c - glPopMatrix()大喊 "unsupported texture format in setup_hardware_state"

我正在尝试针对Linux的私有(private)视频播放器进行一些优化，以提高性能，因为播放MP4文件在CPU上的负担是，因为视频帧是用YV12 编码的，而OpenGL不提供原生方式显示此格式。现在，有一个代码在CPU上运行，以在将图像发送到GPU进行显示之前将YV12转换为RGB，这会占用100％的CPU处理能力。

我目前正在研究如何解码YV12帧，而不必编写着色器来进行YV12-> RGB转换。据我所知，一种方法是通过 GL_MESA_ycbcr_texture ，显然是我的系统支持的(由glxinfo报告)。

在此Fedora盒中，我有一个ATI Technologies Inc. RV610视频设备[Radeon HD 2400 PRO]，这是一个不错的视频卡。然后，我下载了yuvrect测试，并进行了一些更改以替换此卡支持的纹理GL_TEXTURE_RECTANGLE_NV:GL_TEXTURE_RECTANGLE_ARB。

但是，当我执行此修改后的应用程序时，它输出:

The MESA driver reports *unsupported texture format in setup_hardware_state*

我注意到从glPopMatrix();回调执行Display()时出现此错误。现在，似乎不是我的应用程序中的错误，因为我在另一个具有不同视频卡的Fedora盒(相同系统)上运行了完全相同的代码:英特尔公司Sandy Bridge集成图形 Controller (rev 09)，以及它运作良好。

这两个二进制文件之间唯一可见的区别是它们链接的库。在(有问题的)ATI卡 ldd 报告:

linux-gate.so.1 =>  (0x00da3000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x077bd000)
libGLU.so.1 => /usr/lib/libGLU.so.1 (0x0783b000)
libglut.so.3 => /usr/lib/libglut.so.3 (0x005a9000)
libGLEW.so.1.5 => /usr/lib/libGLEW.so.1.5 (0x00aa3000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x057e2000)
libm.so.6 => /lib/libm.so.6 (0x004e4000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0053f000)
libc.so.6 => /lib/libc.so.6 (0x00358000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x0071b000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x009c5000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00af7000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00b76000)
libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x0014e000)
libdrm.so.2 => /usr/lib/libdrm.so.2 (0x00101000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00510000)
libdl.so.2 => /lib/libdl.so.2 (0x0052d000)
libXi.so.6 => /usr/lib/libXi.so.6 (0x00110000)
/lib/ld-linux.so.2 (0x00337000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00859000)
librt.so.1 => /lib/librt.so.1 (0x00534000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00854000)

同时，在Intel卡上，您可以看到它与libv4l和其他一些库链接，而ATI没有!我想知道这是否与我面临的问题有关:

linux-gate.so.1 =>  (0x008d6000)
/usr/lib/libv4l/v4l1compat.so (0x00345000)
libGL.so.1 => /usr/lib/libGL.so.1 (0x4fb85000)
libGLU.so.1 => /usr/lib/libGLU.so.1 (0x4fc10000)
libglut.so.3 => /usr/lib/libglut.so.3 (0x005a9000)
libGLEW.so.1.5 => /usr/lib/libGLEW.so.1.5 (0x4fc82000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x42ca7000)
libm.so.6 => /lib/libm.so.6 (0x41fbc000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x42017000)
libc.so.6 => /lib/libc.so.6 (0x41e30000)
libv4l1.so.0 => /usr/lib/libv4l1.so.0 (0x00110000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x421f8000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x424c0000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x42c0e000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x42d98000)
libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x432a2000)
libdrm.so.2 => /usr/lib/libdrm.so.2 (0x4247b000)
libpthread.so.0 => /lib/libpthread.so.0 (0x41fe8000)
libdl.so.2 => /lib/libdl.so.2 (0x42005000)
libXi.so.6 => /usr/lib/libXi.so.6 (0x42748000)
/lib/ld-linux.so.2 (0x41e0f000)
libv4l2.so.0 => /usr/lib/libv4l2.so.0 (0x4217c000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x42337000)
librt.so.1 => /lib/librt.so.1 (0x4200c000)
libv4lconvert.so.0 => /usr/lib/libv4lconvert.so.0 (0x42357000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x421f3000)
libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0x43317000)

