D:\Workspace\........\RTE\Device>STM32CubeMX.exe
-s project.script
-tpl_path C:\Keil5\ARM\Pack\Keil\STM32F4xx_DFP\2.5.0\MDK\CubeMX\
-dest_path [D:\Workspace\........\RTE\Device\]STM32F407IGHx\
使用 D:\Workspace\........\RTE\Device\project.script
load STM32F405RGTx
project name STCubeGenerated
project toolchain "MDK-ARM V5"
project path Z:\MDKARM\RTE\Device\STM32F405RGTx\
生成 D:\Workspace\........\RTE\Device\STM32F407IGHx\MX_Device.h
/******************************************************************************
* File Name : MX_Device.h
* Date : 08/10/2017 11:03:38
* Description : STM32Cube MX parameter definitions
* Note : This file is generated by STM32CubeMX (DO NOT EDIT!)
******************************************************************************/ #ifndef __MX_DEVICE_H
#define __MX_DEVICE_H /*---------------------------- Clock Configuration ---------------------------*/ #define MX_LSI_VALUE 32000
#define MX_LSE_VALUE 32768
#define MX_HSI_VALUE 16000000
#define MX_HSE_VALUE 25000000
#define MX_EXTERNAL_CLOCK_VALUE 12288000
#define MX_PLLCLKFreq_Value 96000000
#define MX_SYSCLKFreq_VALUE 16000000
#define MX_HCLKFreq_Value 16000000
#define MX_FCLKCortexFreq_Value 16000000
#define MX_CortexFreq_Value 16000000
#define MX_AHBFreq_Value 16000000
#define MX_APB1Freq_Value 16000000
#define MX_APB2Freq_Value 16000000
#define MX_APB1TimFreq_Value 16000000
#define MX_APB2TimFreq_Value 16000000
#define MX_48MHZClocksFreq_Value 48000000
#define MX_EthernetFreq_Value 16000000
#define MX_I2SClocksFreq_Value 96000000
#define MX_RTCFreq_Value 32000
#define MX_WatchDogFreq_Value 32000
#define MX_MCO1PinFreq_Value 16000000
#define MX_MCO2PinFreq_Value 16000000 /*-------------------------------- CAN1 --------------------------------*/ #define MX_CAN1 1 /* GPIO Configuration */ /* Pin PA11 */
#define MX_CAN1_RX_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH
#define MX_CAN1_RX_Pin PA11
#define MX_CAN1_RX_GPIOx GPIOA
#define MX_CAN1_RX_GPIO_PuPd GPIO_NOPULL
#define MX_CAN1_RX_GPIO_Pin GPIO_PIN_11
#define MX_CAN1_RX_GPIO_AF GPIO_AF9_CAN1
#define MX_CAN1_RX_GPIO_Mode GPIO_MODE_AF_PP /* Pin PA12 */
#define MX_CAN1_TX_GPIO_Speed GPIO_SPEED_FREQ_VERY_HIGH
#define MX_CAN1_TX_Pin PA12
#define MX_CAN1_TX_GPIOx GPIOA
#define MX_CAN1_TX_GPIO_PuPd GPIO_NOPULL
#define MX_CAN1_TX_GPIO_Pin GPIO_PIN_12
#define MX_CAN1_TX_GPIO_AF GPIO_AF9_CAN1
#define MX_CAN1_TX_GPIO_Mode GPIO_MODE_AF_PP /*-------------------------------- SYS --------------------------------*/ #define MX_SYS 1 /* GPIO Configuration */ /*-------------------------------- NVIC --------------------------------*/ #define MX_NVIC 1 /*-------------------------------- GPIO --------------------------------*/ #define MX_GPIO 1 /* GPIO Configuration */ /* Pin PB1 */
#define MX_PB1_GPIO_Speed GPIO_SPEED_FREQ_LOW
#define MX_PB1_Pin PB1
#define MX_PB1_GPIOx GPIOB
#define MX_PB1_PinState GPIO_PIN_RESET
#define MX_PB1_GPIO_PuPd GPIO_NOPULL
#define MX_PB1_GPIO_Pin GPIO_PIN_1
#define MX_PB1_GPIO_ModeDefaultOutputPP GPIO_MODE_OUTPUT_PP /* Pin PB0 */
#define MX_PB0_GPIO_Speed GPIO_SPEED_FREQ_LOW
#define MX_PB0_Pin PB0
#define MX_PB0_GPIOx GPIOB
#define MX_PB0_PinState GPIO_PIN_RESET
#define MX_PB0_GPIO_PuPd GPIO_NOPULL
#define MX_PB0_GPIO_Pin GPIO_PIN_0
#define MX_PB0_GPIO_ModeDefaultOutputPP GPIO_MODE_OUTPUT_PP #endif /* __MX_DEVICE_H */
生成 D:\Workspace\........\RTE\Device\STM32F407IGHx\FrameworkCubeMX.gpdsc
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- ******************************************************************************
* File Name : FrameworkCubeMX.gpdsc
* Date : 08/10/2017 11:03:38
* Description : Generator PDSC File generated by STM32CubeMX (DO NOT EDIT!)
