这次采用U8X8的方式，不再采用u8g2，因为后者一直报内存问题。所以采用了不占内存的u8x8模式
同时u8g2库文件的示例代码也是很牛逼的，
里面还有message box 非常的可爱运行效果也非常棒！
代码如下
#include <Arduino.h>
#include <U8x8lib.h> #ifdef U8X8_HAVE_HW_SPI
#include <SPI.h>
#endif
U8X8_SSD1306_128X64_NONAME_SW_I2C u8x8(/* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ U8X8_PIN_NONE); // OLEDs without Reset of the Display
void setup(void)
{
//u8x8.begin();//可以定义按键如下
u8x8.begin(/*Select=*/ , /*Right/Next=*/ A1, /*Left/Prev=*/ A2, /*Up=*/ A0, /*Down=*/ A3, /*Home/Cancel=*/ ); u8x8.setPowerSave();
}
void loop(void)
{
/*u8x8.setFont(u8x8_font_chroma48medium8_r);
u8x8.drawString(0,0,"Hello World!");
u8x8.refreshDisplay();
delay(2000);*/ uint8_t r;
u8x8.setFont(u8x8_font_chroma48medium8_r);
r = u8x8_UserInterfaceMessage(u8x8.getU8x8(), "Message", "Box", NULL, " Ok \n Cancel ");
if ( r == )
{
u8x8.userInterfaceMessage("You pressed the", "Home/Quit", "Button", " Ok ");
}
else if ( r == )
{
u8x8.userInterfaceMessage("You selected the", "Ok", "Button", " Ok ");
}
else if ( r == )
{
u8x8.userInterfaceMessage("You selected the", "Cancel", "Button", " Ok ");
}
}
再也没有出现之前的动不动就报内存不足的问题。
同时还可以自己生成位图进行显示，比如二维码，不过，识别起来很吃力
代码如下
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h> #define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET); static const unsigned char PROGMEM logo[] =
{
0x9F,0xFE,0x6C,0x38,0xFF,0x6F,0xFF,0xFE,0xBF,0xFE,0x6C,0x38,0xFF,0x6F,0xFF,0xFE,
0xFF,0xFF,0xEF,0xB8,0xFF,0x7F,0xFF,0xFE,0xBF,0xFF,0xFF,0x9F,0xFF,0x7F,0x1F,0xFE,
0xFF,0xDF,0x39,0x9F,0xBE,0x7F,0x1F,0xFE,0xFF,0xFF,0x3D,0xFF,0xBF,0x7F,0xFF,0xFE,
0xFF,0xFF,0xFD,0xFE,0xFF,0xCF,0xFF,0xFE,0xFE,0xF7,0xCD,0x9E,0xF7,0xCF,0x9F,0xF2,
0xFF,0x7D,0x8D,0xBE,0xF7,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xB7,0xFF,0xFF,0xFE,
0xFF,0xFF,0xFF,0xDB,0xB7,0xFF,0xFF,0xFE,0xFF,0xEF,0xF7,0xFB,0xBF,0xFF,0xFF,0xFE,
0x36,0xFF,0xFF,0xF3,0xFF,0xFF,0xFF,0xFE,0x36,0xF3,0xFC,0xC3,0xF7,0x3F,0xFF,0xFE,
0xF7,0xE5,0xFF,0xFF,0xF7,0x3F,0xFF,0xFE,0xF7,0x81,0xFF,0x3E,0xF6,0x00,0x36,0x0E,
0xF8,0x73,0xF9,0xBF,0xD8,0x6C,0xE7,0xFE,0xFF,0xFF,0xFF,0xFF,0xD8,0x6F,0xF7,0xFE,
0xF7,0x8F,0xE5,0xDF,0x80,0x07,0xF6,0x00,0x3F,0xF8,0x3F,0xD8,0xDF,0x3F,0x3E,0xD8,
0xFF,0xFE,0x3F,0xFE,0xFF,0x3F,0xFE,0xD8,0xFC,0x0E,0x0C,0x3E,0x36,0x00,0xFE,0xC0,
