专题：Linux内存管理专题
关键词：KSM、匿名页面、COW、madvise 、MERGEABLE、UNMERGEABLE。
KSM是Kernel Samepage Merging的意思，用于合并内容相同的页面。
在虚拟化环境中，同一台主机上存在许多相同OS和应用程序，很多页面内容可能是完全相同的，因此可以被合并，从而释放内存供其它应用程序使用。
KSM允许合并同一个进程或不同进程之间内容相同的匿名页面，这对应用程序是不可见的。
把这些相同的页面很成一个只读页面，从而释放物理页面，当应用程序需要改变页面内容时，发生写时复制(Copy-On-Write)。
1. KSM的实现
KSM核心设计思想是基于写时复制机制COW，也就是将内容相同的页面合并成一个只读页面，从而释放出空闲物理页面。
KSM的实现可以分为两部分：一是启动内核线程ksmd，等待唤醒进行页面扫描和合并；二是madvise唤醒内核线程ksmd。
KSM只会处理通过madvise系统调用显式指定的用户进程地址空间内存，因此用户想使用此功能必须显式调用madvise(addr, length, MADV_MERGEABLE)。
用户想取消KSM中某个用户进程地址空间合并功能，也需要显式调用madvise(addr, length, MADV_UNMERGEABLE)。
欠一张KSM实现流程图。
KSM会合并什么样类型的页面？
如何去查找和比较两个相同的页面？
如何节省内存？
1.1 使能KSM功能
很多内核默认没有开启KSM功能，需要打开CONFIG_KSM=y才能打开。
通过make menuconfig配置如下：
Processor type and features
[*]Enable KSM for page merging
1.2 KSM相关数据结构
KSM的核心数据结构有三个：struct rmap_item、struct mm_slot、struct ksm_scan。
欠一张三者之间的关系图。
rmap_item描述一个虚拟地址反向映射的条目。
/**
* struct rmap_item - reverse mapping item for virtual addresses
* @rmap_list: next rmap_item in mm_slot's singly-linked rmap_list
* @anon_vma: pointer to anon_vma for this mm,address, when in stable tree
* @nid: NUMA node id of unstable tree in which linked (may not match page)
* @mm: the memory structure this rmap_item is pointing into
* @address: the virtual address this rmap_item tracks (+ flags in low bits)
* @oldchecksum: previous checksum of the page at that virtual address
* @node: rb node of this rmap_item in the unstable tree
* @head: pointer to stable_node heading this list in the stable tree
* @hlist: link into hlist of rmap_items hanging off that stable_node
*/
struct rmap_item {
struct rmap_item *rmap_list;-----------------------------------------所有rmap_item连接成一个链表，链表头在ksm_scam.rmap_list中。
union {
struct anon_vma *anon_vma; /* when stable */------------------当rmap_item加入stable树时，指向VMA的anon_vma数据结构。
#ifdef CONFIG_NUMA
int nid; /* when node of unstable tree */
#endif
};
struct mm_struct *mm;------------------------------------------------进程的struct mm_struct数据结构
unsigned long address; /* + low bits used for flags below */--rmap_item所跟踪的用户地址空间
unsigned int oldchecksum; /* when unstable */---------------------虚拟地址对应的物理页面的旧校验值
union {
struct rb_node node; /* when node of unstable tree */---------rmap_item加入unstable红黑树的节点
struct { /* when listed from stable tree */
struct stable_node *head;------------------------------------加入stable红黑树的节点
struct hlist_node hlist;-------------------------------------stable链表
};
};
};
mm_slot描述添加到KSM系统中将来要被扫描的进程mm_struct数据结构。
/*
* A few notes about the KSM scanning process,
* to make it easier to understand the data structures below:
*
* In order to reduce excessive scanning, KSM sorts the memory pages by their
* contents into a data structure that holds pointers to the pages' locations.
*
* Since the contents of the pages may change at any moment, KSM cannot just
* insert the pages into a normal sorted tree and expect it to find anything.
* Therefore KSM uses two data structures - the stable and the unstable tree.
*
* The stable tree holds pointers to all the merged pages (ksm pages), sorted
* by their contents. Because each such page is write-protected, searching on
* this tree is fully assured to be working (except when pages are unmapped),
* and therefore this tree is called the stable tree.
*
* In addition to the stable tree, KSM uses a second data structure called the
* unstable tree: this tree holds pointers to pages which have been found to
* be "unchanged for a period of time". The unstable tree sorts these pages
* by their contents, but since they are not write-protected, KSM cannot rely
* upon the unstable tree to work correctly - the unstable tree is liable to
* be corrupted as its contents are modified, and so it is called unstable.
