[root@host-10-10-18-195 frr-stable-7.3]# vtysh Hello, this is FRRouting (version 7.3-MyOwnFRRVersion). Copyright 1996-2005 Kunihiro Ishiguro, et al. host-10-10-18-195# configure terminal host-10-10-18-195(config)# router bgp 195 host-10-10-18-195(config-router)# bgp router-id 10.10.18.195 host-10-10-18-195(config-router)# bgp bestpath as-path multipath-relax host-10-10-18-195(config-router)# neighbor fabric peer-group host-10-10-18-195(config-router)# neighbor fabric remote-as external host-10-10-18-195(config-router)# neighbor 10.10.16.81 peer-group fabric host-10-10-18-195(config-router)# neighbor 10.10.16.82 peer-group fabric host-10-10-18-195(config-router)# address-family l2vpn evpn host-10-10-18-195(config-router-af)# neighbor fabric activate host-10-10-18-195(config-router-af)# exit-address-family host-10-10-18-195(config-router)# ! host-10-10-18-195(config-router)# ! host-10-10-18-195(config-router)# show bgp l2vpn evpn % Unknown command: show bgp l2vpn evpn host-10-10-18-195(config-router)# exit host-10-10-18-195(config)# show bgp l2vpn evpn % Unknown command: show bgp l2vpn evpn host-10-10-18-195(config)# exit host-10-10-18-195# show bgp l2vpn evpn No prefixes displayed, 0 exist host-10-10-18-195# write Note: this version of vtysh never writes vtysh.conf Building Configuration... Configuration saved to /etc/frr/zebra.conf Configuration saved to /etc/frr/bgpd.conf Configuration saved to /etc/frr/staticd.conf host-10-10-18-195# show bgp l2vpn evpn No prefixes displayed, 0 exist host-10-10-18-195#