关键词:warn_alloc()、__GFP_XXX、order、CMA等等。

在内存申请的时候经常会遇到类似“ xxx: page allocation failure: order:10...”类型的问题,这是warn_alloc()的输出。

warn_alloc()被如下函数调用:__alloc_pages_slowpath()、__vmalloc_area_node()、__vmalloc_node_range

下面分三部分了解这种问题的来龙去脉:

  • 什么情况会导致warn_alloc()?
  • warn_alloc()都做了哪些事情?
  • 结合实际问题分析问题原因。

1.触发warn_alloc()情况

要了什么情况下会导致warn_alloc(),就需要分析在何种情况下会被调用。

__alloc_pages_slowpath()表示页面申请进入了slowpath,那相对就有fastpath。

__alloc_pages_nodemask()中可知,这个fastpath就是get_page_from_freelist()。__alloc_pages_nodemask()是分配页面的后备选择。

static inline struct page *
__alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
struct alloc_context *ac)
{
bool can_direct_reclaim = gfp_mask & __GFP_DIRECT_RECLAIM;
struct page *page = NULL;
unsigned int alloc_flags;
unsigned long did_some_progress;
enum compact_priority compact_priority;
enum compact_result compact_result;
int compaction_retries;
int no_progress_loops;
unsigned long alloc_start = jiffies;
unsigned int stall_timeout = * HZ;
unsigned int cpuset_mems_cookie; if (order >= MAX_ORDER) {
WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
return NULL;
} if (WARN_ON_ONCE((gfp_mask & (__GFP_ATOMIC|__GFP_DIRECT_RECLAIM)) ==
(__GFP_ATOMIC|__GFP_DIRECT_RECLAIM)))
gfp_mask &= ~__GFP_ATOMIC; retry_cpuset:
compaction_retries = ;
no_progress_loops = ;
compact_priority = DEF_COMPACT_PRIORITY;
cpuset_mems_cookie = read_mems_allowed_begin(); ac->preferred_zoneref = first_zones_zonelist(ac->zonelist,
ac->high_zoneidx, ac->nodemask);
if (!ac->preferred_zoneref->zone)------------------------------------------------找不到合适的zone,进入nopage处理。
goto nopage; alloc_flags = gfp_to_alloc_flags(gfp_mask); if (gfp_mask & __GFP_KSWAPD_RECLAIM)
wake_all_kswapds(order, ac); page = get_page_from_freelist(gfp_mask, order, alloc_flags, ac);
if (page)
goto got_pg; if (can_direct_reclaim && order > PAGE_ALLOC_COSTLY_ORDER &&
!gfp_pfmemalloc_allowed(gfp_mask)) {-----------------------------------------在定义__GFP_DIRECT_RECLAIM、__GFP_MEMALLOC并且order大于3,也即分配超过8页内存的时候。
page = __alloc_pages_direct_compact(gfp_mask, order,
alloc_flags, ac,
INIT_COMPACT_PRIORITY,
&compact_result);---------------------------------------------页面较大情况下,走直接页面回收来获取内存。
if (page)
goto got_pg; if (gfp_mask & __GFP_NORETRY) {----------------------------------------------不做重试的情况。 if (compact_result == COMPACT_DEFERRED)----------------------------------compaction不成功,进入nopage处理。
goto nopage; compact_priority = INIT_COMPACT_PRIORITY;
}
} retry:
/* Ensure kswapd doesn't accidentally go to sleep as long as we loop */
if (gfp_mask & __GFP_KSWAPD_RECLAIM)
wake_all_kswapds(order, ac);-------------------------------------------------唤醒kswapd内核线程,让其处于工作状态。 if (gfp_pfmemalloc_allowed(gfp_mask))
alloc_flags = ALLOC_NO_WATERMARKS; if (!(alloc_flags & ALLOC_CPUSET) || (alloc_flags & ALLOC_NO_WATERMARKS)) {
ac->zonelist = node_zonelist(numa_node_id(), gfp_mask);
