view命令主要用于显示program information, path information, LU information, HBA port information, CHA port
information, and corresponding information about an HDLM device, sd or ssd device, and LDEV.
1. 显示HDLM程序信息
命令格式
dlnkmgr view -sys [ -sfunc | -msrv | -adrv | -pdrv | -lic | -audlog | -lbpathusetimes | -expathusetimes ] [-t] -t: 不显示标题
程序信息表-sfunc (HDLM功能设置)
| Item | Description |
| HDLM Version | HDLM版本号 |
| Service Pack Version | Service Pack版本号, 空表示没Service Pack |
| Load Balance | 状态： on - Enabled; off - Disabled 算法： rr - Round Robin; extended rr - Extended Round Robin; lio - Least I/Os; extended lio - Extended Least I/Os; lbk - Least Blocks; extended lbk - Extended Least Blocks |
| Support Cluster | Blank# |
| Elog Level | 0 - Collects no error information; 1 - Collects error information at the Error level or higher; 2 - Collects error information at the Warning level or higher; 3 - Collects error information at the Information or higher; 4 - Collects error information at the Information level or higher (including maintenance information). |
| Elog File Size (KB) | Error log 文件大小 (KB) |
| Number Of Elog Files | Error log文件个数 |
| Trace Level | 0 - Does not output any trace; 1 - Only outputs error information; 2 - Outputs a summary of program operation; 3 - Outputs details of program operation; 4 - Outputs all information |
| Trace File Size (KB) | Trace文件大小 (KB) |
| Number Of Trace Files | Trace文件个数 |
| Path Health Checking | 状态: on - Enabled; off - Disabled interval: (分钟) |
| Auto Failback | 状态: on - Enabled; off - Disabled check interval: (分钟) |
| Intermittent Error Monitor | 状态: on - Enabled; off - Disabled Auto Failback - off => Intermittent Error Monitor - disabled (但状态可能显示为on) Auto Failback - on => Intermittent Error Monitor - enabled number-of-timeserror-is-to-occur/monitoring-interval (分钟) |
示例
-bash-3.2# dlnkmgr view -sys -sfunc
HDLM Version : 7.3.1
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size (KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 15:05:56
程序信息表-msrv (HDLM manager信息)
| Item | Description |
| HDLM Manager | 状态: Alive - 正常; Dead - 停止 |
| Ver | 版本 |
| WakeupTime | 启动时间 |
示例
-bash-3.2# dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive 7.3.1-00 2014/04/10 11:07:33
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 15:51:01
程序信息表-adrv (HDLM alert driver信息)
| Item | Description |
| HDLM Alert Driver | 状态: Alive - 正常; Dead - 停止 |
| Ver | 版本 |
| WakeupTime | 启动时间 |
| ElogMem Size | Error log memory大小 (KB) |
示例
-bash-3.2# dlnkmgr view -sys -adrv
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive 7.3.1-00 2014/04/10 11:07:00 4096
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 15:54:48
程序信息表-pdrv (HDLM driver信息)
| Item | Description |
| HDLM Driver | 状态: Alive - 正常; Dead - 停止 |
| Ver | 版本 |
| WakeupTime | 启动时间 |
示例
-bash-3.2# dlnkmgr view -sys -pdrv
HDLM Driver Ver WakeupTime
Alive 7.3.1-00 2014/04/10 11:07:00
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 15:57:22
程序信息表-lic (HDLM license信息)
| Item | Description |
| License Type | 状态: Permanent; Temporary; Emergency |
| Expiration | 过期时间 |
示例
-bash-3.2# dlnkmgr view -sys -lic
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 15:58:34
程序信息表-audlog (HDLM审计配置信息)
| Item | Description |
| Audit Log | 状态: on - Enabled; off - Disabled 级别: 0 - 7 |
| Audit Log Category | 类别: ss – StartStop; a – Authentication; ca – ConfigurationAccess; all - 上述所有 |
