linux - 如何在Linux中删除虚拟接口(interface)？

Closed. This question does not meet Stack Overflow guidelines。它当前不接受答案。












想改善这个问题吗？更新问题，以便将其作为on-topic用于堆栈溢出。

2年前关闭。



Improve this question



ip link显示如下:

[root@0-25-90-68-79-4a log]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether 00:25:90:68:79:4a brd ff:ff:ff:ff:ff:ff
5: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
    link/ether 00:25:90:68:79:4a brd ff:ff:ff:ff:ff:ff
8: gre0: <NOARP> mtu 1476 qdisc noop state DOWN
    link/gre 0.0.0.0 brd 0.0.0.0
10: 35978f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br35978f0 state UP qlen 32
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
13: br35978f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff

在此，接口(interface) 35978f0 是与网桥 br 35978f0 绑定(bind)的虚拟接口(interface)。我已经完成了ifconfig 35978f0 down和brctl delif br35978f0 35978f0。
但是，如何删除界面 35978f0 ？

最佳答案

您可以使用sudo ip link delete删除接口(interface)。