*
* KSM solves this problem by several techniques:
*
* 1) The unstable tree is flushed every time KSM completes scanning all
* memory areas, and then the tree is rebuilt again from the beginning.
* 2) KSM will only insert into the unstable tree, pages whose hash value
* has not changed since the previous scan of all memory areas.
* 3) The unstable tree is a RedBlack Tree - so its balancing is based on the
* colors of the nodes and not on their contents, assuring that even when
* the tree gets "corrupted" it won't get out of balance, so scanning time
* remains the same (also, searching and inserting nodes in an rbtree uses
* the same algorithm, so we have no overhead when we flush and rebuild).
* 4) KSM never flushes the stable tree, which means that even if it were to
* take 10 attempts to find a page in the unstable tree, once it is found,
* it is secured in the stable tree. (When we scan a new page, we first
* compare it against the stable tree, and then against the unstable tree.)
*
* If the merge_across_nodes tunable is unset, then KSM maintains multiple
* stable trees and multiple unstable trees: one of each for each NUMA node.
*/ /**
* struct mm_slot - ksm information per mm that is being scanned
* @link: link to the mm_slots hash list
* @mm_list: link into the mm_slots list, rooted in ksm_mm_head
* @rmap_list: head for this mm_slot's singly-linked list of rmap_items
* @mm: the mm that this information is valid for
*/
struct mm_slot {
struct hlist_node link;------------------用于添加到mm_slot哈希表中。
struct list_head mm_list;----------------用于添加到mm_slot链表中，链表头在ksm_mm_head
struct rmap_item *rmap_list;-------------rmap_item链表头
struct mm_struct *mm;--------------------进程的mm_sturct数据结构
};
ksm_scan表示当前扫描状态。
/**
* struct ksm_scan - cursor for scanning
* @mm_slot: the current mm_slot we are scanning
* @address: the next address inside that to be scanned
* @rmap_list: link to the next rmap to be scanned in the rmap_list
* @seqnr: count of completed full scans (needed when removing unstable node)
*
* There is only the one ksm_scan instance of this cursor structure.
*/
struct ksm_scan {
struct mm_slot *mm_slot;---------------------当前正在扫描的mm_slot
unsigned long address;-----------------------下一次扫描地址
struct rmap_item **rmap_list;----------------将要扫描rmap_item的指针
unsigned long seqnr;-------------------------全部扫描完成后会计数一次，用于删除unstable节点。
};
1.3 madvise触发唤醒KSM内核线程
madvise用于给内核处理内存paging I/O建议，和KSM相关的是MADV_MERGEABLE和MADV_UNMERGEABLE。
MADV_MERGEABLE用于显式调用处理用户进程地址空间合并功能。
MADV_UNMERGEABLE用于显式调用取消一个用户进程地址空间合并功能。
madvise-------------------------------------madvise系统调用
madvise_vma
madvise_behavior
ksm_madvise---------------------处理MADV_MERGEABLE/MADV_UNMERGEABLE情况
__ksm_enter-----------------MADV_MERGEABLE，唤醒ksmd线程
unmerge_ksm_pages-----------MADV_UNMERGEABLE
__ksm_enter首先创建mm_slot，然后唤醒ksmd内核线程进行KSM处理。
int __ksm_enter(struct mm_struct *mm)
{
struct mm_slot *mm_slot;
int needs_wakeup; mm_slot = alloc_mm_slot();-----------------------------------------------分配一个mm_slot，表示当前进程mm_struct数据结构
if (!mm_slot)
return -ENOMEM; /* Check ksm_run too? Would need tighter locking */
needs_wakeup = list_empty(&ksm_mm_head.mm_list);--------------------------为空表示当前没有正在被扫描的mm_slot spin_lock(&ksm_mmlist_lock);
insert_to_mm_slots_hash(mm, mm_slot);-------------------------------------将当前进程mm赋给mm_slot->mm
/*
* When KSM_RUN_MERGE (or KSM_RUN_STOP),
* insert just behind the scanning cursor, to let the area settle
* down a little; when fork is followed by immediate exec, we don't
* want ksmd to waste time setting up and tearing down an rmap_list.
*
* But when KSM_RUN_UNMERGE, it's important to insert ahead of its
* scanning cursor, otherwise KSM pages in newly forked mms will be
* missed: then we might as well insert at the end of the list.