ac->preferred_zoneref = first_zones_zonelist(ac->zonelist,
ac->high_zoneidx, ac->nodemask);
} /* Attempt with potentially adjusted zonelist and alloc_flags */
page = get_page_from_freelist(gfp_mask, order, alloc_flags, ac);-----------------申请内存分配,成功则返回struct page地址。
if (page)
goto got_pg; /* Caller is not willing to reclaim, we can't balance anything */
if (!can_direct_reclaim) {-------------------------------------------------------既不能内存规整direct compact,也无法从freelist获取内存的情况,进入nopage流程。 WARN_ON_ONCE(gfp_mask & __GFP_NOFAIL);
goto nopage;
} /* Avoid recursion of direct reclaim */
if (current->flags & PF_MEMALLOC) { if (WARN_ON_ONCE(gfp_mask & __GFP_NOFAIL)) {
cond_resched();
goto retry;
}
goto nopage;
} /* Avoid allocations with no watermarks from looping endlessly */
if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
goto nopage; /* Try direct reclaim and then allocating */
page = __alloc_pages_direct_reclaim(gfp_mask, order, alloc_flags, ac,
&did_some_progress);
if (page)
goto got_pg; /* Try direct compaction and then allocating */
page = __alloc_pages_direct_compact(gfp_mask, order, alloc_flags, ac,
compact_priority, &compact_result);
if (page)
goto got_pg; /* Do not loop if specifically requested */
if (gfp_mask & __GFP_NORETRY)--------------------------------------------------------------强调不允许循环重试情况。
goto nopage; /*
* Do not retry costly high order allocations unless they are
* __GFP_REPEAT
*/
if (order > PAGE_ALLOC_COSTLY_ORDER && !(gfp_mask & __GFP_REPEAT))-------------------------针对高order情况,并且不允许__GFP_REPEAT的情况,进入nopage流程。
goto nopage; /* Make sure we know about allocations which stall for too long */
if (time_after(jiffies, alloc_start + stall_timeout)) {------------------------------------内存分配持续时间超过stall_timeout,初始为10秒,后面以10秒递增报警。
warn_alloc(gfp_mask,
"page allocation stalls for %ums, order:%u",
jiffies_to_msecs(jiffies-alloc_start), order);
stall_timeout += * HZ;
} if (should_reclaim_retry(gfp_mask, order, ac, alloc_flags,
did_some_progress > , &no_progress_loops))
goto retry; if (did_some_progress > &&
should_compact_retry(ac, order, alloc_flags,
compact_result, &compact_priority,
&compaction_retries))
goto retry; if (read_mems_allowed_retry(cpuset_mems_cookie))
goto retry_cpuset; /* Reclaim has failed us, start killing things */
page = __alloc_pages_may_oom(gfp_mask, order, ac, &did_some_progress);----------------------分配页面,并且判断是否需要启动OOM killer,did_some_progress会导致retry。如果order小于3则不会进入OOM。
if (page)
goto got_pg; /* Retry as long as the OOM killer is making progress */
if (did_some_progress) {
no_progress_loops = ;
goto retry;
} nopage: if (read_mems_allowed_retry(cpuset_mems_cookie))
goto retry_cpuset;----------------------------------------------------------------------进入retry_cpuset循环处理。 warn_alloc(gfp_mask,
"page allocation failure: order:%u", order);----------------------------------------无法满足分配order大小页面。
got_pg:
return page;
}