****************************************************************************** --> <package xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="1.0" xs:noNamespaceSchemaLocation="PACK.xsd">
<vendor>Keil</vendor>
<name>FrameworkCubeMX</name>
<description>STM32CubeMX generated pack description</description>
<url>project-path</url>
<releases>
<release version="1.0.0">
- Generated: 08/10/2017 11:03:38
</release>
</releases>
<generators>
<generator id="STM32CubeMX" Gvendor="STMicroelectronics" Gtool="STM32CubeMX" Gversion="4.10.0">
<description>STM32CubeMX Environment</description>
<select Dname="STM32F405RGTx" Dvendor="STMicroelectronics:13"/>
<command>$SMDK\CubeMX\STM32CubeMXLauncher</command>
<workingDir>$PRTE\Device\STM32F405RGTx</workingDir>
<project_files>
<file category="source" name="STCubeGenerated/Src/main.c" />
<file category="header" name="STCubeGenerated/Inc/stm32f4xx_it.h"/>
<file category="source" name="STCubeGenerated/Src/stm32f4xx_it.c"/>
</project_files>
</generator>
</generators>
<taxonomy>
<description Cclass="Device" Cgroup="STM32Cube Framework" generator="STM32CubeMX">STM32Cube Framework</description>
</taxonomy>
<conditions>
<condition id="STCubeMX">
<description>Condition to include CMSIS core and Device Startup components</description>
<require Dvendor="STMicroelectronics:13" Dname="STM32F4*"/>
<require Cclass="CMSIS" Cgroup="CORE" Csub=""/>
<require Cclass="Device" Cgroup="Startup"/>
<require Cclass="Device" Cgroup="STM32Cube HAL" Csub="CAN"/>
<require Cclass="Device" Cgroup="STM32Cube HAL" Csub="GPIO"/>
</condition>
</conditions>
<components>
<component generator="STM32CubeMX" Cvendor="Keil" Cclass="Device" Cgroup="STM32Cube Framework" Csub="STM32CubeMX" Cversion="1.0.0" condition="STCubeMX">
<description>Configuration via STM32CubeMX</description>
<RTE_Components_h>
#define RTE_DEVICE_FRAMEWORK_CUBE_MX
</RTE_Components_h>
<files>
<file category="header" name="MX_Device.h"/>
<file category="header" name="STCubeGenerated/Inc/stm32f4xx_hal_conf.h"/>
<file category="source" name="STCubeGenerated/Src/stm32f4xx_hal_msp.c"/>
</files>
</component>
</components>
</package>
dest_path = D:\Workspace\........\RTE\Device\STM32F407IGHx\
STM32CubeMX 工程目录:D:\Workspace\........\RTE\Device\STM32F407IGHx\STCubeGenerated\
Keil -------------工程目录:D:\Workspace\........\RTE\Device\STM32F407IGHx\STCubeGenerated\MDK-ARM
MX_Device.h
/******************************************************************************
* File Name : MX_Device.h
* Date : 07/08/2015 18:06:21
* Description : STM32Cube MX parameter definitions
* Note : This file is generated by STM32CubeMX (DO NOT EDIT!)
