python - 连接到设备时更改 pySerial 中的波特率？

我正在尝试为名为 uLCD32-pt 的 LCD 设备编写脚本，问题是您需要以 9600 的波特率连接到它，为了获得更高的波特率，您必须连接到它，发送更改波特率命令，然后以新设置的波特率发送新命令。我的液晶显示器在绘制像素时变得非常慢，我知道这是因为波特率，所以在连接到设备后有什么方法可以改变波特率吗？到目前为止，这是我的代码？

import serial
import time

#Connect to uLCD32-pt with autobaud
ser = serial.Serial(
    port='/dev/ttyUSB0',
    baudrate=9600,
    timeout=1,
    parity=serial.PARITY_NONE,
    stopbits=serial.STOPBITS_ONE,
    bytesize=serial.EIGHTBITS
)
ser.write("U")


while(True):
    #15 x white pixels
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0001)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#1
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0002)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#2
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0003)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#3
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0004)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#4
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0005)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#5
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0006)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#6
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0007)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#7
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0008)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#8
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0009)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#9
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x000A)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#10
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x000B)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#11
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x000C)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#12
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x000D)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#13
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x000E)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#14
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x000F)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#15
    ser.write(chr(0x0050)+chr(0x0000)+chr(0x0010)+chr(0x0000)+chr(0x000A)+chr(0x00FF)+chr(0x00FF))#16

最佳答案

在 documentation 中，波特率属性的描述说:



所以我希望这条线可以工作:

ser.baudrate = 115200

关于python - 连接到设备时更改 pySerial 中的波特率？，我们在Stack Overflow上找到一个类似的问题：https://stackoverflow.com/questions/9271777/