下面两个函数都是vmalloc相关,__vmalloc_area_node()在分配失败之后进入fail,调用warn_alloc()输出log。

static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
pgprot_t prot, int node)
{
struct page **pages;
unsigned int nr_pages, array_size, i;
const gfp_t nested_gfp = (gfp_mask & GFP_RECLAIM_MASK) | __GFP_ZERO;
const gfp_t alloc_mask = gfp_mask | __GFP_NOWARN; nr_pages = get_vm_area_size(area) >> PAGE_SHIFT;
array_size = (nr_pages * sizeof(struct page *)); area->nr_pages = nr_pages;
/* Please note that the recursion is strictly bounded. */
if (array_size > PAGE_SIZE) {
pages = __vmalloc_node(array_size, , nested_gfp|__GFP_HIGHMEM,
PAGE_KERNEL, node, area->caller);
} else {
pages = kmalloc_node(array_size, nested_gfp, node);
}
area->pages = pages;
if (!area->pages) {
remove_vm_area(area->addr);
kfree(area);
return NULL;
} for (i = ; i < area->nr_pages; i++) {
struct page *page; if (node == NUMA_NO_NODE)
page = alloc_page(alloc_mask);
else
page = alloc_pages_node(node, alloc_mask, ); if (unlikely(!page)) {
/* Successfully allocated i pages, free them in __vunmap() */
area->nr_pages = i;
goto fail;
}
area->pages[i] = page;
if (gfpflags_allow_blocking(gfp_mask))
cond_resched();
} if (map_vm_area(area, prot, pages))
goto fail;
return area->addr; fail:
warn_alloc(gfp_mask,
"vmalloc: allocation failure, allocated %ld of %ld bytes",
(area->nr_pages*PAGE_SIZE), area->size);
vfree(area->addr);
return NULL;
}
void *__vmalloc_node_range(unsigned long size, unsigned long align,
unsigned long start, unsigned long end, gfp_t gfp_mask,
pgprot_t prot, unsigned long vm_flags, int node,
const void *caller)
{
struct vm_struct *area;
void *addr;
unsigned long real_size = size; size = PAGE_ALIGN(size);
if (!size || (size >> PAGE_SHIFT) > totalram_pages)
goto fail; area = __get_vm_area_node(size, align, VM_ALLOC | VM_UNINITIALIZED |
vm_flags, start, end, node, gfp_mask, caller);
if (!area)
goto fail; addr =__vmalloc_area_node(area, gfp_mask, prot, node);
if (!addr)
return NULL; clear_vm_uninitialized_flag(area); kmemleak_alloc(addr, real_size, , gfp_mask); return addr; fail:
warn_alloc(gfp_mask,
"vmalloc: allocation failure: %lu bytes", real_size);
return NULL;
}

2. warn_alloc()解析

warn_alloc()首先显示相关进程和内存分配gfp_mask信息,然后打印栈信息,

void warn_alloc(gfp_t gfp_mask, const char *fmt, ...)
{
unsigned int filter = SHOW_MEM_FILTER_NODES;
struct va_format vaf;
va_list args; if ((gfp_mask & __GFP_NOWARN) || !__ratelimit(&nopage_rs) ||
debug_guardpage_minorder() > )
return; if (!(gfp_mask & __GFP_NOMEMALLOC))
if (test_thread_flag(TIF_MEMDIE) ||
(current->flags & (PF_MEMALLOC | PF_EXITING)))
filter &= ~SHOW_MEM_FILTER_NODES;
if (in_interrupt() || !(gfp_mask & __GFP_DIRECT_RECLAIM))
filter &= ~SHOW_MEM_FILTER_NODES; pr_warn("%s: ", current->comm);------------------------------------显示对应进程名称。 va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
pr_cont("%pV", &vaf);
va_end(args);------------------------------------------------------显示warn_alloc()传入的参数。 pr_cont(", mode:%#x(%pGg)\n", gfp_mask, &gfp_mask);----------------显示gfp_mask。 dump_stack();------------------------------------------------------显示栈信息。
if (!should_suppress_show_mem())
show_mem(filter);----------------------------------------------显示内存信息,这里是重点。
}

show_mem()显示详细的内存信息。

void show_mem(unsigned int filter)
{
pg_data_t *pgdat;
unsigned long total = , reserved = , highmem = ; printk("Mem-Info:\n");
show_free_areas(filter); for_each_online_pgdat(pgdat) {
unsigned long flags;
int zoneid; pgdat_resize_lock(pgdat, &flags);
for (zoneid = ; zoneid < MAX_NR_ZONES; zoneid++) {
struct zone *zone = &pgdat->node_zones[zoneid];
if (!populated_zone(zone))
continue; total += zone->present_pages;
reserved += zone->present_pages - zone->managed_pages; if (is_highmem_idx(zoneid))
highmem += zone->present_pages;
}
pgdat_resize_unlock(pgdat, &flags);
} printk("%lu pages RAM\n", total);-------------------------------整个平台的页面统计信息:所有页面数、reserved、cma等等。
printk("%lu pages HighMem/MovableOnly\n", highmem);
printk("%lu pages reserved\n", reserved);
#ifdef CONFIG_CMA
printk("%lu pages cma reserved\n", totalcma_pages);
#endif
#ifdef CONFIG_QUICKLIST
printk("%lu pages in pagetable cache\n",
quicklist_total_size());
#endif
#ifdef CONFIG_MEMORY_FAILURE
printk("%lu pages hwpoisoned\n", atomic_long_read(&num_poisoned_pages));
#endif
}

