test.ino

void setup()
{
pinMode(,OUTPUT); } void loop()
{ digitalWrite(,HIGH);
delay();
digitalWrite(,LOW);
delay(); }

Arduino IDE console output(for easy read , I formated)

#step 1
E:\Arduino\arduino-1.7./hardware/tools/avr/bin/avr-g++
-c # just process , complie , assembl e , not link , so it generate object file
-g # for debug
-Os # optimize for size
-w # suppress all warning
-fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics
-MMD
-mmcu=atmega328p
-DF_CPU=16000000L
-DARDUINO=
-DARDUINO_AVR_NANO
-DARDUINO_ARCH_AVR
-IE:\Arduino\arduino-1.7.\hardware\arduino\avr\cores\arduino
-IE:\Arduino\arduino-1.7.\hardware\arduino\avr\variants\eightanaloginputs
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\test.cpp -o
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\test.cpp.o #step2
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\hooks.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\WInterrupts.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\wiring.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\wiring_analog.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\wiring_digital.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\wiring_pulse.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\wiring_shift.c.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\abi.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\CDC.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\HardwareSerial.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\HardwareSerial0.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\HardwareSerial1.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\HardwareSerial2.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\HardwareSerial3.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\HID.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\IPAddress.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\main.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\new.cpp.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\Print.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\Stream.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\Tone.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\USBCore.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\WMath.cpp.o
使用已经编译的文件:C:\Users\xxx\ AppData\Local\Temp\build4353357245568764721.tmp\WString.cpp.o
使用已经编译的文件:C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\core.a #step 3
E:\Arduino\arduino-1.7./hardware/tools/avr/bin/avr-gcc
-w
-Os
-Wl,
--gc-sections
-mmcu=atmega328p
-o C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp/test.cpp.elf
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp\test.cpp.o
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp/core.a
-L C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp -lm
E:\Arduino\arduino-1.7./hardware/tools/avr/bin/avr-objcopy
-O ihex
-j .eeprom --set-section-flags=.eeprom=alloc,load
--no-change-warnings
--change-section-lma .eeprom=
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp/test.cpp.elf
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp/test.cpp.eep

E:\Arduino\arduino-1.7./hardware/tools/avr/bin/avr-objcopy
-O ihex
-R .eeprom
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp/test.cpp.elf
C:\Users\xxx\AppData\Local\Temp\build4353357245568764721.tmp/test.cpp.hex

procedure map(I guss)

How arduino IDE works?-LMLPHP

05-08 08:09