1、安装libusb-dev
sudo apt-get install libusb-dev
2、dnw2编译配置
源码如下，将其保存为dnw2.c
编译命令 gcc dnw2.c -o dnw2 -lusb。
不同的硬件平台，修改以下三项：
QQ2440_SECBULK_IDVENDOR，QQ2440_SECBULK_IDPRODUCT，*((u_int32_t*)write_buf) = 0x30800000; //download address
/* dnw2 linux main file. This depends on libusb.
*
* Author: Fox <[email protected]>
* License: GPL
*
*/ #include <stdio.h>
#include <usb.h>
#include <errno.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h> #define QQ2440_SECBULK_IDVENDOR 0x5345
#define QQ2440_SECBULK_IDPRODUCT 0x1234 struct usb_dev_handle * open_port()
{
struct usb_bus *busses, *bus; usb_init();
usb_find_busses();
usb_find_devices(); busses = usb_get_busses();
for(bus=busses;bus;bus=bus->next)
{
struct usb_device *dev;
for(dev=bus->devices;dev;dev=dev->next)
{
printf("idVendor:0x%x\t,ipProduct:0x%x\n",dev->descriptor.idVendor,dev->descriptor.idProduct);
if( QQ2440_SECBULK_IDVENDOR==dev->descriptor.idVendor
&& QQ2440_SECBULK_IDPRODUCT==dev->descriptor.idProduct)
{
printf("Target usb device found!\n");
struct usb_dev_handle *hdev = usb_open(dev);
if(!hdev)
{
perror("Cannot open device");
}
else
{
if(0!=usb_claim_interface(hdev, 0))
{
perror("Cannot claim interface");
usb_close(hdev);
hdev = NULL;
}
}
return hdev;
}
}
} printf("Target usb device not found!\n"); return NULL;
} void usage()
{
printf("Usage: dnw2 <file>\n\n");
} unsigned char* prepare_write_buf(char *filename, unsigned int *len)
{
unsigned char *write_buf = NULL;
struct stat fs; int fd = open(filename, O_RDONLY);
if(-1==fd)
{
perror("Cannot open file");
return NULL;
}
if(-1==fstat(fd, &fs))
{
perror("Cannot get file size");
goto error;
}
write_buf = (unsigned char*)malloc(fs.st_size+10);
if(NULL==write_buf)
{
perror("malloc failed");
goto error;
} if(fs.st_size != read(fd, write_buf+8, fs.st_size))
{
perror("Reading file failed");
goto error;
} printf("Filename : %s\n", filename);
printf("Filesize : %d bytes\n", fs.st_size); *((u_int32_t*)write_buf) = 0x30800000; //download address
//*((u_int32_t*)write_buf) = 0x30000000; //download address
*((u_int32_t*)write_buf+1) = fs.st_size + 10; //download size; *len = fs.st_size + 10;
return write_buf; error:
if(fd!=-1) close(fd);
if(NULL!=write_buf) free(write_buf);
fs.st_size = 0;
return NULL; } int main(int argc, char *argv[])
{
if(2!=argc)
{
usage();
return 1;
} struct usb_dev_handle *hdev = open_port();
if(!hdev)
{
return 1;
} unsigned int len = 0;
unsigned char* write_buf = prepare_write_buf(argv[1], &len);
if(NULL==write_buf) return 1; unsigned int remain = len;
unsigned int towrite;
printf("Writing data ...\n");
while(remain)
{
towrite = remain>512 ? 512 : remain;
if(towrite != usb_bulk_write(hdev, 0x03, write_buf+(len-remain), towrite, 3000))
{
perror("usb_bulk_write failed");
break;
}
remain-=towrite;
printf("\r%d%\t %d bytes ", (len-remain)*100/len, len-remain);
fflush(stdout);
}
if(0==remain) printf("Done!\n");
return 0;
}