show_free_areas()从所有node、不同node、不同zone、同一zone下不同order分别显示空闲页面信息。

void show_free_areas(unsigned int filter)
{
unsigned long free_pcp = ;
int cpu;
struct zone *zone;
pg_data_t *pgdat; for_each_populated_zone(zone) {
if (skip_free_areas_node(filter, zone_to_nid(zone)))
continue; for_each_online_cpu(cpu)
free_pcp += per_cpu_ptr(zone->pageset, cpu)->pcp.count;
} printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n"-----------------显示所有node的统计信息。
" active_file:%lu inactive_file:%lu isolated_file:%lu\n"
" unevictable:%lu dirty:%lu writeback:%lu unstable:%lu\n"
" slab_reclaimable:%lu slab_unreclaimable:%lu\n"
" mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n"
" free:%lu free_pcp:%lu free_cma:%lu\n",
global_node_page_state(NR_ACTIVE_ANON),
global_node_page_state(NR_INACTIVE_ANON),
global_node_page_state(NR_ISOLATED_ANON),
global_node_page_state(NR_ACTIVE_FILE),
global_node_page_state(NR_INACTIVE_FILE),
global_node_page_state(NR_ISOLATED_FILE),
global_node_page_state(NR_UNEVICTABLE),
global_node_page_state(NR_FILE_DIRTY),
global_node_page_state(NR_WRITEBACK),
global_node_page_state(NR_UNSTABLE_NFS),
global_page_state(NR_SLAB_RECLAIMABLE),
global_page_state(NR_SLAB_UNRECLAIMABLE),
global_node_page_state(NR_FILE_MAPPED),
global_node_page_state(NR_SHMEM),
global_page_state(NR_PAGETABLE),
global_page_state(NR_BOUNCE),
global_page_state(NR_FREE_PAGES),
free_pcp,
global_page_state(NR_FREE_CMA_PAGES)); for_each_online_pgdat(pgdat) {-------------------------------------------------分别显示不同node的统计信息。
printk("Node %d"
" active_anon:%lukB"
" inactive_anon:%lukB"
" active_file:%lukB"
" inactive_file:%lukB"
" unevictable:%lukB"
" isolated(anon):%lukB"
" isolated(file):%lukB"
" mapped:%lukB"
" dirty:%lukB"
" writeback:%lukB"
" shmem:%lukB"
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
" shmem_thp: %lukB"
" shmem_pmdmapped: %lukB"
" anon_thp: %lukB"
#endif
" writeback_tmp:%lukB"
" unstable:%lukB"
" pages_scanned:%lu"
" all_unreclaimable? %s"
"\n",
pgdat->node_id,
K(node_page_state(pgdat, NR_ACTIVE_ANON)),
K(node_page_state(pgdat, NR_INACTIVE_ANON)),
K(node_page_state(pgdat, NR_ACTIVE_FILE)),
K(node_page_state(pgdat, NR_INACTIVE_FILE)),
K(node_page_state(pgdat, NR_UNEVICTABLE)),
K(node_page_state(pgdat, NR_ISOLATED_ANON)),
K(node_page_state(pgdat, NR_ISOLATED_FILE)),
K(node_page_state(pgdat, NR_FILE_MAPPED)),
K(node_page_state(pgdat, NR_FILE_DIRTY)),
K(node_page_state(pgdat, NR_WRITEBACK)),
K(node_page_state(pgdat, NR_SHMEM)),
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
K(node_page_state(pgdat, NR_SHMEM_THPS) * HPAGE_PMD_NR),
K(node_page_state(pgdat, NR_SHMEM_PMDMAPPED)
* HPAGE_PMD_NR),
K(node_page_state(pgdat, NR_ANON_THPS) * HPAGE_PMD_NR),
#endif
K(node_page_state(pgdat, NR_WRITEBACK_TEMP)),
K(node_page_state(pgdat, NR_UNSTABLE_NFS)),
node_page_state(pgdat, NR_PAGES_SCANNED),
!pgdat_reclaimable(pgdat) ? "yes" : "no");
} for_each_populated_zone(zone) {----------------------------------------------分别显示所有zone的统计信息。