*/
if (ksm_run & KSM_RUN_UNMERGE)
list_add_tail(&mm_slot->mm_list, &ksm_mm_head.mm_list);
else
list_add_tail(&mm_slot->mm_list, &ksm_scan.mm_slot->mm_list);---------mm_slot添加到ksm_scan.mm_slot->mm_list链表中
spin_unlock(&ksm_mmlist_lock); set_bit(MMF_VM_MERGEABLE, &mm->flags);------------------------------------表示这个进程已经添加到KSM系统中
atomic_inc(&mm->mm_count); if (needs_wakeup)
wake_up_interruptible(&ksm_thread_wait);------------------------------如果之前为空，则唤醒ksmd内核线程。 return ;
}
1.4 内核线程ksmd
static DECLARE_WAIT_QUEUE_HEAD(ksm_thread_wait);
定义ksm_thread_wait等待队列，ksmd内核线程在此阻塞等待，madvise唤醒。
ksm_init创建ksmd内核线程，
static int __init ksm_init(void)
{
struct task_struct *ksm_thread;
int err; err = ksm_slab_init();-----------------------------------------------创建ksm_rmap_item、ksm_stable_node、ksm_mm_slot三个高速缓存。
if (err)
goto out; ksm_thread = kthread_run(ksm_scan_thread, NULL, "ksmd");------------创建ksmd内核线程，处理函数为ksm_scan_thread。
if (IS_ERR(ksm_thread)) {
pr_err("ksm: creating kthread failed\n");
err = PTR_ERR(ksm_thread);
goto out_free;
} #ifdef CONFIG_SYSFS
err = sysfs_create_group(mm_kobj, &ksm_attr_group);-----------------在sys/kernel/mm下创建ksm相关节点
if (err) {
pr_err("ksm: register sysfs failed\n");
kthread_stop(ksm_thread);
goto out_free;
}
#else
ksm_run = KSM_RUN_MERGE; /* no way for user to start it */ #endif /* CONFIG_SYSFS */ #ifdef CONFIG_MEMORY_HOTREMOVE
/* There is no significance to this priority 100 */
hotplug_memory_notifier(ksm_memory_callback, );
#endif
return ; out_free:
ksm_slab_free();
out:
return err;
}
sysfs相关层次为kernel_obj-->mm_obj-->ksm_attr_group，其中ksm_attr_group的.attrs为ksm_attrs。
创建节点/sys/kernel/mm/ksm如下，这些节点提供给用户对KSM进行控制。
下面是节点名、值、解释：
关于pages_shared、pages_sharing和page_unshared比例说明什么呢？
pages_sharing/pages_shared比例越高表示页面共享情况越好；pages_unshared/pages_sharing比例越高表示KSM收效很低。
ksm_scan_thread()是ksmd内核线程主干，每次执行ksm_do_scan()函数去扫描合并pages_to_scan个页面，然后睡眠等待sleep_millisecs毫秒。
如果无事可做会在ksm_thread_wait上等待，知道madvise唤醒。
static int ksm_scan_thread(void *nothing)
{
set_freezable();
set_user_nice(current, ); while (!kthread_should_stop()) {
mutex_lock(&ksm_thread_mutex);
wait_while_offlining();
if (ksmd_should_run())
ksm_do_scan(ksm_thread_pages_to_scan);
mutex_unlock(&ksm_thread_mutex); try_to_freeze(); if (ksmd_should_run()) {
schedule_timeout_interruptible(
msecs_to_jiffies(ksm_thread_sleep_millisecs));
} else {
wait_event_freezable(ksm_thread_wait,
ksmd_should_run() || kthread_should_stop());
}
}
return ;
}
ksm_do_scan是ksmd线程的实际执行者，它有着如下流程，将一个页面合并成KSM页面，包括查找stabke树和unstable树等，然后进行合并操作。
ksm_do_scan
scan_get_next_rmap_item---------------------选取合适的匿名页面
cmp_and_merge_page--------------------------将页面与root_stable_tree/root_unstable_tree中页面进行比较，判断是否能合并
stable_tree_search----------------------搜索stable红黑树并查找是否有和page内容一致的节点
try_to_merge_with_ksm_page--------------尝试将候选页合并到KSM页面中
stable_tree_append
unstable_tree_search_insert-------------搜索unstable红黑树中是否有和该页内容相同的节点
try_to_merge_two_pages------------------若在unstable红黑树中找到和当前页内容相同节点，尝试合并这两页面成为一个KSM页面
stable_tree_append----------------------将合并的两个页面对应rmap_item添加到stable节点哈希表中
break_cow
ksm_do_scan()函数如下：
static void ksm_do_scan(unsigned int scan_npages)
{
struct rmap_item *rmap_item;