0x36,0xFF,0x6C,0xFB,0xBF,0x6F,0x3F,0x8E,0x37,0xFF,0xFC,0xFF,0xFF,0xFF,0x3F,0xFE,
0x37,0xDF,0xFC,0x3F,0xFF,0xFC,0x3F,0xFC,0xFE,0xF3,0xED,0xB7,0xB3,0x0D,0xFF,0xF0,
0xFE,0xEF,0xEF,0xFF,0xB7,0x0F,0xFF,0xF0,0xF4,0xCE,0x07,0xFE,0x36,0x03,0xFE,0x70,
0x1F,0xE1,0xFF,0xB6,0xF6,0xF8,0xE6,0xD8,0x1F,0xE3,0xFF,0xF6,0xF7,0xFF,0xE7,0xD8,
0x06,0x03,0x7F,0xC6,0x03,0x67,0xE3,0x80,0xFE,0xF3,0x0D,0xF3,0xB6,0x6D,0xBF,0xF0,
0xFF,0xFF,0xFD,0xF3,0xBF,0xFF,0xFF,0xF8,0x07,0x9F,0xFD,0x83,0xBF,0xFF,0xE3,0x98,
0x36,0x7E,0x6F,0xFB,0x86,0x6F,0xFF,0x8E,0xF6,0x7E,0x6F,0xFF,0x87,0x7F,0xFF,0x8E,
0xE0,0x00,0x67,0xC6,0x03,0x3F,0xF7,0x80,0x33,0xFF,0xFF,0x00,0xDE,0x3F,0xF0,0xDE,
0xFB,0xFF,0xFF,0xFE,0xFE,0x3F,0xFE,0xDE,0xFC,0x0E,0x07,0xFE,0xF6,0x0F,0xFE,0xCE,
0xF6,0x7F,0x6C,0x3B,0xBE,0x6D,0xBF,0xFE,0xF7,0xFF,0xEC,0x3F,0xFF,0xED,0xBF,0xFE,
0x33,0xDE,0x6C,0x1F,0xFF,0xCC,0x1C,0xFE,0xFE,0xF0,0x4D,0xBB,0xB7,0xED,0x87,0xF0,
0xFE,0xEF,0xED,0xFF,0xF3,0xEF,0xFF,0xFE,0xFC,0xCE,0x0C,0xFE,0xC2,0x07,0xFE,0xCE,
0xFF,0xE3,0xFF,0xF6,0xC3,0xFF,0xB6,0xF0,0xFF,0xE3,0xFF,0xF7,0xC3,0xFF,0xFE,0xF8,
0xF8,0x03,0x7F,0xF3,0x83,0x7F,0xFE,0xD8,0xFE,0xF3,0xFF,0xFF,0xB3,0xFF,0xFF,0x98,
0xF6,0xFF,0xEF,0x9F,0xB7,0xED,0xFF,0xF8,0x00,0x0E,0x6F,0x1B,0xB7,0x6D,0xE3,0xF8,
0xFF,0xFF,0xFE,0x3B,0xB7,0xFF,0xFF,0xF8,0xFF,0xFF,0xFE,0x3E,0xDB,0xFF,0xFF,0xFE,
0xE0,0x5F,0x77,0x1E,0xDB,0xFF,0xE3,0xFE,0xFF,0xF7,0x7F,0xBF,0xDB,0xFF,0xFF,0xFE,
0xFF,0xFF,0x7F,0xFB,0xDB,0xFF,0xFF,0xF8,0xFF,0xFF,0x7F,0xC3,0xD8,0x07,0xFC,0xD8,
0xFF,0xFF,0x7F,0xC3,0xFB,0xFF,0xFF,0xF8,0xFF,0xFF,0x79,0x9B,0xFF,0xFC,0x7F,0xF8,
0xE0,0x7F,0x61,0x9B,0x9F,0x6C,0xFF,0xD8,0xF7,0xFF,0xFD,0x9B,0xDF,0xFC,0x7F,0xD8,
0xFF,0xE1,0xFC,0x00,0xC7,0xFC,0x00,0x00/*"C:\Users\Administrator\Desktop\6464qrco000000000de_15134800003995111111111111111827.bmp",0*/}; #if (SSD1306_LCDHEIGHT != 64)
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
#endif void setup() {
Serial.begin();
display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
display.clearDisplay();
display.drawBitmap(, , logo, , , );
} void loop() {
//display.drawBitmap(0, 0, logo, 64, 64, 1); //在坐标X0，Y0的位置开始显示图片
//128是取模软件显示的宽度
//64是取模软件显示的高度
// display.display(); //把缓存的都显示
//delay(1); // display.clearDisplay(); //清除屏幕
}