我尝试将文件夹与boot2docker Vagrant框同步(在Windows 8.1上):
Vagrantfile
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|
config.vm.hostname = "docker-host"
config.vm.box = "hashicorp/boot2docker"
config.vm.synced_folder "./src", "/sync/src"
end
我尝试了几种同步文件夹的方法:
如果我未定义类型(如何同步)，则Vagrant使用SMB。就像我写的一样:
config.vm.synced_folder "./src", "/sync/src", type: "smb"
使用此配置，安装失败(我输入我登录的Windows帐户的凭据):
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'hashicorp/boot2docker' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Preparing SMB shared folders...
default: You will be asked for the username and password to use for the SMB
default: folders shortly. Please use the proper username/password of your
default: Windows account.
default:
default: Username: My Username
default: Password (will be hidden):
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
==> default: Forwarding ports...
default: 2375 (guest) => 2375 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: docker
default: SSH auth method: password
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Remote connection disconnect. Retrying...
==> default: Machine booted and ready!
GuestAdditions versions on your host (5.0.20) and guest (4.3.28 r100309) do not match.
The guest's platform ("tinycore") is currently not supported, will try generic Linux method...
Copy iso file C:\Program Files/Oracle/VirtualBox/VBoxGuestAdditions.iso into the box /tmp/VBoxGuestAdditions.iso
Installing Virtualbox Guest Additions 5.0.20 - guest version is 4.3.28 r100309
mkdir: can't create directory '/tmp/selfgz99220132': No such file or directory
Cannot create target directory /tmp/selfgz99220132
You should try option --target OtherDirectory
An error occurred during installation of VirtualBox Guest Additions 5.0.20. Some functionality may not work as intended.
In most cases it is OK that the "Window System drivers" installation failed.
==> default: Setting hostname...
==> default: Mounting SMB shared folders...
default: C:/my-project/src => /sync/src
Failed to mount folders in Linux guest. This is usually because
the "vboxsf" file system is not available. Please verify that
the guest additions are properly installed in the guest and
can work properly. The command attempted was:
mount -t cifs -o uid=`id -u docker`,gid=`getent group docker | cut -d: -f3`,sec=ntlm,credentials=/etc/smb_creds_d1d75b0a1810a196107486250f8d20f4 //169.254.152.12/d1d75b0a1810a196107486250f8d20f4 /sync/src
mount -t cifs -o uid=`id -u docker`,gid=`id -g docker`,sec=ntlm,credentials=/etc/smb_creds_d1d75b0a1810a196107486250f8d20f4 //169.254.152.12/d1d75b0a1810a196107486250f8d20f4 /sync/src
The error output from the last command was:
mount: mounting //169.254.152.12/d1d75b0a1810a196107486250f8d20f4 on /sync/src failed: Invalid argument
==> default: The previous process exited with exit code 1.
如果我用
config.vm.synced_folder "./src", "/sync/src", type: "nfs"
相反，Vagrant仍使用SMB(与以前相同的输出)。如果我用
config.vm.synced_folder "./src", "/sync/src", type: "virtualbox"
我懂了
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'hashicorp/boot2docker' is up to date...
==> default: Clearing any previously set forwarded ports...
The synced folder type 'virtualbox' is reporting as unusable for
your current setup. Please verify you have all the proper
prerequisites for using this shared folder type and try again.
如果我用
config.vm.synced_folder "./src", "/sync/src", type: "rsync"
安装了vagrant-gatling-rsync插件
vagrant plugin install vagrant-gatling-rsync
并在Cygwin中运行(Cmd没有rsync)，我得到以下信息:
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'hashicorp/boot2docker' is up to date...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
==> default: Forwarding ports...
default: 2375 (guest) => 2375 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: docker
default: SSH auth method: password
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Remote connection disconnect. Retrying...
==> default: Machine booted and ready!
GuestAdditions versions on your host (5.0.20) and guest (4.3.28 r100309) do not match.
The guest's platform ("tinycore") is currently not supported, will try generic Linux method...
Copy iso file C:\Program Files/Oracle/VirtualBox/VBoxGuestAdditions.iso into the box /tmp/VBoxGuestAdditions.iso
Installing Virtualbox Guest Additions 5.0.20 - guest version is 4.3.28 r100309
mkdir: can't create directory '/tmp/selfgz95812741': No such file or directory
Cannot create target directory /tmp/selfgz95812741
You should try option --target OtherDirectory
An error occurred during installation of VirtualBox Guest Additions 5.0.20. Some functionality may not work as intended.
In most cases it is OK that the "Window System drivers" installation failed.
==> default: Setting hostname...
==> default: Installing rsync to the VM...
==> default: The machine you're rsyncing folders to is configured to use
==> default: password-based authentication. Vagrant can't script rsync to automatically
==> default: enter this password, so you'll likely be prompted for a password
==> default: shortly.
==> default:
==> default: If you don't want to have to do this, please enable automatic
==> default: key insertion using `config.ssh.insert_key`.
==> default: Rsyncing folder: /cygdrive/c/my-project/src/ => /sync/src
There was an error when attempting to rsync a synced folder.
Please inspect the error message below for more info.
Host path: /cygdrive/c/my-project/src/
Guest path: /sync/src
Command: rsync --verbose --archive --delete -z --copy-links --chmod=ugo=rwX --no-perms --no-owner --no-group --rsync-path sudo rsync -e ssh -p 2222 -o ControlMaster=auto -o ControlPath=C:/cygwin64/tmp/ssh.640 -o ControlPersist=10m -o StrictHostKeyChecking=no -o IdentitiesOnly=true -o UserKnownHostsFile=/dev/null --exclude .vagrant/ /cygdrive/c/my-project/src/ [email protected]:/sync/src
Error: Warning: Permanently added '[127.0.0.1]:2222' (ECDSA) to the list of known hosts.
Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,password,keyboard-interactive).
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [sender=3.1.1]
==> default: The previous process exited with exit code 1.
除此之外，我尝试了另一个boot2docker盒子
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|
config.vm.hostname = "docker-host"
config.vm.box = "dduportal/boot2docker"
config.vm.synced_folder "./src", "/sync/src"
end
导致
$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Checking if box 'dduportal/boot2docker' is up to date...
==> default: Clearing any previously set forwarded ports...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 2375 (guest) => 2375 (host) (adapter 1)
default: 2376 (guest) => 2376 (host) (adapter 1)
default: 22 (guest) => 2222 (host) (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: docker
default: SSH auth method: private key
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Remote connection disconnect. Retrying...
default: Warning: Authentication failure. Retrying...
default: Warning: Authentication failure. Retrying...
default: Warning: Authentication failure. Retrying...
default: Warning: Authentication failure. Retrying...
default: Warning: Authentication failure. Retrying...
==> default: Waiting for cleanup before exiting...
Vagrant exited after cleanup due to external interrupt.
如何使文件夹同步化与Vagrant和boot2docker一起运行？
最佳答案
我在Windows上使用 dduportal / boot2docker 的工作设置如下所示:
# -*- mode: ruby -*-
# vi: set ft=ruby :
Vagrant.configure(2) do |config|
config.vm.hostname = "docker-host"
config.vm.box = "dduportal/boot2docker"
config.vm.provision "docker"
config.vm.synced_folder ".", "/vagrant", type: "virtualbox"
end
关于docker - Vagrant:在Windows上与boot2docker框同步文件夹，我们在Stack Overflow上找到一个类似的问题：https://stackoverflow.com/questions/37239857/