linux - Linux上的串行通讯连接

我有一个RedBee RFID Reader。它的用户文档仅适用于Windows，而我使用的是ArchLinux。我唯一一次通过USB端口进行串行通信是通过Arduino，而且是通过其GUI环境进行的，因此我从未接触过金属。因此，我有了这个RFID阅读器，您可以通过USB端口上的串行通信与之连接。波特率是9600，设备已连接到/dev/bus/usb/004/004。 ls -l /dev/bus/usb/004/004的输出为:

crwxrwxrwx 1 root root 189, 387 Mar  8 19:14 /dev/bus/usb/004/004

lsusb的输出是

Bus 004 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-
Serial (UART) IC
Bus 004 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
...

lsusb -s 004:004 -v的输出为:

Bus 004 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6001 FT232 USB-Serial (UART) IC
  bcdDevice            6.00
  iManufacturer           1 FTDI
  iProduct                2 FT232R USB UART
  iSerial                 3 A900DGX9
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               90mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 FT232R USB UART
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

这是dmsg | grep -i tty的输出

[    0.000000] console [tty0] enabled
[    7.226118] systemd[1]: Starting system-getty.slice.
[    7.226397] systemd[1]: Created slice system-getty.slice.
[   10.535204] usb 4-1.7: FTDI USB Serial Device converter now attached to ttyUSB0
[ 6372.435916] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 7961.660760] usb 4-1.7: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7964.716225] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 8282.582961] usb 4-1.7: FTDI USB Serial Device converter now attached to ttyUSB0

我尝试过的事情:

我尝试使用腻子(为Linux编译)的串行选项连接到/dev/bus/usb/004/004，但它的响应为:

Unable to open connection to:
Unable to configure serial port

最佳答案

解决方案是使用dmesg | grep -i tty获取设备已连接的TTY。就我而言，我需要连接到/dev/ttyUSB0而不是/dev/bus/usb/004/004。

更多信息

dmesg