python -/: '_io.TextIOWrapper' and 'float' 不受支持的操作数类型

尝试编译以下程序时收到错误消息。目的是分析非线性摆和一个特定的Poincare截面的行为。我试图将有关摆的行为的数据打印到一个文件，并将与Poincare部分相对应的输出打印到另一个文件。

python shell中列出的错误如下:

Traceback (most recent call last):
File "C:\Python32\Lib\site-packages\visual\examples\JMB312.py", line 39
    thetaDotDot = -(g / L) * sin(theta) - q * thetaDot + Fd * sin(Ohm * t)
TypeError: unsupported operand type(s) for /: '_io.TextIOWrapper' and 'float'

我真的不明白为什么在此错误中指出io.TextIOWrapper或如何解决该问题。任何帮助表示赞赏!

码:

from visual import *
from visual.graph import *

scene.title = 'Pendulum'
scene.autoscale = False
scene.height = scene.width = 500
pivot = array([0,0,0])      # pivot position of pendulum
scene.center = pivot            # center scene on pendulum pivot
framesPerSecond = 400

myWindow1 = gdisplay(x=500, title = "Phase Space", xtitle="Theta", ytitle="ThetaDot", height=500, width=500)
f1 = gdots(gdisplay=myWindow1, color = color.cyan, size = 1)

myWindow2 = gdisplay(title="Poincare Section", xtitle="Theta", ytitle="ThetaDot",y=400, x=500, height=500, width=500)
f2 = gdots(gdisplay=myWindow2, color = color.yellow)

#initial conditions for pendulum 1
g = 9.8         # gravity
m = 1           # mass at end of rod
L = 9.8         # length of rod
theta = 0.2     # initial angle (from vertical)
thetaDot = 0    # start pendulum at rest
thetaDotDot = 0 # acceletation
dt = 0.04       # time step
t = 0           # time
Fd = 1.2        # drive force coefficient
Ohm = 2/3       # oscillatory coefficient for drive force
q = 0.5         # coefficient of friction

#pendulum 1 rod
rod = cylinder(pos=pivot, axis = (L*sin(theta),-L*cos(theta),0), radius = 0.1, color=color.cyan)

f=open('JMB312 data 1.txt','w')

g=open('JMB312 data 2.txt','w')

while t < 100000: #a lot of data
    thetaDotDot = -(g / L) * sin(theta) - q * thetaDot + Fd * sin(Ohm * t)
    thetaDot = thetaDot + thetaDotDot * dt
    theta = theta + thetaDot * dt

    time = str(t)
    angle = str(theta)
    angular_velocity = str(thetaDot)

    if t < 750:
        f.write(time)
        f.write(",")
        f.write(angle)
        f.write(",")
        f.write(angular_velocity)
        f.write("\n")

    f1.plot(pos=(theta,thetaDot))

    if -dt**2/4 < Fd * sin(Ohm * t) < dt**2/4: #print poincare section data to separate file
        g.write(time)
        g.write(",")
        g.write(angle)
        g.write(",")
        g.write(angular_velocity)
        g.write("\n")

        f2.plot(pos=(theta,thetaDot))

    if theta > 2 * pi:
        theta = theta - 2 * pi
    if theta < -2 * pi:
        theta = theta + 2 * pi

    rod.axis = (L*sin(theta), -L*cos(theta), 0)

    t = t+dt
g.close()
f.close()

最佳答案

您正在使用g来存储重力并打开文件，将g=open('JMB312 data 2.txt', 'w')行中的名称更改为其他值，它应该可以工作。