如果要运行下面的示例，则需要readtex.c，readtex.h和girl.rgb，并使用以下命令对其进行编译:g++ yuvrect.cpp -o yuvrect -lGL -lGLU -lglut -lGLEW

#include <assert.h>
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <GL/glew.h>
#include <GL/glut.h>

#include "readtex.c"   /* I know, this is a hack. */

#define TEXTURE_FILE "girl.rgb"

static GLfloat Xrot = 0, Yrot = 0, Zrot = 0;
static GLint ImgWidth, ImgHeight;
static GLushort *ImageYUV = NULL;


static void DrawObject(void)
{
   glBegin(GL_QUADS);

   glTexCoord2f(0, 0);
   glVertex2f(-1.0, -1.0);

   glTexCoord2f(ImgWidth, 0);
   glVertex2f(1.0, -1.0);

   glTexCoord2f(ImgWidth, ImgHeight);
   glVertex2f(1.0, 1.0);

   glTexCoord2f(0, ImgHeight);
   glVertex2f(-1.0, 1.0);

   glEnd();
}


static void Display( void )
{
   glClear( GL_COLOR_BUFFER_BIT );

   glPushMatrix();
      glRotatef(Xrot, 1.0, 0.0, 0.0);
      glRotatef(Yrot, 0.0, 1.0, 0.0);
      glRotatef(Zrot, 0.0, 0.0, 1.0);
      DrawObject();
   glPopMatrix(); // <--- error message comes from this call

   glutSwapBuffers();
}


static void Reshape( int width, int height )
{
   glViewport( 0, 0, width, height );
   glMatrixMode( GL_PROJECTION );
   glLoadIdentity();
   glFrustum( -1.0, 1.0, -1.0, 1.0, 10.0, 100.0 );
   glMatrixMode( GL_MODELVIEW );
   glLoadIdentity();
   glTranslatef( 0.0, 0.0, -15.0 );
}


static void Key( unsigned char key, int x, int y )
{
   (void) x;
   (void) y;
   switch (key) {
      case 27:
         exit(0);
         break;
   }
   glutPostRedisplay();
}


static void SpecialKey( int key, int x, int y )
{
   float step = 3.0;
   (void) x;
   (void) y;

   switch (key) {
      case GLUT_KEY_UP:
         Xrot += step;
         break;
      case GLUT_KEY_DOWN:
         Xrot -= step;
         break;
      case GLUT_KEY_LEFT:
         Yrot += step;
         break;
      case GLUT_KEY_RIGHT:
         Yrot -= step;
         break;
   }
   glutPostRedisplay();
}

static void Init( int argc, char *argv[] )
{
   GLuint texObj = 100;
   const char *file;

   printf("Checking GL_ARB_texture_rectangle\n");
   if (!glutExtensionSupported("GL_ARB_texture_rectangle")) {
      printf("Sorry, GL_NV_texture_rectangle is required\n");
      exit(0);
   }

   printf("Checking GL_MESA_ycbcr_texture\n");
   if (!glutExtensionSupported("GL_MESA_ycbcr_texture")) {
      printf("Sorry, GL_MESA_ycbcr_texture is required\n");
      exit(0);
   }

   glPixelStorei(GL_UNPACK_ALIGNMENT, 1);

   glBindTexture(GL_TEXTURE_RECTANGLE_ARB, texObj);
#ifdef LINEAR_FILTER
   /* linear filtering looks much nicer but is much slower for Mesa */
   glTexParameteri(GL_TEXTURE_RECTANGLE_ARB, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
   glTexParameteri(GL_TEXTURE_RECTANGLE_ARB, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
#else
   glTexParameteri(GL_TEXTURE_RECTANGLE_ARB, GL_TEXTURE_MIN_FILTER, GL_NEAREST);
   glTexParameteri(GL_TEXTURE_RECTANGLE_ARB, GL_TEXTURE_MAG_FILTER, GL_NEAREST);
#endif

   if (argc > 1)
      file = argv[1];
   else
      file = TEXTURE_FILE;

