参考了：http://linux.chinaunix.net/techdoc/net/2007/03/14/952274.shtml，对其进行了部分修改完善。
依次执行
1、sudo apt-get samba samba-common smbfs smbclient swat
2、apt-get install xinetd swat依赖xineed才能正常工作
3、修改xinetd.conf (路径位置为：root@ubuntu:/etc#
vim xinetd.conf)
添加：swat stream tcp nowait.400 root /usr/sbin/tcpd \ /usr/sbin/swat
注意放在default 括号之外
---------------------------------------------------
root@ubuntu:/etc# cat xinetd.conf
# Simple configuration file for xinetd
#
# Some defaults, and include /etc/xinetd.d/
defaults
{
# Please note that you need a log_type line
to be able to use log_on_success
# and log_on_failure. The default is the
following :
# log_type = SYSLOG daemon info
}
includedir /etc/xinetd.d
swat stream tcp nowait.400 root
/usr/sbin/tcpd \ /usr/sbin/swat
-------------------------------------------------------
4、新建swat文件
vi /etc/xinetd.d/swat
内容如下：
代码:
# description: SAMBA SWAT
service swat
{
disable = no
socket_type = stream
protocol = tcp
#should use a more limited user here
user = root
wait = no
server = /usr/sbin/swat
}
5、sudo dpkg-reconfigure xinetd
6、查看swat是否运行
运行命令： netstat -lt
如果出现tcp 0 0 *:swat *:* LISTEN，表示swat配置运行成功，正在监听
--------------------------
root@ubuntu:/etc# netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp
0 0 *:swat *:* LISTEN
---------------------------------
这里使用的是IP访问
大功告成！