int i; if (skip_free_areas_node(filter, zone_to_nid(zone)))
continue; free_pcp = ;
for_each_online_cpu(cpu)
free_pcp += per_cpu_ptr(zone->pageset, cpu)->pcp.count; show_node(zone);
printk(KERN_CONT
"%s"
" free:%lukB"
" min:%lukB"
" low:%lukB"
" high:%lukB"
" active_anon:%lukB"
" inactive_anon:%lukB"
" active_file:%lukB"
" inactive_file:%lukB"
" unevictable:%lukB"
" writepending:%lukB"
" present:%lukB"
" managed:%lukB"
" mlocked:%lukB"
" slab_reclaimable:%lukB"
" slab_unreclaimable:%lukB"
" kernel_stack:%lukB"
" pagetables:%lukB"
" bounce:%lukB"
" free_pcp:%lukB"
" local_pcp:%ukB"
" free_cma:%lukB"
"\n",
zone->name,
K(zone_page_state(zone, NR_FREE_PAGES)),
K(min_wmark_pages(zone)),
K(low_wmark_pages(zone)),
K(high_wmark_pages(zone)),
K(zone_page_state(zone, NR_ZONE_ACTIVE_ANON)),
K(zone_page_state(zone, NR_ZONE_INACTIVE_ANON)),
K(zone_page_state(zone, NR_ZONE_ACTIVE_FILE)),
K(zone_page_state(zone, NR_ZONE_INACTIVE_FILE)),
K(zone_page_state(zone, NR_ZONE_UNEVICTABLE)),
K(zone_page_state(zone, NR_ZONE_WRITE_PENDING)),
K(zone->present_pages),
K(zone->managed_pages),
K(zone_page_state(zone, NR_MLOCK)),
K(zone_page_state(zone, NR_SLAB_RECLAIMABLE)),
K(zone_page_state(zone, NR_SLAB_UNRECLAIMABLE)),
zone_page_state(zone, NR_KERNEL_STACK_KB),
K(zone_page_state(zone, NR_PAGETABLE)),
K(zone_page_state(zone, NR_BOUNCE)),
K(free_pcp),
K(this_cpu_read(zone->pageset->pcp.count)),
K(zone_page_state(zone, NR_FREE_CMA_PAGES)));
printk("lowmem_reserve[]:");
for (i = ; i < MAX_NR_ZONES; i++)
printk(KERN_CONT " %ld", zone->lowmem_reserve[i]);
printk(KERN_CONT "\n");
} for_each_populated_zone(zone) {-------------------------------------------显示所有zone下不同order空闲数目统计信息。
unsigned int order;
unsigned long nr[MAX_ORDER], flags, total = ;
unsigned char types[MAX_ORDER]; if (skip_free_areas_node(filter, zone_to_nid(zone)))
continue;
show_node(zone);
printk(KERN_CONT "%s: ", zone->name); spin_lock_irqsave(&zone->lock, flags);
for (order = ; order < MAX_ORDER; order++) {-------------------------遍历当前zone的不同order,不同order区域数目存在nr[]中,total是总的页面数目。
struct free_area *area = &zone->free_area[order];
int type; nr[order] = area->nr_free;
total += nr[order] << order; types[order] = ;
for (type = ; type < MIGRATE_TYPES; type++) {
if (!list_empty(&area->free_list[type]))
types[order] |= << type;--------------------------------记录order区域中页面类型。
}
}
spin_unlock_irqrestore(&zone->lock, flags);
for (order = ; order < MAX_ORDER; order++) {
printk(KERN_CONT "%lu*%lukB ",
nr[order], K(1UL) << order);-------------------------------输出不同order区域数量和区域大小。
if (nr[order])
show_migration_types(types[order]);---------------------------输出页面类型。
}
printk(KERN_CONT "= %lukB\n", K(total));------------------------------显示总大小。
} hugetlb_show_meminfo();---------------------------------------------------显示huge page统计信息。 printk("%ld total pagecache pages\n", global_node_page_state(NR_FILE_PAGES));---总的文件缓存页面数量。 show_swap_cache_info();----------------------------------------------------显示swap cache统计信息。
}

