自动化部署脚本文件目录：
运行主程序：./install.sh
#!/bin/bash
SCRIPTPATH=$(cd "$(dirname "$0")"; pwd)#
Install_log=$SCRIPTPATH/install_log.txt
echo "***start install***" > $Install_log
echo " workspace is $SCRIPTPATH" | tee -a "$Install_log"#写入日志文件日志
show_license() {
clear
confirm='Do you agree with this license? [y/n]: '
more license.txt
lic_agreed=''
while read -p 'Do you agree with this license? [y/n]: ' lic_agreed
do
case "$lic_agreed" in
y | Y ) break;;
n | N ) echo 'License refused - exiting.' ;exit 1;;
* ) ;;
esac
done
}
install_expect(){
# start install expect
rpm -ivh --force expect/tcl-8.5.13-8.el7.x86_64.rpm
if [[ 0 != $? ]] ; then
echo "tcl install Failed !!!!!!" | tee -a "$Install_log"
exit 1
else
echo "tcl install Success !!!!!!" | tee -a "$Install_log"
fi
rpm -ivh --force expect/expect-5.45-14.el7_1.x86_64.rpm
if [[ 0 != $? ]] ; then
echo "expect install Failed !!!!!!" | tee -a "$Install_log"
exit 1
else
echo "expect install Success !!!!!!" | tee -a "$Install_log"
fi
# expect install finish
}
install_unzip(){
# start unzip
rpm -ivh --force unzip/unzip-6.0-19.el7.x86_64.rpm
if [[ 0 != $? ]] ; then#$? 是上一个程序执行是否成功的标志，如果执行成功则$? 为0，否则 不为0
echo "unzip install Failed !!!!!!" | tee -a "$Install_log"
exit 1
else
echo "unzip install Success !!!!!!" | tee -a "$Install_log"
fi
#unzip install finish
}
install_killall(){
# start killall
rpm -ivh --force killall/psmisc-22.20-15.el7.x86_64.rpm
if [[ 0 != $? ]] ; then
echo "killall psmisc install Failed !!!!!!" | tee -a "$Install_log"
else
echo "killall psmisc install Success !!!!!!" | tee -a "$Install_log"
fi
#killall install finish
}
install_snmp(){
snmpstatus=0
rpm -ivh --force snmplib/net-snmp-libs-5.7.2-33.el7_5.2.x86_64.rpm
let snmpstatus+=$?
sleep 2
rpm -ivh --force snmplib/net-snmp-utils-5.7.2-33.el7_5.2.x86_64.rpm
let snmpstatus+=$?
if [[ 0 != $snmpstatus ]] ; then
echo "snmp install Failed !!!!!!" | tee -a "$Install_log"
else
echo "snmp install Success !!!!!!" | tee -a "$Install_log"
fi
}
install_java(){
#start to install java
rpm -ivh --force java/jdk-8u144-linux-x64.rpm
if [[ 0 != $? ]] ; then
echo "java install Failed !!!!!!" | tee -a "$Install_log"
exit 1
else
echo "java install Success !!!!!!" | tee -a "$Install_log"
fi
export JAVA_HOME=/usr/java/jdk1.8.0_144
export JRE_HOME=$JAVA_HOME/jre
export PATH=$PATH:$JAVA_HOME/bin:$JRE_HOME/bin
export CLASSPATH=:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar:$JRE_HOME/lib/dt.jar
#java install finish
}
install_activemq(){
#start to install activemq
tar zxvf activemq/apache-activemq-5.13.0.tar.gz | tee -a "$Install_log"
$SCRIPTPATH/apache-activemq-5.13.0/bin/linux-x86-64/activemq start &
sleep 5
echo "activemq install finish" | tee -a "$Install_log"
#activemq install finish
}
install_redis(){
#start to install redis
tar zxvf redis/redis-3.2.9.tar.gz
$SCRIPTPATH/redis-3.2.9/src/redis-server $SCRIPTPATH/redis-3.2.9/redis.conf &
sleep 5
echo "redis install finish" | tee -a "$Install_log"
#redis install finish
}
install_systemdlib(){
libstatus=0
rpm -ivh --force libsystemd/lz4-1.7.5-2.el7.x86_64.rpm
let libstatus+=$?
