我想知道是否有人可以提供帮助,所以我在服务器上安装了vsftpd,可以查看,下载和访问所有文件,但无法编辑,上传或创建任何新文件/文件夹。

我已经检查了权限并将selinux设置为允许模式,但仍然无法编写。

这是我的vsftpd.conf。我可能做错了一些不允许我写的东西吗?

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
# When SELinux is enforcing check for SE bool ftp_home_dir
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write,     allow_ftpd_full_access
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/xferlog
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do  ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses.  Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
chroot_local_user=YES
# chroot_list_enable=YES
# (default follows)
# chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=NO
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
# Make sure, that one of the listen options is commented !!
listen_ipv6=YES

local_enable=YES
pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES

pasv_enable=YES

guest_enable=YES
guest_username=ftp

anon_other_write_enable=YES
anon_umask=022

local_root=/srv/www/


日志文件

Thu Mar 19 14:43:58 2015 1 ::ffff:78.47.143.141 0 /stolenmx.com b _ o r  stolenftp ftp 0 * i
Thu Mar 19 14:44:04 2015 1 ::ffff:78.47.143.141 0 /stolenmx.com b _ o r stolenftp ftp 0 * i
Thu Mar 19 14:44:28 2015 1 ::ffff:78.47.143.141 0 /stolenmx.com b _ o r stolenftp ftp 0 * i
Thu Mar 19 14:51:20 2015 1 ::ffff:78.47.143.141 20698  /forum/styles/prosilver/theme/colours.css a _ o r stolenftp ftp 0 * c
Thu Mar 19 14:53:25 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o r stolenftp ftp 0 * c
Thu Mar 19 14:54:30 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i r stolenftp ftp 0 * i
Thu Mar 19 15:06:38 2015 1 ::ffff:78.47.143.141 0 /stolenmx.com b _ o r stolenftp ftp 0 * i
Thu Mar 19 15:14:55 2015 1 ::ffff:78.47.143.141 667  /forum/styles/prosilver/theme/stylesheet.css a _ o r stolenftp ftp 0 * c
Thu Mar 19 15:15:23 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i r stolenftp ftp 0 * i
Thu Mar 19 15:15:53 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i r stolenftp ftp 0 * i
Thu Mar 19 15:16:04 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i r stolenftp ftp 0 * i
Thu Mar 19 15:17:28 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i r stolenftp ftp 0 * i
Thu Mar 19 15:26:03 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i g stolenftp ftp 0 * i
Thu Mar 19 15:26:13 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i g stolenftp ftp 0 * i
Thu Mar 19 15:27:32 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g luke ftp 0 * c
Thu Mar 19 15:27:59 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g luke ftp 0 * c
Thu Mar 19 15:28:42 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g stolenftp ftp 0 * c
Thu Mar 19 15:28:47 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i g stolenftp ftp 0 * i
Thu Mar 19 15:29:45 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g stolenftp ftp 0 * c
Thu Mar 19 15:29:51 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i g stolenftp ftp 0 * i
Thu Mar 19 15:30:13 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g stolenftp ftp 0 * c
Thu Mar 19 15:30:53 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/test.php a _ i g stolenftp ftp 0 * i
Thu Mar 19 15:31:48 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g stolenftp ftp 0 * c
Thu Mar 19 15:31:55 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i g stolenftp ftp 0 * i
Thu Mar 19 15:36:21 2015 1 ::ffff:78.47.143.141 667 /forum/styles/prosilver/theme/stylesheet.css a _ o g stolenftp ftp 0 * c
Thu Mar 19 15:36:26 2015 1 ::ffff:78.47.143.141 0 /forum/styles/prosilver/theme/stylesheet.css a _ i g stolenftp ftp 0 * i
Thu Mar 19 16:12:34 2015 1 ::ffff:78.47.143.141 2005 /forum/install_forum_goal.php a _ o g stolenftp ftp 0 * c
Thu Mar 19 16:12:45 2015 1 ::ffff:78.47.143.141 0 /forum/install_forum_goal.php a _ i g stolenftp ftp 0 * i

最佳答案

该目录必须为777。确保还设置了umask。我强烈建议您不要以root用户身份运行vsftpd,而应以非特权用户身份运行它。

10-01 11:32