不同的页面有不同的属性,在warn_alloc()输出的字母对应了页面的属性。主要有M、U、E、C。

static void show_migration_types(unsigned char type)
{
static const char types[MIGRATE_TYPES] = {
[MIGRATE_UNMOVABLE] = 'U',--------------------------不可移动。
[MIGRATE_MOVABLE] = 'M',----------------------------可移动。
[MIGRATE_RECLAIMABLE] = 'E',------------------------可回收。
[MIGRATE_HIGHATOMIC] = 'H',-------------------------等同于MIGRATE_PCPTYPES。
#ifdef CONFIG_CMA
[MIGRATE_CMA] = 'C',----------------------------CMA区域页面。
#endif
#ifdef CONFIG_MEMORY_ISOLATION
[MIGRATE_ISOLATE] = 'I',
#endif
};
char tmp[MIGRATE_TYPES + ];
char *p = tmp;
int i; for (i = ; i < MIGRATE_TYPES; i++) {
if (type & ( << i))
*p++ = types[i];
} *p = '\0';
printk(KERN_CONT "(%s) ", tmp);
}

经过上面的分析,基本上明白每一行的输出的来源。具体每个字段表示的内存含义,还需要结合代码阅读。

3. 实例解析

下面结合实际问题log输出来分析问题,进而解决问题。

表示进程xxxx在分配order为10个连续物理页面时失败,mode表示内存分配的页模式,具体在include/linux/gfp.h中定义。

内存碎片会导致page分配失败,即使还有很多空闲page。当order=0时,表示系统当前已经完全OOM。

[ 2161.623563] xxxx: page allocation failure: order:, mode:0x2084020(GFP_ATOMIC|__GFP_COMP)-----------------warn_alloc(),从这里可以知道是哪个进程页面分配失败,并且有对应的gfp_mask。
[ 2161.632085] CPU: PID: Comm: AiApp Not tainted 4.9. #53---------------------------------------------dump_stack(),栈信息指出了更详细的调用路径。
[ 2161.637947]
Call Trace:
[<802f63f2>] dump_stack+0x1e/0x3c
[<800f6cf4>] warn_alloc+0x100/0x148
[<800f709c>] __alloc_pages_nodemask+0x2bc/0xb5c
[<801120fe>] kmalloc_order+0x26/0x48
[<>] kmalloc_order_trace+0x38/0x98
[<8012c5d8>] __kmalloc+0xf4/0x12c
[<8048ac78>] alloc_ep_req+0x5c/0x98
[<8048f232>] source_sink_recv+0x2a/0xe0
[<8048f35e>] usb_sourcesink_bulk_read+0x76/0x1c8
[<8048f770>] usb_sourcesink_read+0xfc/0x2c8
[<80134d58>] __vfs_read+0x30/0x108
[<80135c14>] vfs_read+0x94/0x128
[<80136d12>] SyS_read+0x52/0xd4
[<8004a246>] csky_systemcall+0x96/0xe0
[ 2161.689204] Mem-Info:--------------------------------------------------------------show_mem()
[ 2161.691518] active_anon: inactive_anon: isolated_anon:0-----------------------所有node统计信息。
[ 2161.691518] active_file: inactive_file: isolated_file:
[ 2161.691518] unevictable: dirty: writeback: unstable:
[ 2161.691518] slab_reclaimable: slab_unreclaimable:
[ 2161.691518] mapped: shmem: pagetables: bounce:
[ 2161.691518] free: free_pcp: free_cma:60234
--------------------------------------------------------------------------------------只有一个node,输出node 0统计信息。
[ 2161.724334] Node active_anon:13072kB inactive_anon:8kB active_file:5084kB inactive_file:357144kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:17128kB dirty:1372kB writeback:0kB shmem:16kB writeback_tmp:0kB unstable:0kB pages_scanned: all_unreclaimable? no
--------------------------------------------------------------------------------------输出Normal zone统计信息。
[ 2161.748626] Normal free:248344kB min:2444kB low:3052kB high:3660kB active_anon:13072kB inactive_anon:8kB active_file:5084kB inactive_file:357144kB unevictable:0kB writepending:1372kB present:1048572kB managed:734568kB mlocked:0kB slab_reclaimable:8076kB slab_unreclaimable:2576kB kernel_stack:608kB pagetables:236kB bounce:0kB free_pcp:796kB local_pcp:796kB free_cma:240936kB
[ 2161.781670] lowmem_reserve[]: 0
---------------------------------------------------------------------------------------输出Normal zone下不同order的空闲情况,包括其中页面属性。
[ 2161.785225] Normal: *4kB (UEC) *8kB (EC) *16kB (UEC) *32kB (UE) *64kB (UE) *128kB (UE) *256kB (EC) *512kB (E) *1024kB (UEC) *2048kB (UEC) *4096kB (C) = 248344kB
total pagecache pages
---------------------------------------------------------------------------------------整个平台页面统计信息。
[ 2161.803526] pages RAM
[ 2161.806410] pages HighMem/MovableOnly
[ 2161.810264] pages reserved
[ 2161.813509] pages cma reserved