   ImageYUV = LoadYUVImage(file, &ImgWidth, &ImgHeight);
   if (!ImageYUV) {
      printf("Couldn't read %s\n", TEXTURE_FILE);
      exit(0);
   }

   printf("Image: %dx%d\n", ImgWidth, ImgHeight);

   printf("Calling glTexImage2D\n");
   glTexImage2D(GL_TEXTURE_RECTANGLE_ARB, 0,
                GL_YCBCR_MESA, ImgWidth, ImgHeight, 0,
                GL_YCBCR_MESA, GL_UNSIGNED_SHORT_8_8_MESA, ImageYUV);
   printf("Called glTexImage2D\n");
   assert(glGetError() == GL_NO_ERROR);
   printf("* Assert #1\n");

   glTexSubImage2D(GL_TEXTURE_RECTANGLE_ARB, 0,
                   0, 0, ImgWidth, ImgHeight,
                   GL_YCBCR_MESA, GL_UNSIGNED_SHORT_8_8_MESA, ImageYUV);

   assert(glGetError() == GL_NO_ERROR);
   printf("* Assert #2\n");

   glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE);

   glEnable(GL_TEXTURE_RECTANGLE_ARB);

   glShadeModel(GL_FLAT);
   glClearColor(0.3, 0.3, 0.4, 1.0);

   if (argc > 1 && strcmp(argv[1], "-info")==0) {
      printf("GL_RENDERER   = %s\n", (char *) glGetString(GL_RENDERER));
      printf("GL_VERSION    = %s\n", (char *) glGetString(GL_VERSION));
      printf("GL_VENDOR     = %s\n", (char *) glGetString(GL_VENDOR));
      printf("GL_EXTENSIONS = %s\n", (char *) glGetString(GL_EXTENSIONS));
   }
}


int main( int argc, char *argv[] )
{
   glutInit( &argc, argv );
   glutInitWindowSize( 300, 300 );
   glutInitWindowPosition( 0, 0 );
   glutInitDisplayMode( GLUT_RGB | GLUT_DOUBLE );
   glutCreateWindow(argv[0] );
   glewInit();

   Init( argc, argv );

   glutReshapeFunc( Reshape );
   glutKeyboardFunc( Key );
   glutSpecialFunc( SpecialKey );
   glutDisplayFunc( Display );

   glutMainLoop();
   return 0;
}

各位，有解决这个问题的提示吗？

最佳答案

这很可能是由于驱动程序错误或其他原因造成的。我不会帮你的。但是，放弃着色器是不值得的。使用着色器，您可以省去GL_MESA_ycbcr_texture并使您的应用程序更兼容。

我们将使用普通的旧GL_LUMINANCE_ALPHA格式，因此图像加载将变为:

glTexImage2D(GL_TEXTURE_RECTANGLE_ARB, 0,
            GL_LUMINANCE_ALPHA, ImgWidth, ImgHeight, 0,
            GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, ImageYUV);

glTexSubImage2D(GL_TEXTURE_RECTANGLE_ARB, 0,
               0, 0, ImgWidth, ImgHeight,
               GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, ImageYUV);