sleep 2
rpm -ivh --force libsystemd/systemd-libs-219-57.el7.x86_64.rpm
let libstatus+=$?
if [[ 0 != $libstatus ]] ; then
echo "systemdlib install Failed !!!!!!" | tee -a "$Install_log"
exit 1
else
echo "systemdlib install Success !!!!!!" | tee -a "$Install_log"
fi
}
install_postgres(){
#start to install postgres
cd postgres
status=0
rpm -ivh --force pgdg-centos96-9.6-3.noarch.rpm
let status+=$?# $?取上一个安装结果，安装成功为0，安装失败为1
sleep 2
rpm -ivh --force postgresql96-libs-9.6.5-1PGDG.rhel7.x86_64.rpm
let status+=$?
sleep 2
rpm -ivh --force postgresql96-9.6.5-1PGDG.rhel7.x86_64.rpm
let status+=$?
sleep 2
rpm -ivh --force libxslt-1.1.28-5.el7.x86_64.rpm
let status+=$?
sleep 2
rpm -ivh --force postgresql96-contrib-9.6.5-1PGDG.rhel7.x86_64.rpm
let status+=$?
sleep 2
rpm -ivh --force postgresql96-devel-9.6.5-1PGDG.rhel7.x86_64.rpm
let status+=$?
sleep 2
rpm -ivh --force postgresql96-server-9.6.5-1PGDG.rhel7.x86_64.rpm
let status+=$?
sleep 2
if [[ 0 != $status ]] ; then
echo "postgres install Failed !!!!!!" | tee -a "$Install_log"
exit 1
else
echo "postgres install Success !!!!!!" | tee -a "$Install_log"
fi
sleep 2
cd $SCRIPTPATH
#postgres install finish
}
init_postgresql(){n
#init postgresql
adduser uxsino
/usr/pgsql-9.6/bin/postgresql96-setup initdb
service postgresql-9.6 start
$SCRIPTPATH/init-data.sh | tee -a "$Install_log"
sleep 10
mv -f $SCRIPTPATH/postgresql.conf /var/lib/pgsql/9.6/data/
mv -f $SCRIPTPATH/pg_hba.conf /var/lib/pgsql/9.6/data/
sleep 5
service postgresql-9.6 restart
sleep 10
echo "postgresql init finish" | tee -a "$Install_log"
#postgresql init finish
}
stop_firewalld(){
#stop & disable firewalld
systemctl stop firewalld.service | tee -a "$Install_log"
sleep 10
systemctl disable firewalld.service | tee -a "$Install_log"
echo "stop & disable firewalld finish" | tee -a "$Install_log"
#stop & disable firewalld finish
}
auto_run_config(){
echo "export JAVA_HOME=/usr/java/jdk1.8.0_144" > $SCRIPTPATH/autostart.sh
echo "export JRE_HOME=$JAVA_HOME/jre" >> $SCRIPTPATH/autostart.sh
echo "export PATH=$PATH:$JAVA_HOME/bin:$JRE_HOME/bin" >> $SCRIPTPATH/autostart.sh
echo "export CLASSPATH=:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar:$JRE_HOME/lib/dt.jar" >> $SCRIPTPATH/autostart.sh
echo "service postgresql-9.6 restart" >> $SCRIPTPATH/autostart.sh
echo "sleep 30" >> $SCRIPTPATH/autostart.sh
echo "$SCRIPTPATH/redis-3.2.9/src/redis-server $SCRIPTPATH/redis-3.2.9/redis.conf &" >> $SCRIPTPATH/autostart.sh
echo "sleep 10" >> $SCRIPTPATH/autostart.sh
echo "$SCRIPTPATH/apache-activemq-5.13.0/bin/linux-x86-64/activemq start &" >> $SCRIPTPATH/autostart.sh