从stack信息可以得知,alloc_ep_req()是分配内存的起点。

struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len)
{
struct usb_request *req; req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (req) {
req->length = usb_endpoint_dir_out(ep->desc) ?
usb_ep_align(ep, len) : len;
req->buf = kmalloc(req->length, GFP_ATOMIC);
if (!req->buf) {
usb_ep_free_request(ep, req);
req = NULL;
}
}
return req;
}

3.1 GFP_ATOMIC和__GFP_COMP:页面分配标志

从代码可知此时gfp_mask为GFP_ATOMIC,这种情况是不允许__GFP_DIRECT_RECLAIM页面直接回收的。

#define GFP_ATOMIC    (__GFP_HIGH|__GFP_ATOMIC|__GFP_KSWAPD_RECLAIM)
#define __GFP_HIGH ((__force gfp_t)___GFP_HIGH)----------------------------------------------表示更高优先级。
#define __GFP_ATOMIC ((__force gfp_t)___GFP_ATOMIC)------------------------------------------表示调用者不可以回收页面或者睡眠,并且是高优先级。典型的应用是中断处理中。
#define __GFP_KSWAPD_RECLAIM ((__force gfp_t)___GFP_KSWAPD_RECLAIM) /* kswapd can wake */----在内存分配的时候,主动唤醒kswapd线程。
#define __GFP_COMP ((__force gfp_t)___GFP_COMP)----------------------------------------------复合页标志位,表示将两个或多个也看成一个页面。

GFP位掩码定义如下:

#define ___GFP_DMA        0x01u
#define ___GFP_HIGHMEM 0x02u
#define ___GFP_DMA32 0x04u
#define ___GFP_MOVABLE 0x08u
#define ___GFP_RECLAIMABLE 0x10u
#define ___GFP_HIGH 0x20u
#define ___GFP_IO 0x40u
#define ___GFP_FS 0x80u
#define ___GFP_COLD 0x100u
#define ___GFP_NOWARN 0x200u
#define ___GFP_REPEAT 0x400u
#define ___GFP_NOFAIL 0x800u
#define ___GFP_NORETRY 0x1000u
#define ___GFP_MEMALLOC 0x2000u
#define ___GFP_COMP 0x4000u
#define ___GFP_ZERO 0x8000u
#define ___GFP_NOMEMALLOC 0x10000u
#define ___GFP_HARDWALL 0x20000u
#define ___GFP_THISNODE 0x40000u
#define ___GFP_ATOMIC 0x80000u
#define ___GFP_ACCOUNT 0x100000u
#define ___GFP_NOTRACK 0x200000u
#define ___GFP_DIRECT_RECLAIM 0x400000u
#define ___GFP_OTHER_NODE 0x800000u
#define ___GFP_WRITE 0x1000000u
#define ___GFP_KSWAPD_RECLAIM 0x2000000u

3.2 gfp和migrate转换,进而alloc_flags:为什么不能使用CMA区域?

