绑定前网卡驱动
[root@localhost ~]# ethtool -i enp5s0
driver: hinic
version:
firmware-version:
expansion-rom-version:
bus-info: 0000:05:00.0
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no
[root@localhost ~]#
安装ovs遇到一个问题那就是ovs version和dpdk version不匹配，华为鲲鹏920上安装的dpdk是dpdk-19.11
ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev
[root@localhost ~]# ovs-vsctl add-port br0 dpdk1 -- set Interface dpdk1 type=dpdk options:dpdk-devargs=0000:05:00.0ovs-vsctl: Error detected while setting up 'dpdk1': could not open network device dpdk1 (Address family not supported by protocol). See ovs-vswitchd log for details.ovs-vsctl: The default log directory is "/var/log/openvswitch".[root@localhost ~]# ovs-vsctl showbb6aa323-f96b-4872-98f8-7aa87fc99958 Bridge "br0" datapath_type: netdev Port "dpdk1" Interface "dpdk1" type: dpdk options: {dpdk-devargs="0000:05:00.0"} error: "could not open network device dpdk1 (Address family not supported by protocol)" Port "br0" Interface "br0" type: internal[root@localhost ~]#
[root@localhost dpdk-19.11]# ./usertools/dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
0000:05:00.0 'Hi1822 Family (2*25GE) 0200' drv=vfio-pci unused=hinic
0000:06:00.0 'Hi1822 Family (2*25GE) 0200' drv=vfio-pci unused=hinic
Network devices using kernel driver
===================================
0000:7d:00.0 'HNS GE/10GE/25GE RDMA Network Controller a222' if=enp125s0f0 drv=hns3 unused=hns_roce_hw_v2,vfio-pci *Active*
0000:7d:00.1 'HNS GE/10GE/25GE Network Controller a221' if=enp125s0f1 drv=hns3 unused=vfio-pci
0000:7d:00.2 'HNS GE/10GE/25GE RDMA Network Controller a222' if=enp125s0f2 drv=hns3 unused=hns_roce_hw_v2,vfio-pci
0000:7d:00.3 'HNS GE/10GE/25GE Network Controller a221' if=enp125s0f3 drv=hns3 unused=vfio-pci
No 'Baseband' devices detected
==============================
No 'Crypto' devices detected
============================
No 'Eventdev' devices detected
==============================
No 'Mempool' devices detected
=============================
No 'Compress' devices detected
==============================
No 'Misc (rawdev)' devices detected
===================================
[root@localhost dpdk-19.11]#
修改配置文件config/common_linuxapp，这里我们测试vhost模式，所以需要把下面两个配置项，配置为yes。
CONFIG_RTE_BUILD_COMBINE_LIBS=y
CONFIG_RTE_LIBRTE_VHOST=y
[root@localhost dpdk-19.11]# grep -n CONFIG_RTE_LIBRTE_VHOST config/common_base 1030:CONFIG_RTE_LIBRTE_VHOST=y1031:CONFIG_RTE_LIBRTE_VHOST_NUMA=n1032:CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
[root@localhost dpdk-19.11]# mkdir -p /usr/src/dpdk
[root@localhost dpdk-19.11]# make install T=arm64-armv8a-linuxapp-gcc DESTDIR=/usr/src/dpdk -j 64将dpdk安装到当前系统make install T=arm64-armv8a-linuxapp-gcc DESTDIR=/usr -j 64安装完成后可以使用dpdk的命令了
[root@localhost ~]# dpdk-devbind --status
Network devices using DPDK-compatible driver============================================0000:05:00.0 'Hi1822 Family (2*25GE) 0200' drv=vfio-pci unused=hinic0000:06:00.0 'Hi1822 Family (2*25GE) 0200' drv=vfio-pci unused=hinic
Network devices using kernel driver===================================0000:7d:00.0 'HNS GE/10GE/25GE RDMA Network Controller a222' if=enp125s0f0 drv=hns3 unused=hns_roce_hw_v2,vfio-pci *Active*0000:7d:00.1 'HNS GE/10GE/25GE Network Controller a221' if=enp125s0f1 drv=hns3 unused=vfio-pci 0000:7d:00.2 'HNS GE/10GE/25GE RDMA Network Controller a222' if=enp125s0f2 drv=hns3 unused=hns_roce_hw_v2,vfio-pci 0000:7d:00.3 'HNS GE/10GE/25GE Network Controller a221' if=enp125s0f3 drv=hns3 unused=vfio-pci
No 'Baseband' devices detected==============================
No 'Crypto' devices detected============================
No 'Eventdev' devices detected==============================
No 'Mempool' devices detected=============================
No 'Compress' devices detected==============================
No 'Misc (rawdev)' devices detected===================================
[root@localhost ~]# cd /usr/[root@localhost usr]# find ./ -name dpdk*./sbin/dpdk-devbind./bin/dpdk-test-compress-perf./bin/dpdk-pdump./bin/dpdk-test-crypto-perf./bin/dpdk-pmdinfo./bin/dpdk-test-eventdev./bin/dpdk-procinfo./src/dpdk./src/dpdk/sbin/dpdk-devbind./src/dpdk/bin/dpdk-test-compress-perf./src/dpdk/bin/dpdk-pdump./src/dpdk/bin/dpdk-test-crypto-perf./src/dpdk/bin/dpdk-pmdinfo./src/dpdk/bin/dpdk-test-eventdev./src/dpdk/bin/dpdk-procinfo./src/dpdk/lib/modules/4.14.0-115.el7a.0.1.aarch64/extra/dpdk./src/dpdk/include/dpdk./src/dpdk/share/dpdk./src/dpdk/share/dpdk/usertools/dpdk-pmdinfo.py./src/dpdk/share/dpdk/usertools/dpdk-devbind.py./src/dpdk/share/dpdk/usertools/dpdk-telemetry-client.py./src/dpdk/share/dpdk/usertools/dpdk-setup.sh./src/dpdk/share/dpdk/arm64-armv8a-linuxapp-gcc/app/dpdk-pmdinfogen./lib/modules/4.14.0-115.el7a.0.1.aarch64/extra/dpdk./include/dpdk./share/dpdk./share/dpdk/usertools/dpdk-pmdinfo.py./share/dpdk/usertools/dpdk-devbind.py./share/dpdk/usertools/dpdk-telemetry-client.py./share/dpdk/usertools/dpdk-setup.sh./share/dpdk/arm64-armv8a-linuxapp-gcc/app/dpdk-pmdinfogen[root@localhost usr]# dpdk-devbind -u 0000:05:00.0 0000:06:00.0
[root@localhost openvswitch-2.12.0]# ls
acinclude.m4 config.log Documentation Makefile ovsdb tests windows
aclocal.m4 config.status include Makefile.am package.m4 third-party xenserver
appveyor.yml configure ipsec Makefile.in poc tutorial
AUTHORS.rst configure.ac lib manpages.mk python utilities
boot.sh CONTRIBUTING.rst libtool NEWS README.rst Vagrantfile
build-aux datapath LICENSE NOTICE rhel Vagrantfile-FreeBSD
config.h datapath-windows m4 ofproto selinux vswitchd
config.h.in debian MAINTAINERS.rst ovn stamp-h1 vtep
[root@localhost openvswitch-2.12.0]# ./configure --with-dpdk=/usr/src/dpdk --prefix=/usr --sysconfdir=/etc --localstatedir=/var
===========================================================