echo "sleep 10" >> $SCRIPTPATH/autostart.sh
echo "systemctl stop firewalld.service" >> $SCRIPTPATH/autostart.sh
echo "sleep 10" >> $SCRIPTPATH/autostart.sh
echo "$SCRIPTPATH/simo/scripts/runlib" >> $SCRIPTPATH/autostart.sh
chmod 777 $SCRIPTPATH/autostart.sh
confirm='Do you want set SIMO auto run? [y/n]: '
auto_agreed=''
while read -p 'Do you want set SIMO auto run? [y/n]: ' auto_agreed
do
case "$auto_agreed" in
y | Y )
#set simo auto run
echo "$SCRIPTPATH/autostart.sh" >> /etc/rc.d/rc.local #linux系统自启动文件需要配置的文件路径
chmod +x /etc/rc.d/rc.local
break;;
n | N ) echo 'Do not set SIMO auto run' ;break;;
* ) ;;
esac
done
}
#unzip simo and config simo
unzip_simo(){
unzip $SCRIPTPATH/simo-source/simo.zip
cp $SCRIPTPATH/application.properties $SCRIPTPATH/simo/scripts/
#enable/disable servicecenter
echo "$SCRIPTPATH/simo/scripts/runmodule simo-servicecenter 512m &" > $SCRIPTPATH/runlib
echo "sleep 5" >> $SCRIPTPATH/runlib
#enable/disable collector
echo "$SCRIPTPATH/simo/scripts/runmodule simo-collector 1024 &" >> $SCRIPTPATH/runlib
echo "sleep 5" >> $SCRIPTPATH/runlib
#enable/disable business
echo "$SCRIPTPATH/simo/scripts/runmodule simo-business 512m &" >> $SCRIPTPATH/runlib
echo "sleep 5" >> $SCRIPTPATH/runlib
#enable/disable itsm
echo "$SCRIPTPATH/simo/scripts/runmodule simo-itsm 1024m &" >> $SCRIPTPATH/runlib
echo "sleep 5" >> $SCRIPTPATH/runlib
#enable/disable cmdb
echo "$SCRIPTPATH/simo/scripts/runmodule simo-cmdb 512m &" >> $SCRIPTPATH/runlib
echo "sleep 5" >> $SCRIPTPATH/runlib
#enable/disable workflow
echo "$SCRIPTPATH/simo/scripts/runmodule simo-workflow 512m &" >> $SCRIPTPATH/runlib
echo "sleep 10" >> $SCRIPTPATH/runlib
#enable/disable mc
echo "$SCRIPTPATH/simo/scripts/runmodule simo-mc 2048m &" >> $SCRIPTPATH/runlib
mv -f $SCRIPTPATH/runlib $SCRIPTPATH/simo/scripts/
}
run_simo(){
chmod 777 $SCRIPTPATH/simo/scripts/runlib
$SCRIPTPATH/simo/scripts/runlib
}
show_license
install_expect
install_unzip
install_killall
install_snmp
install_java
install_activemq
install_redis
install_systemdlib
install_postgres
init_postgresql
stop_firewalld
auto_run_config
unzip_simo
run_simo
exit 0
init-data.sh脚本如下：
#!/usr/bin/expect
set timeout 900
set user postgres
spawn su $user
expect "bash-4.2*"
send "psql\r"
expect "postgres=#"
send "alter user postgres with password 'postgres';\r"
expect "postgres=#"
send "create user uxsino with password 'Uxs!nO10';\r"
expect "postgres=#"
send "create database simo_dev owner uxsino;\r"
expect "postgres=#"
send "GRANT ALL PRIVILEGES ON DATABASE simo_dev to uxsino;\r"
expect "postgres=#"
send "\\q\r"
expect "bash-4.2*"
send "exit\r"
expect eof