| Audit Log Facility | The name of the audit log facility is displayed. user, local0, local1, local2, local3, local4, local5,local6, or local7 is displayed. |
示例
-bash-3.2# dlnkmgr view -sys -audlog
Audit Log : off
Audit Log Category : -
Audit Log Facility : -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:01:40
2. 显示path信息
命令格式 (三种)
不选择显示列 (显示所有列)
dlnkmgr view -path [ -hdev HostDeviceName ] [-stname] [-iem]
[-srt {pn | lu | cp}] [-hbaportwwn] [-t] 使用-item选择显示列
dlnkmgr view -path
-item [pn] [dn] [lu] [cp] [type] [ic] [ie] [dnu]
[hd] [iep] [hbaportwwn]
[ -hdev HostDeviceName ] [-stname] [-srt {pn | lu | cp}] [-t] 显示汇总信息
dlnkmgr view -path -c [-stname] [-srt {lu | cp}] [-t]
参数表
| Item | Description |
| -hdev HostDeviceName | 只显示指定设备的路径信息，以cXtYdZ方式指定 |
| -stname | 在DskName列中显示存储的model ID |
| -srt {pn|lu|cp} | 指定排序键. pn - Path name; lu - LUN; cp - Port number of the CHA 规则: first sorting key->DskName; second sorting key-> -srt参数; third sorting key->AutoPATH_ID |
| -iem | 显示intermittent errors |
| -hbaportwwn | 显示hba卡port wwn |
| -t | 不显示标题 |
ITEM对照表
| Item | Abbr |
| PathID# | NONE |
| PathName | pn |
| HBAPortWWN | hbaportwwn |
| DskName | dn |
| iLU | lu |
| ChaPort | cp |
| Status# | NONE |
| Type | type |
| IO-Count | ic |
| IO-Errors | ie |
| DNum | dnu |
| HDevName | hd |
| IEP | iep |
示例
显示所有路径信息
-bash-3.2# dlnkmgr view -path -stname -iem -hbaportwwn
Paths:000002 OnlinePaths:000002
PathStatus IO-Count IO-Errors
Online 14242 0 PathID PathName HBAPortWWN DskName iLU ChaPort Status Type IO-Count IO-Errors DNum HDevName IEP
000000 0000.0000.0000000000020100.0000 210000E08B9CA09F HITACHI .AMS .75040975 0049 0A Online Own 14242 0 - c4t50060E80102A00F0d0 -
000001 0001.0000.0000000000020100.0000 210000E08B9CA977 HITACHI .AMS .75040975 0049 1A Online Non 0 0 - c4t50060E80102A00F0d0 -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:31:00 显示指定设备路径信息
-bash-3.2# dlnkmgr view -path -hdev c4t50060E80102A00F0d0
Paths:000002 OnlinePaths:000002
PathStatus IO-Count IO-Errors
Online 14374 0 PathID PathName DskName iLU ChaPort Status Type IO-Count IO-Errors DNum HDevName
000000 0000.0000.0000000000020100.0000 HITACHI .DF600F .75040975 0049 0A Online Own 14374 0 - c4t50060E80102A00F0d0
000001 0001.0000.0000000000020100.0000 HITACHI .DF600F .75040975 0049 1A Online Non 0 0 - c4t50060E80102A00F0d0
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:32:34 显示指定item信息
-bash-3.2# dlnkmgr view -path -item pn dn lu hd hbaportwwn -stname
Paths:000002 OnlinePaths:000002
PathStatus IO-Count IO-Errors
Online 14784 0 PathID PathName HBAPortWWN DskName iLU Status HDevName
000000 0000.0000.0000000000020100.0000 210000E08B9CA09F HITACHI .AMS .75040975 0049 Online c4t50060E80102A00F0d0
000001 0001.0000.0000000000020100.0000 210000E08B9CA977 HITACHI .AMS .75040975 0049 Online c4t50060E80102A00F0d0
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:36:37 显示概要信息
-bash-3.2# dlnkmgr view -path -c -stname
Paths:000002 OnlinePaths:000002
PathStatus IO-Count IO-Errors
Online 14884 0 PathID DskName iLU CP Status Type
000000 HITACHI .AMS .75040975 0049 0A Online Own
000001 HITACHI .AMS .75040975 0049 1A Online Non
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:37:35
3. 显示LUN信息
命令格式 (四种)
显示基本信息
dlnkmgr view -lu [ -hdev HostDeviceName | -pathid AutoPATH_ID ] [-t] 显示指定列信息
dlnkmgr view -lu
-item [ [slpr] [pn] [cp] [clpr] [type]
[ic] [ie] [dnu] [iep] [pd] [dpc] | all ]