gfp_mask决定了申请页面的migratetype,然后在CMA存在的情况下根据migratetype决定是否可用CMA区域。

static inline unsigned int
gfp_to_alloc_flags(gfp_t gfp_mask)
{
unsigned int alloc_flags = ALLOC_WMARK_MIN | ALLOC_CPUSET; /* __GFP_HIGH is assumed to be the same as ALLOC_HIGH to save a branch. */
BUILD_BUG_ON(__GFP_HIGH != (__force gfp_t) ALLOC_HIGH); alloc_flags |= (__force int) (gfp_mask & __GFP_HIGH);------------------------------__GFP_HIGH到ALLOC_HIGH转换。 if (gfp_mask & __GFP_ATOMIC) { if (!(gfp_mask & __GFP_NOMEMALLOC))
alloc_flags |= ALLOC_HARDER; alloc_flags &= ~ALLOC_CPUSET;
} else if (unlikely(rt_task(current)) && !in_interrupt())
alloc_flags |= ALLOC_HARDER; #ifdef CONFIG_CMA
if (gfpflags_to_migratetype(gfp_mask) == MIGRATE_MOVABLE)---------------------------将gfp_mask转换到migratetype,判断是否是MIGRATE_MOVABLE。如果是,则可以在CMA去榆中分配。也就是说必须gfp_flags中包含__GFP_MOVABLE才可以在CMA中分配。
alloc_flags |= ALLOC_CMA;
#endif
return alloc_flags;
} #define GFP_MOVABLE_MASK (__GFP_RECLAIMABLE|__GFP_MOVABLE)------------------------------___GFP_MOVABLE为0x08,___GFP_RECLAIMABLE为0x10。
#define GFP_MOVABLE_SHIFT 3 static inline int gfpflags_to_migratetype(const gfp_t gfp_flags)
{
VM_WARN_ON((gfp_flags & GFP_MOVABLE_MASK) == GFP_MOVABLE_MASK);
BUILD_BUG_ON((1UL << GFP_MOVABLE_SHIFT) != ___GFP_MOVABLE);
BUILD_BUG_ON((___GFP_MOVABLE >> GFP_MOVABLE_SHIFT) != MIGRATE_MOVABLE); if (unlikely(page_group_by_mobility_disabled))
return MIGRATE_UNMOVABLE; /* Group based on mobility */
return (gfp_flags & GFP_MOVABLE_MASK) >> GFP_MOVABLE_SHIFT;--------------------------这里面只会与__GFP_RECLAIMABLE|__GFP_MOVABLE,然后右移3bit,就将___GFP_MOVABLE转换到MIGRATE_MOVABLE,将__GFP_RECLAIMABLE转换到MIGRATE_RECLAIMABLE。
}

由于此次申请的gfp_mask可知没有___GFP_MOVABLE,所以alloc_flags不会包括ALLOC_CMA。反之,如果要复用CMA进行内存申请,需要在gfp_mask中包括__GFP_MOVABLE。

从Normal区域空闲页面可以看出,有58个4MB空闲,但是属于CMA区域。所以申请不成功。

3.3 问题的根源

结合warn_alloc()和实例归纳如下:

1. 虽然存在很多空闲内存,但是alloc_ep_req()无法使用

由于alloc_ep_req()申请内存的gfp_mask为GFP_ATOMIC|__GFP_COMP。

由于不具备__GFP_MOVABLE,所以即使存在很多空闲4MB连续页面,也无法使用,因为这些4MB页面都是CMA的。

[ 2161.785225] Normal: *4kB (UEC) *8kB (EC) *16kB (UEC) *32kB (UE) *64kB (UE) *128kB (UE) *256kB (EC) *512kB (E) *1024kB (UEC) *2048kB (UEC) *4096kB (C) = 248344kB-----光4MB CMA就达到了232M,其他只有16MB。

2. 为什么剩下的内存绝大部分是CMA?

从Normal区域空闲页面情况看,绝大部分都是CMA的。但是初始化的时候存在很多其他类型的页面。

通过cat /proc/pagetypeinfo查看前后对比,可以发现Movable类型的页面基本被申请完。

所以这里怀疑是内存泄漏,通过下面脚本跟踪MemFree。

while true; do cat /proc/meminfo | grep MemFree; sleep ; done

发现内存在不停的下降,达到260M左右的时候出现warn_alloc()。

所以问题的根源在内存泄漏。

3. 如何降低内存碎片?

对内存碎片,可以提供页面规整来解决。请参考《Linux内存管理 (16)内存规整

4. 调整/proc/sys/vm/min_free_kbytes

05-04 02:56