******************************************************************************/ #ifndef __MX_DEVICE_H
#define __MX_DEVICE_H /*---------------------------- Clock Configuration ---------------------------*/ #define MX_LSI_VALUE 32000
#define MX_LSE_VALUE 32768
#define MX_HSI_VALUE 16000000
#define MX_HSE_VALUE 25000000
#define MX_EXTERNAL_CLOCK_VALUE 12288000
#define MX_SYSCLKFreq_VALUE 16000000
#define MX_HCLKFreq_Value 16000000
#define MX_FCLKCortexFreq_Value 16000000
#define MX_CortexFreq_Value 16000000
#define MX_AHBFreq_Value 16000000
#define MX_APB1Freq_Value 16000000
#define MX_APB2Freq_Value 16000000
#define MX_APB1TimFreq_Value 16000000
#define MX_APB2TimFreq_Value 16000000
#define MX_48MHZClocksFreq_Value 48000000
#define MX_EthernetFreq_Value 16000000
#define MX_I2SClocksFreq_Value 96000000
#define MX_WatchDogFreq_Value 32000
#define MX_RTCFreq_Value 32000
#define MX_MCO1PinFreq_Value 16000000
#define MX_MCO2PinFreq_Value 16000000 /*-------------------------------- NVIC --------------------------------*/ #define MX_NVIC 1 /*-------------------------------- USART1 --------------------------------*/ #define MX_USART1 1 #define MX_USART1_VM VM_ASYNC /* GPIO Configuration */ /* Pin PB7 */
#define MX_USART1_RX_Pin PB7
#define MX_USART1_RX_GPIO_AF GPIO_AF7_USART1
#define MX_USART1_RX_GPIO_Speed GPIO_SPEED_HIGH
#define MX_USART1_RX_GPIO_PuPd GPIO_PULLUP
#define MX_USART1_RX_GPIOx GPIOB
#define MX_USART1_RX_GPIO_Mode GPIO_MODE_AF_PP
#define MX_USART1_RX_GPIO_Pin GPIO_PIN_7 /* Pin PB6 */
#define MX_USART1_TX_Pin PB6
#define MX_USART1_TX_GPIO_AF GPIO_AF7_USART1
#define MX_USART1_TX_GPIO_Speed GPIO_SPEED_HIGH
#define MX_USART1_TX_GPIO_PuPd GPIO_PULLUP
#define MX_USART1_TX_GPIOx GPIOB
#define MX_USART1_TX_GPIO_Mode GPIO_MODE_AF_PP
#define MX_USART1_TX_GPIO_Pin GPIO_PIN_6 /*-------------------------------- USART2 --------------------------------*/ #define MX_USART2 1 #define MX_USART2_VM VM_ASYNC /* GPIO Configuration */ /* Pin PD5 */
#define MX_USART2_TX_Pin PD5
#define MX_USART2_TX_GPIO_AF GPIO_AF7_USART2
#define MX_USART2_TX_GPIO_Speed GPIO_SPEED_HIGH
#define MX_USART2_TX_GPIO_PuPd GPIO_PULLUP
#define MX_USART2_TX_GPIOx GPIOD
#define MX_USART2_TX_GPIO_Mode GPIO_MODE_AF_PP
#define MX_USART2_TX_GPIO_Pin GPIO_PIN_5 /* Pin PD6 */
#define MX_USART2_RX_Pin PD6
#define MX_USART2_RX_GPIO_AF GPIO_AF7_USART2
#define MX_USART2_RX_GPIO_Speed GPIO_SPEED_HIGH
#define MX_USART2_RX_GPIO_PuPd GPIO_PULLUP
#define MX_USART2_RX_GPIOx GPIOD
#define MX_USART2_RX_GPIO_Mode GPIO_MODE_AF_PP
#define MX_USART2_RX_GPIO_Pin GPIO_PIN_6 /*-------------------------------- GPIO --------------------------------*/ #define MX_GPIO 1 /* GPIO Configuration */ #endif /* __MX_DEVICE_H */