struct page *uninitialized_var(page); while (scan_npages-- && likely(!freezing(current))) {----------------while中尝试去合并scan_npages个页面
cond_resched();
rmap_item = scan_get_next_rmap_item(&page);----------------------获取一个合适的匿名页面page
if (!rmap_item)
return;
cmp_and_merge_page(page, rmap_item);-----------------------------让page在KSM的stable和unstable两棵树中查找是否有合适合并的对象，并尝试去合并他们。
put_page(page);
}
}
scan_get_next_rmap_item()遍历ksm_mm_heand，然后再遍历进程地址空间的每个VMA，然后通过get_next_rmpa_item()返回rmap_item。
static struct rmap_item *scan_get_next_rmap_item(struct page **page)
{
struct mm_struct *mm;
struct mm_slot *slot;
struct vm_area_struct *vma;
struct rmap_item *rmap_item;
int nid; if (list_empty(&ksm_mm_head.mm_list))---------------------------------------为空表示没有mm_slot，所以不需要继续
return NULL; slot = ksm_scan.mm_slot;
if (slot == &ksm_mm_head) {-------------------------------------------------第一次运行ksmd，进行一些初始化工作。
...
if (!ksm_merge_across_nodes) {
struct stable_node *stable_node;
struct list_head *this, *next;
struct page *page; list_for_each_safe(this, next, &migrate_nodes) {
stable_node = list_entry(this,
struct stable_node, list);
page = get_ksm_page(stable_node, false);
if (page)
put_page(page);
cond_resched();
}
} for (nid = ; nid < ksm_nr_node_ids; nid++)
root_unstable_tree[nid] = RB_ROOT;----------------------------------unstable树初始化 spin_lock(&ksm_mmlist_lock);
slot = list_entry(slot->mm_list.next, struct mm_slot, mm_list);
ksm_scan.mm_slot = slot;
spin_unlock(&ksm_mmlist_lock);
/*
* Although we tested list_empty() above, a racing __ksm_exit
* of the last mm on the list may have removed it since then.
*/
if (slot == &ksm_mm_head)
return NULL;
next_mm:
ksm_scan.address = ;
ksm_scan.rmap_list = &slot->rmap_list;
} mm = slot->mm;
down_read(&mm->mmap_sem);
if (ksm_test_exit(mm))
vma = NULL;
else
vma = find_vma(mm, ksm_scan.address); for (; vma; vma = vma->vm_next) {-------------------------------------------for循环遍历所有VMA
if (!(vma->vm_flags & VM_MERGEABLE))
continue;
if (ksm_scan.address < vma->vm_start)
ksm_scan.address = vma->vm_start;
if (!vma->anon_vma)
ksm_scan.address = vma->vm_end; while (ksm_scan.address < vma->vm_end) {-------------------------------扫描VMA中所有虚拟页面
if (ksm_test_exit(mm))
break;
*page = follow_page(vma, ksm_scan.address, FOLL_GET);--------------follow_page函数从虚拟地址开始找回normal mapping页面的struct page数据结构
if (IS_ERR_OR_NULL(*page)) {
ksm_scan.address += PAGE_SIZE;
cond_resched();
continue;
}
if (PageAnon(*page) ||
page_trans_compound_anon(*page)) {-----------------------------只处理匿名页面情况
flush_anon_page(vma, *page, ksm_scan.address);
flush_dcache_page(*page);
rmap_item = get_next_rmap_item(slot,---------------------------去找mm_slot->rmap_list链表上是否有该虚拟地址对应的rmap_item，没有找到就新建一个。
ksm_scan.rmap_list, ksm_scan.address);
if (rmap_item) {
ksm_scan.rmap_list =
&rmap_item->rmap_list;
ksm_scan.address += PAGE_SIZE;
} else
put_page(*page);
up_read(&mm->mmap_sem);
return rmap_item;
}
put_page(*page);
ksm_scan.address += PAGE_SIZE;
cond_resched();
}
} if (ksm_test_exit(mm)) {-------------------------------------------------说明for循环里扫描该进程所有的VMA都没找到合适的匿名页面
ksm_scan.address = ;
ksm_scan.rmap_list = &slot->rmap_list;
}
/*
* Nuke all the rmap_items that are above this current rmap:
* because there were no VM_MERGEABLE vmas with such addresses.
