呆若

呆若

关注
发信
关注(28)粉丝(399)

hosted-engine自承载引擎添加附加主机

首先启动第一台hosted-engine
[root@ovirthost18 ~]# hosted-engine --vm-start

50d9d728-9bcf-4ab6-a278-c5a454a32f2c
        Status = WaitForLaunch
        nicModel = rtl8139,pv
        statusTime = 4305117770
        emulatedMachine = pc
        pid = 0
        vmName = HostedEngine
        devices = [{'index': '2', 'iface': 'ide', 'specParams': {}, 'readonly': 'true', 'deviceId': '5a88fbe5-3e06-4d7b-bf92-107fd04671b5', 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': '0d00f1eb-6830-444e-96d0-6c0df99d7faf', 'imageID': '4af8861b-92b6-45c0-9761-d04f04c8f183', 'specParams': {}, 'readonly': 'false', 'domainID': 'c585e108-8832-489e-bad1-01bc9476e1e8', 'optional': 'false', 'deviceId': '4af8861b-92b6-45c0-9761-d04f04c8f183', 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': '00:16:3e:3b:7c:1a', 'linkActive': 'true', 'network': 'ovirtmgmt', 'filter': 'vdsm-no-mac-spoofing', 'specParams': {}, 'deviceId': 'a173df1e-2bb7-487c-885a-02b03ba3a46e', 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': 'b4086d8b-d69f-46e6-8fbb-4ab04b3a1708', 'alias': 'console0'}]
        guestDiskMapping = {}
        vmType = kvm
        clientIp =
        displaySecurePort = -1
        memSize = 16384
        displayPort = -1
        cpuType = Nehalem
        spiceSecureChannels = smain,sdisplay,sinputs,scursor,splayback,srecord,ssmartcard,susbredir
        smp = 4
        displayIp = 0
        display = vnc
[root@ovirthost18 ~]# hosted-engine --vm-status


--== Host 1 status ==--

Status up-to-date                  : True
Hostname                           : ovirthost18.skyovirt.com
Host ID                            : 1
Engine status                      : {"health": "good", "vm": "up", "detail": "up"}
Score                              : 0
stopped                            : False
Local maintenance                  : True
crc32                              : fe880da9
Host timestamp                     : 10511
在另一台主机上执行:
[root@ovirthost17 ~]# screen hosted-engine --deploy

点击(此处)折叠或打开

  1. [root@ovirthost17 ~]# screen hosted-engine --deploy
  2. [ INFO ] Stage: Initializing
  3. [ INFO ] Generating a temporary VNC password.
  4. [ INFO ] Stage: Environment setup
  5.           Continuing will configure this host for serving as hypervisor and create a VM where you have to install the engine afterwards.
  6.           Are you sure you want to continue? (Yes, No)[Yes]:

  8. [ INFO ] Stage: Initializing
  9. [ INFO ] Generating a temporary VNC password.
  10. [ INFO ] Stage: Environment setup
  11.           Continuing will configure this host for serving as hypervisor and create a VM where you have to install the engine afterwards.
  12.           Are you sure you want to continue? (Yes, No)[Yes]:
  13.           Configuration files: []
  14.           Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160311183220-et0uiy.log
  15.           Version: otopi-1.4.1 (otopi-1.4.1-1.el7.centos)
  16. [ INFO ] Hardware supports virtualization
  17. [ INFO ] Bridge ovirtmgmt already created
  18. [ INFO ] Stage: Environment packages setup
  19. [ INFO ] Stage: Programs detection
  20. [ INFO ] Stage: Environment setup
  21. [ INFO ] Stage: Environment customization
  22.          
  23.           --== STORAGE CONFIGURATION ==--
  24.          
  25.           During customization use CTRL-D to abort.
  26.           Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs
  27. [ INFO ] Please note that Replica 3 support is required for the shared storage.
  28.           Please specify the full shared storage connection path to use (example: host:/path): 192.168.184.17:/GO
  29. [ INFO ] GlusterFS replica 3 Volume detected
  30.           The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]?
  31. [ INFO ] Installing on additional host
  32.           Please specify the Host ID [Must be integer, default: 2]:
  33.          
  34.           --== SYSTEM CONFIGURATION ==--
  35.          
  36. [WARNING] A configuration file must be supplied to deploy Hosted Engine on an additional host.
  37.           The answer file may be fetched from an active HE host using scp.
  38.           If you do not want to download it automatically you can abort the setup answering no to the following question.
  39.           Do you want to scp the answer file from another HE host? (Yes, No)[Yes]:
  40.           Please provide the FQDN or IP of an active HE host: ovirthost18.skyovirt.com
  41.           Enter 'root' user password for host ovirthost18.skyovirt.com:
  42. [ INFO ] Answer file successfully downloaded
  43.          
  44.           --== NETWORK CONFIGURATION ==--
  45.          
  46.           iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: NO
  47.           The following CPU types are supported by this host:
  48.                  - model_Nehalem: Intel Nehalem Family
  49.                  - model_Penryn: Intel Penryn Family
  50.                  - model_Conroe: Intel Conroe Family
  51.          
  52.           --== HOSTED ENGINE CONFIGURATION ==--
  53.          
  54.           Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_2]: ovirthost17.skyovirt.com
  55.           Enter 'admin@internal' user password that will be used for accessing the Administrator Portal:
  56.           Confirm 'admin@internal' user password:
  57. [ INFO ] Stage: Setup validation
  58.          
  59.           --== CONFIGURATION PREVIEW ==--
  60.          
  61.           Engine FQDN : ovirt.skyovirt.com
  62.           Bridge name : ovirtmgmt
  63.           Host address : ovirthost17.skyovirt.com
  64.           SSH daemon port : 22
  65.           Gateway address : 192.168.184.1
  66.           Host name for web application : ovirthost17.skyovirt.com
  67.           Host ID : 2
  68.           Image size GB : 10
  69.           GlusterFS Share Name : hosted_engine_glusterfs
  70.           GlusterFS Brick Provisioning : False
  71.           Storage connection : 192.168.184.18:/GO
  72.           Console type : vnc
  73.           Memory size MB : 16384
  74.           MAC address : 00:16:3e:3b:7c:1a
  75.           Boot type : disk
  76.           Number of CPUs : 4
  77.           Restart engine VM after engine-setup: True
  78.           CPU Type : model_Nehalem
  79. [ INFO ] Stage: Transaction setup
  80. [ INFO ] Stage: Misc configuration
  81. [ INFO ] Stage: Package installation
  82. [ INFO ] Stage: Misc configuration
  83. [ INFO ] Configuring libvirt
  84. [ INFO ] Configuring VDSM
  85. [ INFO ] Starting vdsmd
  86. [ INFO ] Waiting for VDSM hardware info
  87. [ INFO ] Configuring VM
  88. [ INFO ] Updating hosted-engine configuration
  89. [ INFO ] Stage: Transaction commit
  90. [ INFO ] Stage: Closing up
  91. [ INFO ] Acquiring internal CA cert from the engine
  92. [ INFO ] The following CA certificate is going to be used, please immediately interrupt if not correct:
  93. [ INFO ] Issuer: C=US, O=skyovirt.com, CN=ovirt.skyovirt.com.69415, Subject: C=US, O=skyovirt.com, CN=ovirt.skyovirt.com.69415, Fingerprint (SHA-1): AECA33331DEC34A847A1B7BCAB02D8C2F3678770
  94. [ INFO ] Connecting to the Engine
  95. [ INFO ] Waiting for the host to become operational in the engine. This may take several minutes...
  96. [ INFO ] The VDSM Host is now operational
  97. [ INFO ] Enabling and starting HA services
  98. [ INFO ] Stage: Clean up
  99. [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160311183850.conf'
  100. [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'
  101. [ INFO ] Stage: Pre-termination
  102. [ INFO ] Stage: Termination
  103. [ INFO ] Hosted Engine successfully set up
  104. [screen is terminating]


08-30 09:13
Powered by LMLPHP ©2024 呆若 0.062019