you want to wake up at")

print("You want to wake up at " + alarm_HH + ":" + alarm_MM)

while True:
    now = time.localtime()
    if now.tm_hour == int(alarm_HH) and now.tm_min == int(alarm_MM):
        print("ALARM NOW!")
        os.popen("open mpg321 /home/pi/voltage.mp3")
        break

    else:
        print("no alarm")
    timeout = 60 - now.tm_sec
    if nonBlockingRawInput('', timeout) == 'stop':
        break

non.py :
import signal

class AlarmException(Exception):
    pass

def alarmHandler(signum, frame):
    raise AlarmException

def nonBlockingRawInput(prompt='', timeout=20):
    signal.signal(signal.SIGALRM, alarmHandler)
    signal.alarm(timeout)
    try:
        text = input(prompt)
        signal.alarm(0)
        return text
    except AlarmException:
        pass
    signal.signal(signal.SIGALRM, signal.SIG_IGN)
    return ''

最佳答案

我已经看了您一段时间的代码了。据我了解,您希望能够运行警报,同时还可以在 shell 中键入“停止”以结束程序,为此,您可以使警报成为线程。该线程将检查是否有时间说“ALARM!”。并打开mp3。如果用户未在shell中键入stop,则该线程将进入休眠状态并稍后再次检查。

我基本上使用了您的代码,只是将其放入了警报线程类中:

import time
import os
import threading


class Alarm(threading.Thread):
    def __init__(self, hours, minutes):
        super(Alarm, self).__init__()
        self.hours = int(hours)
        self.minutes = int(minutes)
        self.keep_running = True

    def run(self):
        try:
            while self.keep_running:
                now = time.localtime()
                if (now.tm_hour == self.hours and now.tm_min == self.minutes):
                    print("ALARM NOW!")
                    os.popen("voltage.mp3")
                    return
            time.sleep(60)
        except:
            return
    def just_die(self):
        self.keep_running = False



name = raw_input("Enter your name: ")

print("Hello, " + name)

alarm_HH = input("Enter the hour you want to wake up at: ")
alarm_MM = input("Enter the minute you want to wake up at: ")

print("You want to wake up at: {0:02}:{1:02}").format(alarm_HH, alarm_MM)


alarm = Alarm(alarm_HH, alarm_MM)
alarm.start()

try:
    while True:
         text = str(raw_input())
         if text == "stop":
            alarm.just_die()
            break
except:
    print("Yikes lets get out of here")
    alarm.just_die()

值得注意的是,当线程处于休眠状态时,使用:
time.sleep(60)

然后,您在 shell 中键入stop,线程必须在它意识到已死之前唤醒,因此最坏的情况是您可能需要等待一分钟才能关闭程序!

09-25 22:13