*/
remove_trailing_rmap_items(slot, ksm_scan.rmap_list);--------------------在该进程中没找到合适的匿名页面时，那么对应的rmap_item已经没用必要占用空间，直接删除。 spin_lock(&ksm_mmlist_lock);
ksm_scan.mm_slot = list_entry(slot->mm_list.next,-----------------------取下一个mm_slot
struct mm_slot, mm_list);
if (ksm_scan.address == ) {--------------------------------------------处理该进程被销毁的情况，把mm_slot从ksm_mm_head链表中删除，释放mm_slot数据结构，清MMF_VM_MERGEABLE标志位。
/*
* We've completed a full scan of all vmas, holding mmap_sem
* throughout, and found no VM_MERGEABLE: so do the same as
* __ksm_exit does to remove this mm from all our lists now.
* This applies either when cleaning up after __ksm_exit
* (but beware: we can reach here even before __ksm_exit),
* or when all VM_MERGEABLE areas have been unmapped (and
* mmap_sem then protects against race with MADV_MERGEABLE).
*/
hash_del(&slot->link);
list_del(&slot->mm_list);
spin_unlock(&ksm_mmlist_lock); free_mm_slot(slot);
clear_bit(MMF_VM_MERGEABLE, &mm->flags);
up_read(&mm->mmap_sem);
mmdrop(mm);
} else {
spin_unlock(&ksm_mmlist_lock);
up_read(&mm->mmap_sem);
} /* Repeat until we've completed scanning the whole list */
slot = ksm_scan.mm_slot;
if (slot != &ksm_mm_head)
goto next_mm;----------------------------------------继续扫描下一个mm_slot ksm_scan.seqnr++;----------------------------------------扫描完一轮mm_slot，增加计数
return NULL;
}
cmp_and_merge_page()有两个参数，page表示刚才扫描mm_slot时找到的一个合格匿名页面，rmap_item表示该page对应的rmap_item数据结构。
static void cmp_and_merge_page(struct page *page, struct rmap_item *rmap_item)
{
struct rmap_item *tree_rmap_item;
struct page *tree_page = NULL;
struct stable_node *stable_node;
struct page *kpage;
unsigned int checksum;
int err; stable_node = page_stable_node(page);
if (stable_node) {
if (stable_node->head != &migrate_nodes &&
get_kpfn_nid(stable_node->kpfn) != NUMA(stable_node->nid)) {
rb_erase(&stable_node->node,
root_stable_tree + NUMA(stable_node->nid));
stable_node->head = &migrate_nodes;
list_add(&stable_node->list, stable_node->head);
}
if (stable_node->head != &migrate_nodes &&
rmap_item->head == stable_node)
return;
} /* We first start with searching the page inside the stable tree */
kpage = stable_tree_search(page);------------------------------------------在root_stabletree中查找页面内容和page相同的stable页。
if (kpage == page && rmap_item->head == stable_node) {---------------------说明kpage和page是同一个页面，说明该页已经是KSM页面，不需继续处理。
put_page(kpage);
return;
} remove_rmap_item_from_tree(rmap_item); if (kpage) {
err = try_to_merge_with_ksm_page(rmap_item, page, kpage);--------------如果在stable书中找到一个页面内容相同节点，那么尝试合并这个页面到节点上
if (!err) {
/*
* The page was successfully merged:
* add its rmap_item to the stable tree.
*/
lock_page(kpage);
stable_tree_append(rmap_item, page_stable_node(kpage));------------合并成功后，把rmap_item添加到stable_node->hlist哈希链表上。
unlock_page(kpage);
}
put_page(kpage);
return;
}
============================================================stable和unstable分割线========================================================================
/*
* If the hash value of the page has changed from the last time
* we calculated it, this page is changing frequently: therefore we
* don't want to insert it in the unstable tree, and we don't want
* to waste our time searching for something identical to it there.
*/
checksum = calc_checksum(page);--------------------------------------------再次计算校验值，如不等，则说明页面变动频繁，不适合添加到unstable红黑树中。
if (rmap_item->oldchecksum != checksum) {
rmap_item->oldchecksum = checksum;
return;
} tree_rmap_item =
unstable_tree_search_insert(rmap_item, page, &tree_page);--------------搜索root_unstable_tree中是否有和该页面内容相同的节点。
if (tree_rmap_item) {
kpage = try_to_merge_two_pages(rmap_item, page,
tree_rmap_item, tree_page);----------------------------尝试合并page和tree_page成为一个KSM页面kpage。
put_page(tree_page);
if (kpage) {
/*
* The pages were successfully merged: insert new
* node in the stable tree and add both rmap_items.