[ -hdev HostDeviceName | -pathid AutoPATH_ID ] [-t] 显示概要信息
dlnkmgr view -lu -c [-t] 显示概要信息, 多个slpr分区信息
dlnkmgr view -lu -c -item [slpr] [-t]
参数表
| Item | Description |
| -hdev HostDeviceName | 只显示指定设备信息，以cXtYdZ方式指定 |
| -pathid AutoPATH_ID | 只显示指定pathid的设备信息 (dlnkmgr view -path包括pathid信息) |
| -t | 不显示标题 |
ITEM对照表
| Item | Abbr |
| SLPR | slpr |
| PathName | pn |
| ChaPort | cp |
| CLPR | clpr |
| Type | type |
| IO-Count | ic |
| IO-Errors | ie |
| DNum | dnu |
| IEP | iep |
| Physical Device | pd |
| all items are displayed | all |
示例
显示lun信息
-bash-3.2# dlnkmgr view -lu
Product : AMS
SerialNumber : 75040975
LUs : 1 iLU HDevName Device PathID Status
0049 c4t50060E80102A00F0d0 ssd0 000000 Online
ssd1 000001 Online
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:58:38 显示所有item
-bash-3.2# dlnkmgr view -lu -item all
Product : AMS
SerialNumber : 75040975
LUs : 1 iLU SLPR HDevName Device PathID PathName ChaPort CLPR Status Type IO-Count IO-Errors DNum IEP Physical Device
0049 - c4t50060E80102A00F0d0 ssd0 000000 0000.0000.0000000000020100.0000 0A 0 Online Own 17005 0 - - /devices/pci@0/pci@0/pci@8/pci@0/pci@1/QLGC,qlc@0/fp@0,0/ssd@w50060e80102a00f0,0
ssd1 000001 0001.0000.0000000000020100.0000 1A 0 Online Non 0 0 - - /devices/pci@0/pci@0/pci@9/QLGC,qlc@0/fp@0,0/ssd@w50060e80102a00f2,0
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:58:47 显示概要信息
-bash-3.2# dlnkmgr view -lu -c
Product S/N LUs iLU HDevName Paths OnlinePaths
AMS 75040975 1 0049 c4t50060E80102A00F0d0 2 2
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 16:59:14 显示概要信息及slpr
-bash-3.2# dlnkmgr view -lu -c -item slpr
Product S/N LUs iLU SLPR HDevName Paths OnlinePaths
AMS 75040975 1 0049 - c4t50060E80102A00F0d0 2 2
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 17:00:16
4. 显示device信息
命令格式
dlnkmgr view -drv [-t]
示例
-bash-3.2# dlnkmgr view -drv
PathID HDevName Device LDEV
000000 c4t50060E80102A00F0d0 ssd0 AMS.75040975.0049
000001 c4t50060E80102A00F0d0 ssd1 AMS.75040975.0049
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 17:11:53
5. 显示HBA卡信息
命令格式
dlnkmgr view -hba [-srt pb] [-c | -portwwn] [-t]
示例
显示hba信息
-bash-3.2# dlnkmgr view -hba
HbaID Port.Bus IO-Count IO-Errors Paths OnlinePaths Physical Device
00000 0000.0000 20398 0 1 1 /devices/pci@0/pci@0/pci@8/pci@0/pci@1/QLGC,qlc@0/fp@0,0/ssd@w50060e80102a00f0,0
00001 0001.0000 0 0 1 1 /devices/pci@0/pci@0/pci@9/QLGC,qlc@0/fp@0,0/ssd@w50060e80102a00f2,0
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 17:12:31 显示概要信息
-bash-3.2# dlnkmgr view -hba -c
HbaID Port.Bus IO-Count IO-Errors Paths OnlinePaths
00000 0000.0000 20402 0 1 1
00001 0001.0000 0 0 1 1
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 17:12:36 显示wwn号
-bash-3.2# dlnkmgr view -hba -portwwn
HbaID Port.Bus HBAPortWWN IO-Count IO-Errors Paths OnlinePaths Physical Device
00000 0000.0000 210000E08B9CA09F 20418 0 1 1 /devices/pci@0/pci@0/pci@8/pci@0/pci@1/QLGC,qlc@0/fp@0,0/ssd@w50060e80102a00f0,0
00001 0001.0000 210000E08B9CA977 0 0 1 1 /devices/pci@0/pci@0/pci@9/QLGC,qlc@0/fp@0,0/ssd@w50060e80102a00f2,0
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 17:12:48
6. 显示存储端口信息
命令格式
dlnkmgr view -cha [-srt cp] [-t]
示例
-bash-3.2# dlnkmgr view -cha
ChaID Product SerialNumber ChaPort IO-Count IO-Errors Paths OnlinePaths
00000 AMS 75040975 0A 20380 0 1 1
00001 AMS 75040975 1A 0 0 1 1
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = 2014/04/10 17:12:20