然后关于着色器:

static const char *p_s_vertex_shader =
    "varying vec2 t;"
    "void main()"
    "{"
    "    t = gl_MultiTexCoord0.xy;"
    "    gl_Position = ftransform();"
    "}";
static const char *p_s_fragment_shader =
    "#extension GL_ARB_texture_rectangle : enable\n"
    "varying vec2 t;"
    "uniform sampler2DRect tex;"
    "void main()"
    "{"
    "    vec2 tcEven = vec2(floor(t.x * .5) * 2.0, t.y);"
    "    vec2 tcOdd = vec2(tcEven.x + 1.0, t.y);"
    "    float Cb = texture2DRect(tex, tcEven).x - .5;"
    "    float Cr = texture2DRect(tex, tcOdd).x - .5;"
    "    float y = texture2DRect(tex, t).w;" // redundant texture read optimized away by texture cache
    "    float r = y + 1.28033 * Cr;"
    "    float g = y - .21482 * Cb - .38059 * Cr;"
    "    float b = y + 2.12798 * Cb;"
    "    gl_FragColor = vec4(r, g, b, 1.0);"
    "}";
int v = glCreateShader(GL_VERTEX_SHADER);
int f = glCreateShader(GL_FRAGMENT_SHADER);
int p = glCreateProgram();
glShaderSource(v, 1, &p_s_vertex_shader, 0);
glShaderSource(f, 1, &p_s_fragment_shader, 0);
glCompileShader(v);
//CheckShader(v);
glCompileShader(f);
//CheckShader(f);
glAttachShader(p, v);
glAttachShader(p, f);
glLinkProgram(p);
glUseProgram(p);
glUniform1i(glGetUniformLocation(p, "tex"), 0);

这是在贴图之后，在Init()末尾的某个地方。就是这样，就像一个魅力。为了进行调试，最好还包括CheckShader()(它会报告着色器中的编译错误):

bool CheckShader(int n_shader_object)
{
    int n_tmp;
    glGetShaderiv(n_shader_object, GL_COMPILE_STATUS, &n_tmp);
    bool b_compiled = n_tmp == GL_TRUE;
    int n_log_length;
    glGetShaderiv(n_shader_object, GL_INFO_LOG_LENGTH, &n_log_length);
    // query status ...

    if(n_log_length > 1) {
        char *p_s_temp_info_log;
        if(!(p_s_temp_info_log = (char*)malloc(n_log_length)))
            return false;
        int n_tmp;
        glGetShaderInfoLog(n_shader_object, n_log_length, &n_tmp,
            p_s_temp_info_log);
        assert(n_tmp <= n_log_length);

        fprintf(stderr, "%s\n", p_s_temp_info_log);
        free(p_s_temp_info_log);
    }
    // get/concat info-log

    return b_compiled;
}

着色器版本可能会比硬件优化的版本慢一些，但是我不必担心。

如果您决定尝试一下该代码，并且对它有任何疑问，请告诉我...

编辑:实际上在ATi上运行此问题，最后发现传递可变变量“t”时出错，换句话说，这是行不通的:

static const char *p_s_vertex_shader =
    "varying vec2 t;"
    "void main()"
    "{"
    "    t = gl_MultiTexCoord0.xy;"
    "    gl_Position = ftransform();"
    "}";
static const char *p_s_fragment_shader =
    "#extension GL_ARB_texture_rectangle : enable\n"
    "varying vec2 t;"
    "uniform sampler2DRect tex;"
    "void main()"
    "{"
    "    gl_FragColor = texture2DRect(tex, t);"
    "}";

为了轻松解决此问题，只需删除顶点着色器，然后让固定的管道写入纹理坐标即可。因此，这也适用于ATi:

static const char *p_s_vertex_shader = null; // no vertex shader
static const char *p_s_fragment_shader =
    "#extension GL_ARB_texture_rectangle : enable\n"
    "uniform sampler2DRect tex;"
    "void main()"
    "{"
    "    vec2 t = gl_TexCoord[0];" // use fixed pipeline output
    "    gl_FragColor = texture2DRect(tex, t);"
    "}";

关于c - glPopMatrix()大喊 "unsupported texture format in setup_hardware_state"，我们在Stack Overflow上找到一个类似的问题：https://stackoverflow.com/questions/8927546/