*/
lock_page(kpage);
stable_node = stable_tree_insert(kpage);---------------------------将kpage添加到root_stable_tree中，创建一个新stable_node节点。
if (stable_node) {
stable_tree_append(tree_rmap_item, stable_node);
stable_tree_append(rmap_item, stable_node);
}
unlock_page(kpage); /*
* If we fail to insert the page into the stable tree,
* we will have 2 virtual addresses that are pointing
* to a ksm page left outside the stable tree,
* in which case we need to break_cow on both.
*/
if (!stable_node) {------------------------------------------------如果stable_node插入到stable树失败，那么调用break_cow()主动触发一个却也中断来分离这个KSM页面。
break_cow(tree_rmap_item);
break_cow(rmap_item);
}
}
}
}
2. 匿名页面和KSM页面的区别
2.1 如何区分匿名页面和KSM页面？
如果struct page指向映射到用户虚拟内存空间的匿名页面，那么其成员mapping指向anon_vma。
mapping的低2位，表示匿名页面或者KSM。
/*
...
*
* PAGE_MAPPING_KSM without PAGE_MAPPING_ANON is currently never used.----------------所以说KSM肯定是匿名页面，KSM是匿名页面的子集。
...
*/
#define PAGE_MAPPING_ANON 1
#define PAGE_MAPPING_KSM 2
#define PAGE_MAPPING_FLAGS (PAGE_MAPPING_ANON | PAGE_MAPPING_KSM)
内核中提供两个函数检查页面的KSM或者匿名页面类型：
static inline int PageAnon(struct page *page)
{
return ((unsigned long)page->mapping & PAGE_MAPPING_ANON) != ;
} static inline int PageKsm(struct page *page)-----------------------------------------也可以看出KSM页面需同时具备ANON/KSM。
{
return ((unsigned long)page->mapping & PAGE_MAPPING_FLAGS) ==
(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM);
}
2.2 KSM页面和匿名页面的区别
分两种情况，一是父子进程VMA共享同一个匿名页面；二是不相干的进程VMA共享同一个匿名页面。
父进程在VMA映射匿名页面是会创建属于这个VMA的RMAP反向映射的设施，在__page_set_anon_rmap()例会设置page->index值为虚拟地址在VMA中的offset。
子进程fork时，复制了父进程的VMA内容到子进程的VMA中，并且复制父进程的页表到子进程中，因此对于父子进程来说，page->index值是一致的。
当需要从page找到所有映射page的虚拟地址时，在rmap_walk_anon()函数中，父子进程都是用page->index来计算在VMA中的虚拟地址。
在rmap_walk()中，如果是非KSM的匿名页面，使用rmap_walk_anon进行反向查找。
static int rmap_walk_anon(struct page *page, struct rmap_walk_control *rwc)
{
...
pgoff = page_to_pgoff(page);
anon_vma_interval_tree_foreach(avc, &anon_vma->rb_root, pgoff, pgoff) {
struct vm_area_struct *vma = avc->vma;
unsigned long address = vma_address(page, vma);----------------------根据page->index计算虚拟地址 if (rwc->invalid_vma && rwc->invalid_vma(vma, rwc->arg))
continue; ret = rwc->rmap_one(page, vma, address, rwc->arg);
if (ret != SWAP_AGAIN)
break;
if (rwc->done && rwc->done(page))
break;
}
anon_vma_unlock_read(anon_vma);
return ret;
}
KSM页面由内容相同的两个页面合并而成，他们可以是不同进程的VMA，也可以是父子进程的VMA。
int rmap_walk_ksm(struct page *page, struct rmap_walk_control *rwc)
{
...
again:
hlist_for_each_entry(rmap_item, &stable_node->hlist, hlist) {
struct anon_vma *anon_vma = rmap_item->anon_vma;
struct anon_vma_chain *vmac;
struct vm_area_struct *vma; anon_vma_lock_read(anon_vma);
anon_vma_interval_tree_foreach(vmac, &anon_vma->rb_root,
, ULONG_MAX) {
...
ret = rwc->rmap_one(page, vma,
rmap_item->address, rwc->arg);---------------------------使用rmap_item->address来获取每个VMA对应的虚拟地址
...
}
}
anon_vma_unlock_read(anon_vma);
}
...
}
因此对于KSM页面来说，page->index等于第一次映射该页的VMA中的offset。