c - 在Ubuntu中使用gcc生成特定频率的声音？

如何在C/C++中生成特定频率的声音。我运行Ubuntu 10.04并使用gcc。 Windows的TurboC上有一个void sound(int frequency)函数。是否有gcc的等效项？

最佳答案

以下是利用PortAudio库生成给定频率的方波的代码。
在Linux上，使用gcc buzzer.c -o buzzer -lportaudio进行编译。对于Windows也应该编译良好。我不知道sound(int frequency)的行为如何，但是下面应该可以模拟老式蜂鸣器的用法。您可能需要一个portaudio-devel(或与Ubuntu，portaudio-dev等效)？对于Pulse Audio，您的存储库中可能需要一些较新的PortAudio版本。编译不是问题。您可以按照WTFPL许可条款使用以下代码。 :-)(它是从PortAudio示例派生的)

#include <stdio.h>
#include <math.h>
#include "portaudio.h"
#include <stdint.h>
#include <unistd.h> // for usleep()

#define SAMPLE_RATE   (44100)
#define FRAMES_PER_BUFFER  (64)

typedef struct
{
    uint32_t total_count;
    uint32_t up_count;

    uint32_t counter;
    uint32_t prev_freq;
    uint32_t freq;
} paTestData;

//volatile int freq = 0;

/* This routine will be called by the PortAudio engine when audio is needed.
** It may called at interrupt level on some machines so don't do anything
** that could mess up the system like calling malloc() or free().
*/
static int patestCallback( const void *inputBuffer, void *outputBuffer,
                           unsigned long framesPerBuffer,
                           const PaStreamCallbackTimeInfo* timeInfo,
                           PaStreamCallbackFlags statusFlags,
                           void *userData )
{
    paTestData *data = (paTestData*)userData;
    uint8_t *out = (uint8_t*)outputBuffer;
    unsigned long i;
    uint32_t freq = data->freq;

    (void) timeInfo; /* Prevent unused variable warnings. */
    (void) statusFlags;
    (void) inputBuffer;

    for( i=0; i<framesPerBuffer; i++ )
    {
        if(data->up_count > 0 && data->total_count == data->up_count) {
            *out++ = 0x00;
            continue;
        }
        data->total_count++;

        if(freq != data->prev_freq) {
            data->counter = 0;
        }

        if(freq) {
            int overflow_max = SAMPLE_RATE / freq;
            uint32_t data_cnt = data->counter % overflow_max;
            if(data_cnt > overflow_max/2)
                *out++ = 0xff;
            else {
                *out++ = 0x00;
            }
            data->counter++;
        }
        else {
            data->counter = 0;
            *out++ = 0;
        }
        data->prev_freq = freq;
    }

    return paContinue;
}

static PaStream *stream;
static paTestData data;


void buzzer_set_freq(int frequency)
{
    data.up_count = 0; // do not stop!
    data.freq = frequency;
}

void buzzer_beep(int frequency, int msecs)
{
    data.total_count = 0;
    data.up_count = SAMPLE_RATE * msecs / 1000;
    data.freq = frequency;
}

int buzzer_start(void)
{
    PaStreamParameters outputParameters;

    PaError err;
    int i;

    err = Pa_Initialize();
    if( err != paNoError ) goto error;

    outputParameters.device = Pa_GetDefaultOutputDevice(); /* default output device */
    outputParameters.channelCount = 1;       /* stereo output */
    outputParameters.sampleFormat = paUInt8; /* 32 bit floating point output */
    outputParameters.suggestedLatency = Pa_GetDeviceInfo( outputParameters.device )->defaultLowOutputLatency;
    outputParameters.hostApiSpecificStreamInfo = NULL;

    err = Pa_OpenStream(
        &stream,
        NULL, /* no input */
        &outputParameters,
        SAMPLE_RATE,
        FRAMES_PER_BUFFER,
        paClipOff,      /* we won't output out of range samples so don't bother clipping them */
        patestCallback,
        &data );
    if( err != paNoError ) goto error;

    err = Pa_StartStream( stream );
    if( err != paNoError ) goto error;

    return err;
error:
    Pa_Terminate();
    fprintf( stderr, "An error occured while using the portaudio stream\n" );
    fprintf( stderr, "Error number: %d\n", err );
    fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
    return err;

}

int buzzer_stop()
{
    PaError err = 0;
    err = Pa_StopStream( stream );
    if( err != paNoError ) goto error;

    err = Pa_CloseStream( stream );
    if( err != paNoError ) goto error;

    Pa_Terminate();

    return err;
error:
    Pa_Terminate();
    fprintf( stderr, "An error occured while using the portaudio stream\n" );
    fprintf( stderr, "Error number: %d\n", err );
    fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
    return err;
}
void msleep(int d){
    usleep(d*1000);
}
int main(void)
{

    // notes frequency chart: http://www.phy.mtu.edu/~suits/notefreqs.html

    buzzer_start();
    buzzer_set_freq(261);
    msleep(250);
    buzzer_set_freq(293);
    msleep(250);
    buzzer_set_freq(329);
    msleep(250);
    buzzer_set_freq(349);
    msleep(250);
    buzzer_set_freq(392);
    msleep(250);
    buzzer_set_freq(440);
    msleep(250);
    buzzer_set_freq(494);
    msleep(250);
    buzzer_beep(523, 200);
    msleep(250);

    buzzer_stop();

    return 0;
}

关于c - 在Ubuntu中使用gcc生成特定频率的声音？，我们在Stack Overflow上找到一个类似的问题：https://stackoverflow.com/questions/7678470/